X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=README;h=453189156c818d0fa49c2468dc49157cabbf4d44;hb=81ac7e51ccf2984e9c0964a883d6b7e8fe875aad;hp=e45ae4a1351fd785566f978cb7bf92a8ee8b2d1e;hpb=b27673ccbd3d5435319b5c09c3e7061f559f925d;p=oweals%2Fu-boot.git diff --git a/README b/README index e45ae4a135..453189156c 100644 --- a/README +++ b/README @@ -485,6 +485,7 @@ The following options need to be configured: Thumb2 this flag will result in Thumb2 code generated by GCC. + CONFIG_ARM_ERRATA_716044 CONFIG_ARM_ERRATA_742230 CONFIG_ARM_ERRATA_743622 CONFIG_ARM_ERRATA_751472 @@ -495,6 +496,13 @@ The following options need to be configured: exists, unlike the similar options in the Linux kernel. Do not set these options unless they apply! +- CPU timer options: + CONFIG_SYS_HZ + + The frequency of the timer returned by get_timer(). + get_timer() must operate in milliseconds and this CONFIG + option must be set to 1000. + - Linux Kernel Interface: CONFIG_CLOCKS_IN_MHZ @@ -626,14 +634,6 @@ The following options need to be configured: boot loader that has already initialized the UART. Define this variable to flush the UART at init time. - CONFIG_SYS_NS16550_BROKEN_TEMT - - 16550 UART set the Transmitter Empty (TEMT) Bit when all output - has finished and the transmitter is totally empty. U-Boot waits - for this bit to be set to initialize the serial console. On some - broken platforms this bit is not set in SPL making U-Boot to - hang while waiting for TEMT. Define this option to avoid it. - - Console Interface: Depending on board, define exactly one serial port @@ -870,7 +870,8 @@ The following options need to be configured: (requires CONFIG_CMD_MEMORY and CONFIG_MD5) CONFIG_CMD_MEMINFO * Display detailed memory information CONFIG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base, - loop, loopw, mtest + loop, loopw + CONFIG_CMD_MEMTEST mtest CONFIG_CMD_MISC Misc functions like sleep etc CONFIG_CMD_MMC * MMC memory mapped support CONFIG_CMD_MII * MII utility commands @@ -1335,6 +1336,29 @@ The following options need to be configured: CONFIG_SH_MMCIF_CLK Define the clock frequency for MMCIF +- USB Device Firmware Update (DFU) class support: + CONFIG_DFU_FUNCTION + This enables the USB portion of the DFU USB class + + CONFIG_CMD_DFU + This enables the command "dfu" which is used to have + U-Boot create a DFU class device via USB. This command + requires that the "dfu_alt_info" environment variable be + set and define the alt settings to expose to the host. + + CONFIG_DFU_MMC + This enables support for exposing (e)MMC devices via DFU. + + CONFIG_DFU_NAND + This enables support for exposing NAND devices via DFU. + + CONFIG_SYS_DFU_MAX_FILE_SIZE + When updating files rather than the raw storage device, + we use a static buffer to copy the file into and then write + the buffer once we've been given the whole file. Define + this to the maximum filesize (in bytes) for the buffer. + Default is 4 MiB if undefined. + - Journaling Flash filesystem support: CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE, CONFIG_JFFS2_NAND_DEV @@ -1936,15 +1960,15 @@ CBFS (Coreboot Filesystem) support I2C_READ - Code that returns TRUE if the I2C data line is high, - FALSE if it is low. + Code that returns true if the I2C data line is high, + false if it is low. eg: #define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) I2C_SDA(bit) - If is TRUE, sets the I2C data line high. If it - is FALSE, it clears it (low). + If is true, sets the I2C data line high. If it + is false, it clears it (low). eg: #define I2C_SDA(bit) \ if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ @@ -1952,8 +1976,8 @@ CBFS (Coreboot Filesystem) support I2C_SCL(bit) - If is TRUE, sets the I2C clock line high. If it - is FALSE, it clears it (low). + If is true, sets the I2C clock line high. If it + is false, it clears it (low). eg: #define I2C_SCL(bit) \ if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ @@ -2774,6 +2798,32 @@ FIT uImage format: Adds the MTD partitioning infrastructure from the Linux kernel. Needed for UBI support. +- UBI support + CONFIG_CMD_UBI + + Adds commands for interacting with MTD partitions formatted + with the UBI flash translation layer + + Requires also defining CONFIG_RBTREE + + CONFIG_UBI_SILENCE_MSG + + Make the verbose messages from UBI stop printing. This leaves + warnings and errors enabled. + +- UBIFS support + CONFIG_CMD_UBIFS + + Adds commands for interacting with UBI volumes formatted as + UBIFS. UBIFS is read-only in u-boot. + + Requires UBI support as well as CONFIG_LZO + + CONFIG_UBIFS_SILENCE_MSG + + Make the verbose messages from UBIFS stop printing. This leaves + warnings and errors enabled. + - SPL framework CONFIG_SPL Enable building of SPL globally. @@ -2781,8 +2831,18 @@ FIT uImage format: CONFIG_SPL_LDSCRIPT LDSCRIPT for linking the SPL binary. + CONFIG_SPL_MAX_FOOTPRINT + Maximum size in memory allocated to the SPL, BSS included. + When defined, the linker checks that the actual memory + used by SPL from _start to __bss_end does not exceed it. + CONFIG_SPL_MAX_FOOTPRINT and CONFIG_SPL_BSS_MAX_SIZE + must not be both defined at the same time. + CONFIG_SPL_MAX_SIZE - Maximum binary size (text, data and rodata) of the SPL binary. + Maximum size of the SPL image (text, data, rodata, and + linker lists sections), BSS excluded. + When defined, the linker checks that the actual size does + not exceed it. CONFIG_SPL_TEXT_BASE TEXT_BASE for linking the SPL binary. @@ -2795,7 +2855,11 @@ FIT uImage format: Link address for the BSS within the SPL binary. CONFIG_SPL_BSS_MAX_SIZE - Maximum binary size of the BSS section of the SPL binary. + Maximum size in memory allocated to the SPL BSS. + When defined, the linker checks that the actual memory used + by SPL from __bss_start to __bss_end does not exceed it. + CONFIG_SPL_MAX_FOOTPRINT and CONFIG_SPL_BSS_MAX_SIZE + must not be both defined at the same time. CONFIG_SPL_STACK Adress of the start of the stack SPL will use @@ -2914,8 +2978,11 @@ FIT uImage format: Support for lib/libgeneric.o in SPL binary CONFIG_SPL_PAD_TO - Linker address to which the SPL should be padded before - appending the SPL payload. + Image offset to which the SPL should be padded before appending + the SPL payload. By default, this is defined as + CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined. + CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL + payload without any padding, or >= CONFIG_SPL_MAX_SIZE. CONFIG_SPL_TARGET Final target image containing SPL and payload. Some SPLs @@ -3240,6 +3307,27 @@ Configuration Settings: If defined, don't allow the -f switch to env set override variable access flags. +- CONFIG_SYS_GENERIC_BOARD + This selects the architecture-generic board system instead of the + architecture-specific board files. It is intended to move boards + to this new framework over time. Defining this will disable the + arch/foo/lib/board.c file and use common/board_f.c and + common/board_r.c instead. To use this option your architecture + must support it (i.e. must define __HAVE_ARCH_GENERIC_BOARD in + its config.mk file). If you find problems enabling this option on + your board please report the problem and send patches! + +- CONFIG_SYS_SYM_OFFSETS + This is set by architectures that use offsets for link symbols + instead of absolute values. So bss_start is obtained using an + offset _bss_start_ofs from CONFIG_SYS_TEXT_BASE, rather than + directly. You should not need to touch this setting. + +- CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC (OMAP only) + This is set by OMAP boards for the max time that reset should + be asserted. See doc/README.omap-reset-time for details on how + the value can be calulated on a given board. + The following definitions that deal with the placement and management of environment data (variable area); in general, we support the following configurations: @@ -3473,6 +3561,33 @@ but it can not erase, write this NOR flash by SRIO or PCIE interface. environment. If redundant environment is used, it will be copied to CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE. +- CONFIG_ENV_IS_IN_UBI: + + Define this if you have an UBI volume that you want to use for the + environment. This has the benefit of wear-leveling the environment + accesses, which is important on NAND. + + - CONFIG_ENV_UBI_PART: + + Define this to a string that is the mtd partition containing the UBI. + + - CONFIG_ENV_UBI_VOLUME: + + Define this to the name of the volume that you want to store the + environment in. + + - CONFIG_ENV_UBI_VOLUME_REDUND: + + Define this to the name of another volume to store a second copy of + the environment in. This will enable redundant environments in UBI. + It is assumed that both volumes are in the same MTD partition. + + - CONFIG_UBI_SILENCE_MSG + - CONFIG_UBIFS_SILENCE_MSG + + You will probably want to define these to avoid a really noisy system + when storing the env in UBI. + - CONFIG_SYS_SPI_INIT_OFFSET Defines offset to the initial SPI buffer area in DPRAM. The @@ -3744,9 +3859,13 @@ Low Level (hardware related) configuration options: - CONFIG_SYS_SRIOn_MEM_SIZE: Size of SRIO port 'n' memory region -- CONFIG_SYS_NDFC_16 - Defined to tell the NDFC that the NAND chip is using a - 16 bit bus. +- CONFIG_SYS_NAND_BUSWIDTH_16BIT + Defined to tell the NAND controller that the NAND chip is using + a 16 bit bus. + Not all NAND drivers use this symbol. + Example of drivers that use it: + - drivers/mtd/nand/ndfc.c + - drivers/mtd/nand/mxc_nand.c - CONFIG_SYS_NDFC_EBC0_CFG Sets the EBC0_CFG register for the NDFC. If not defined @@ -3860,6 +3979,10 @@ Low Level (hardware related) configuration options: If defined, the x86 reset vector code is included. This is not needed when U-Boot is running from Coreboot. +- CONFIG_SYS_MPUCLK + Defines the MPU clock speed (in MHz). + + NOTE : currently only supported on AM335x platforms. Freescale QE/FMAN Firmware Support: -----------------------------------