X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=README;h=2df0e1f8a78e66f075a6c5c0991402440f064c4f;hb=6e6cf015e7cdd7ca83a933320a81201972bd5e5e;hp=fc40ddfb27604ade74c216aa6328b8bb2a56f5f5;hpb=a0e80c97c9ba1409c2370f6c8b2a4d6a48cdb15c;p=oweals%2Fu-boot.git diff --git a/README b/README index fc40ddfb27..2df0e1f8a7 100644 --- a/README +++ b/README @@ -312,6 +312,19 @@ Many of the options are named exactly as the corresponding Linux kernel configuration options. The intention is to make it easier to build a config tool - later. +- ARM Platform Bus Type(CCI): + CoreLink Cache Coherent Interconnect (CCI) is ARM BUS which + provides full cache coherency between two clusters of multi-core + CPUs and I/O coherency for devices and I/O masters + + CONFIG_SYS_FSL_HAS_CCI400 + + Defined For SoC that has cache coherent interconnect + CCN-400 + + CONFIG_SYS_FSL_HAS_CCN504 + + Defined for SoC that has cache coherent interconnect CCN-504 The following options need to be configured: @@ -776,7 +789,7 @@ The following options need to be configured: binary in its image. This device tree file should be in the board directory and called -.dts. The binary file is then picked up in board_init_f() and made available through - the global data structure as gd->blob. + the global data structure as gd->fdt_blob. CONFIG_OF_SEPARATE If this variable is defined, U-Boot will build a device tree @@ -1015,21 +1028,6 @@ The following options need to be configured: control registers. This behavior won't affect the correctnessof 10/100 link speed update. - CONFIG_SMC911X - Support for SMSC's LAN911x and LAN921x chips - - CONFIG_SMC911X_BASE - Define this to hold the physical address - of the device (I/O space) - - CONFIG_SMC911X_32_BIT - Define this if data bus is 32 bits - - CONFIG_SMC911X_16_BIT - Define this if data bus is 16 bits. If your processor - automatically converts one 32 bit word to two 16 bit - words you may also try CONFIG_SMC911X_32_BIT. - CONFIG_SH_ETHER Support for Renesas on-chip Ethernet controller @@ -2299,13 +2297,6 @@ The following options need to be configured: this is instead controlled by the value of /config/load-environment. -- DataFlash Support: - CONFIG_HAS_DATAFLASH - - Defining this option enables DataFlash features and - allows to read/write in Dataflash via the standard - commands cp, md... - - Serial Flash support Usage requires an initial 'sf probe' to define the serial flash parameters, followed by read/write/erase/update @@ -2371,6 +2362,13 @@ The following options need to be configured: CONFIG_SYS_BOOTCOUNT_ADDR = i2c addr which is used for the bootcounter. CONFIG_BOOTCOUNT_ALEN = address len + CONFIG_BOOTCOUNT_EXT + enable support for the bootcounter in EXT filesystem + CONFIG_SYS_BOOTCOUNT_ADDR = RAM address used for read + and write. + CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE = interface + CONFIG_SYS_BOOTCOUNT_EXT_DEVPART = device and part + CONFIG_SYS_BOOTCOUNT_EXT_NAME = filename - Show boot progress: CONFIG_SHOW_BOOT_PROGRESS @@ -5161,7 +5159,7 @@ may be rejected, even when they contain important and valuable stuff. Please see http://www.denx.de/wiki/U-Boot/Patches for details. Patches shall be sent to the u-boot mailing list ; -see http://lists.denx.de/mailman/listinfo/u-boot +see https://lists.denx.de/listinfo/u-boot When you send a patch, please include the following information with it: