X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=README;h=9804cea91447ec52e76e90289c8cfe05586dc4ee;hb=34e24b620a559dab6111b067f7a42ed9853dfbea;hp=c5e6a1a4c8501caed773ad7b5b1e33d2df48c98c;hpb=47f7bcae8c0de8b2a8af7ca309744f041a6d1424;p=oweals%2Fu-boot.git

diff --git a/README b/README
index c5e6a1a4c8..9804cea914 100644
--- a/README
+++ b/README
@@ -704,6 +704,8 @@ The following options need to be configured:
 - Boot Delay:	CONFIG_BOOTDELAY - in seconds
 		Delay before automatically booting the default image;
 		set to -1 to disable autoboot.
+		set to -2 to autoboot with no delay and not check for abort
+		(even when CONFIG_ZERO_BOOTDELAY_CHECK is defined).
 
 		See doc/README.autoboot for these options that
 		work with CONFIG_BOOTDELAY. None are required.
@@ -814,6 +816,7 @@ The following options need to be configured:
 		CONFIG_CMD_IMLS		  List all found images
 		CONFIG_CMD_IMMAP	* IMMR dump support
 		CONFIG_CMD_IMPORTENV	* import an environment
+		CONFIG_CMD_INI		* import data from an ini file into the env
 		CONFIG_CMD_IRQ		* irqinfo
 		CONFIG_CMD_ITEST	  Integer/string test of 2 values
 		CONFIG_CMD_JFFS2	* JFFS2 Support
@@ -855,7 +858,8 @@ The following options need to be configured:
 		CONFIG_CMD_SPI		* SPI serial bus support
 		CONFIG_CMD_TFTPSRV	* TFTP transfer in server mode
 		CONFIG_CMD_TFTPPUT	* TFTP put command (upload)
-		CONFIG_CMD_TIME		* run command and report execution time
+		CONFIG_CMD_TIME		* run command and report execution time (ARM specific)
+		CONFIG_CMD_TIMER	* access to the system tick timer
 		CONFIG_CMD_USB		* USB support
 		CONFIG_CMD_CDP		* Cisco Discover Protocol support
 		CONFIG_CMD_MFSL		* Microblaze FSL support
@@ -1264,6 +1268,9 @@ The following options need to be configured:
 		viewport is supported.
 		To enable the ULPI layer support, define CONFIG_USB_ULPI and
 		CONFIG_USB_ULPI_VIEWPORT in your board configuration file.
+		If your ULPI phy needs a different reference clock than the
+		standard 24 MHz then you have to define CONFIG_ULPI_REF_CLK to
+		the appropriate value in Hz.
 
 - MMC Support:
 		The MMC controller on the Intel PXA is supported. To
@@ -1483,6 +1490,12 @@ The following options need to be configured:
 		can be displayed via the splashscreen support or the
 		bmp command.
 
+- Do compresssing for memory range:
+		CONFIG_CMD_ZIP
+
+		If this option is set, it would use zlib deflate method
+		to compress the specified memory at its best effort.
+
 - Compression support:
 		CONFIG_BZIP2
 
@@ -2669,6 +2682,9 @@ FIT uImage format:
 		CONFIG_SPL_SPI_SUPPORT
 		Support for drivers/spi/libspi.o in SPL binary
 
+		CONFIG_SPL_RAM_DEVICE
+		Support for running image already present in ram, in SPL binary
+
 		CONFIG_SPL_LIBGENERIC_SUPPORT
 		Support for lib/libgeneric.o in SPL binary
 
@@ -4679,7 +4695,10 @@ Over time, many people have reported problems when trying to use the
 consider minicom to be broken, and recommend not to use it. Under
 Unix, I recommend to use C-Kermit for general purpose use (and
 especially for kermit binary protocol download ("loadb" command), and
-use "cu" for S-Record download ("loads" command).
+use "cu" for S-Record download ("loads" command).  See
+http://www.denx.de/wiki/view/DULG/SystemSetup#Section_4.3.
+for help with kermit.
+
 
 Nevertheless, if you absolutely want to use it try adding this
 configuration to your "File transfer protocols" section: