X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=README;h=a514f48caefc68b8453b8cc7ce0da3581f3504a8;hb=0a5228be868622894a5f8f226203cd7bac562187;hp=b81500f6afdd8da522d576933b85e3f7c750c788;hpb=e5fd39c886485e3dec77f4438a6e364c2987cf5f;p=oweals%2Fu-boot.git

diff --git a/README b/README
index b81500f6af..a514f48cae 100644
--- a/README
+++ b/README
@@ -687,22 +687,6 @@ The following options need to be configured:
 		as a convenience, when switching between booting from
 		RAM and NFS.
 
-- Pre-Boot Commands:
-		CONFIG_PREBOOT
-
-		When this option is #defined, the existence of the
-		environment variable "preboot" will be checked
-		immediately before starting the CONFIG_BOOTDELAY
-		countdown and/or running the auto-boot command resp.
-		entering interactive mode.
-
-		This feature is especially useful when "preboot" is
-		automatically generated or modified. For an example
-		see the LWMON board specific code: here "preboot" is
-		modified when the user holds down a certain
-		combination of keys on the (special) keyboard when
-		booting the systems
-
 - Serial Download Echo Mode:
 		CONFIG_LOADS_ECHO
 		If defined to 1, all characters received during a
@@ -783,9 +767,6 @@ The following options need to be configured:
 		SoC, then define this variable and provide board
 		specific code for the "hw_watchdog_reset" function.
 
-		CONFIG_AT91_HW_WDT_TIMEOUT
-		specify the timeout in seconds. default 2 seconds.
-
 - Real-Time Clock:
 
 		When CONFIG_CMD_DATE is selected, the type of the RTC
@@ -1696,11 +1677,6 @@ The following options need to be configured:
 		  - CONFIG_SYS_OMAP24_I2C_SPEED4 speed channel 4
 		  - CONFIG_SYS_OMAP24_I2C_SLAVE4 slave addr channel 4
 
-		- drivers/i2c/zynq_i2c.c
-		  - activate this driver with CONFIG_SYS_I2C_ZYNQ
-		  - set CONFIG_SYS_I2C_ZYNQ_SPEED for speed setting
-		  - set CONFIG_SYS_I2C_ZYNQ_SLAVE for slave addr
-
 		- drivers/i2c/s3c24x0_i2c.c:
 		  - activate this driver with CONFIG_SYS_I2C_S3C24X0
 		  - This driver adds i2c buses (11 for Exynos5250, Exynos5420
@@ -2151,21 +2127,6 @@ The following options need to be configured:
 		this is instead controlled by the value of
 		/config/load-environment.
 
-- Serial Flash support
-		Usage requires an initial 'sf probe' to define the serial
-		flash parameters, followed by read/write/erase/update
-		commands.
-
-		The following defaults may be provided by the platform
-		to handle the common case when only a single serial
-		flash is present on the system.
-
-		CONFIG_SF_DEFAULT_BUS		Bus identifier
-		CONFIG_SF_DEFAULT_CS		Chip-select
-		CONFIG_SF_DEFAULT_MODE 		(see include/spi.h)
-		CONFIG_SF_DEFAULT_SPEED		in Hz
-
-
 - TFTP Fixed UDP Port:
 		CONFIG_TFTP_PORT