X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=arch%2Farm%2FKconfig;h=f58f8fb23594164d224800fd34184365eef7cb0e;hb=ecb76eff56a312f4a69fd9a8ac839db646256b00;hp=ded7c11a4c2a53a11a77b86ed8f83a23f6d37792;hpb=da206916a14fc8ab8962763c47673128a29b4b9c;p=oweals%2Fu-boot.git

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ded7c11a4c..f58f8fb235 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -858,6 +858,7 @@ config ARCH_SUNXI
 	select DM_GPIO
 	select DM_KEYBOARD
 	select DM_MMC if MMC
+	select DM_SCSI if SCSI
 	select DM_SERIAL
 	select DM_USB if DISTRO_DEFAULTS
 	select OF_BOARD_SETUP
@@ -1005,6 +1006,7 @@ config TARGET_LS2080A_EMU
 	select ARCH_MISC_INIT
 	select ARM64
 	select ARMV8_MULTIENTRY
+	select FSL_DDR_SYNC_REFRESH
 	help
 	  Support for Freescale LS2080A_EMU platform
 	  The LS2080A Development System (EMULATOR) is a pre silicon
@@ -1031,6 +1033,7 @@ config TARGET_LS1088AQDS
 	select ARMV8_MULTIENTRY
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
+	select FSL_DDR_INTERACTIVE if !SD_BOOT
 	help
 	  Support for NXP LS1088AQDS platform
 	  The LS1088A Development System (QDS) is a high-performance
@@ -1047,6 +1050,8 @@ config TARGET_LS2080AQDS
 	select SUPPORT_SPL
 	imply SCSI
 	imply SCSI_AHCI
+	select FSL_DDR_BIST
+	select FSL_DDR_INTERACTIVE if !SPL
 	help
 	  Support for Freescale LS2080AQDS platform
 	  The LS2080A Development System (QDS) is a high-performance
@@ -1061,6 +1066,8 @@ config TARGET_LS2080ARDB
 	select ARMV8_MULTIENTRY
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
+	select FSL_DDR_BIST
+	select FSL_DDR_INTERACTIVE if !SPL
 	imply SCSI
 	imply SCSI_AHCI
 	help
@@ -1205,6 +1212,7 @@ config TARGET_LS1088ARDB
 	select ARMV8_MULTIENTRY
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
+	select FSL_DDR_INTERACTIVE if !SD_BOOT
 	help
 	  Support for NXP LS1088ARDB platform.
 	  The LS1088A Reference design board (RDB) is a high-performance
@@ -1223,6 +1231,7 @@ config TARGET_LS1021AQDS
 	select LS1_DEEP_SLEEP
 	select SUPPORT_SPL
 	select SYS_FSL_DDR
+	select FSL_DDR_INTERACTIVE
 	imply SCSI
 
 config TARGET_LS1021ATWR
@@ -1262,6 +1271,7 @@ config TARGET_LS1043AQDS
 	select BOARD_EARLY_INIT_F
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
+	select FSL_DDR_INTERACTIVE if !SPL
 	imply SCSI
 	imply SCSI_AHCI
 	help
@@ -1287,6 +1297,9 @@ config TARGET_LS1046AQDS
 	select BOARD_LATE_INIT
 	select DM_SPI_FLASH if DM_SPI
 	select SUPPORT_SPL
+	select FSL_DDR_BIST if !SPL
+	select FSL_DDR_INTERACTIVE  if !SPL
+	select FSL_DDR_INTERACTIVE if !SPL
 	imply SCSI
 	help
 	  Support for Freescale LS1046AQDS platform.
@@ -1304,6 +1317,8 @@ config TARGET_LS1046ARDB
 	select DM_SPI_FLASH if DM_SPI
 	select POWER_MC34VR500
 	select SUPPORT_SPL
+	select FSL_DDR_BIST
+	select FSL_DDR_INTERACTIVE if !SPL
 	imply SCSI
 	help
 	  Support for Freescale LS1046ARDB platform.
@@ -1390,11 +1405,15 @@ config ARCH_STM32MP
 	select SYSRESET
 	select SYS_THUMB_BUILD
 	imply CMD_DM
+	imply CMD_POWEROFF
+	imply ENV_VARS_UBOOT_RUNTIME_CONFIG
 	help
 	  Support for STM32MP SoC family developed by STMicroelectronics,
 	  MPUs based on ARM cortex A core
-	  U-BOOT is running in DDR and SPL support is the unsecure First Stage
-	  BootLoader (FSBL)
+	  U-BOOT is running in DDR, loaded by the First Stage BootLoader (FSBL).
+	  FSBL can be TF-A: Trusted Firmware for Cortex A, for trusted boot
+	  chain.
+	  SPL is the unsecure FSBL for the basic boot chain.
 
 config ARCH_ROCKCHIP
 	bool "Support Rockchip SoCs"
@@ -1451,6 +1470,21 @@ config TI_SECURE_DEVICE
 	  authenticated) and the code. See the doc/README.ti-secure
 	  file for further details.
 
+if AM43XX || AM33XX || OMAP54XX || ARCH_KEYSTONE
+config ISW_ENTRY_ADDR
+	hex "Address in memory or XIP address of bootloader entry point"
+	default 0x402F4000 if AM43XX
+	default 0x402F0400 if AM33XX
+	default 0x40301350 if OMAP54XX
+	help
+	  After any reset, the boot ROM searches the boot media for a valid
+	  boot image. For non-XIP devices, the ROM then copies the image into
+	  internal memory. For all boot modes, after the ROM processes the
+	  boot image it eventually computes the entry point address depending
+	  on the device type (secure/non-secure), boot media (xip/non-xip) and
+	  image headers.
+endif
+
 source "arch/arm/mach-aspeed/Kconfig"
 
 source "arch/arm/mach-at91/Kconfig"
@@ -1550,6 +1584,7 @@ source "arch/arm/cpu/armv8/Kconfig"
 source "arch/arm/mach-imx/Kconfig"
 
 source "board/bosch/shc/Kconfig"
+source "board/bosch/guardian/Kconfig"
 source "board/CarMediaLab/flea3/Kconfig"
 source "board/Marvell/aspenite/Kconfig"
 source "board/Marvell/gplugd/Kconfig"