X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=README;h=2a553c274c372b014075cf67387dea964bd0722d;hb=268405fa7c44156c5192a70779920c70906af8d6;hp=9455fa76077706532ab782bc35a5a3f36e75eb38;hpb=4cc64742a89e8ce90c69c3c85e4e9f4706062f2f;p=oweals%2Fu-boot.git

diff --git a/README b/README
index 9455fa7607..2a553c274c 100644
--- a/README
+++ b/README
@@ -381,6 +381,24 @@ The following options need to be configured:
 		This define fills in the correct boot CPU in the boot
 		param header, the default value is zero if undefined.
 
+- vxWorks boot parameters:
+
+		bootvx constructs a valid bootline using the following
+		environments variables: bootfile, ipaddr, serverip, hostname.
+		It loads the vxWorks image pointed bootfile.
+
+		CONFIG_SYS_VXWORKS_BOOT_DEVICE - The vxworks device name
+		CONFIG_SYS_VXWORKS_MAC_PTR - Ethernet 6 byte MA -address
+		CONFIG_SYS_VXWORKS_SERVERNAME - Name of the server
+		CONFIG_SYS_VXWORKS_BOOT_ADDR - Address of boot parameters
+
+		CONFIG_SYS_VXWORKS_ADD_PARAMS
+
+		Add it at the end of the bootline. E.g "u=username pw=secret"
+
+		Note: If a "bootargs" environment is defined, it will overwride
+		the defaults discussed just above.
+
 - Serial Ports:
 		CONFIG_PL010_SERIAL
 
@@ -2157,6 +2175,11 @@ Configuration Settings:
 		This option also enables the building of the cfi_flash driver
 		in the drivers directory
 
+- CONFIG_FLASH_CFI_MTD
+		This option enables the building of the cfi_mtd driver
+		in the drivers directory. The driver exports CFI flash
+		to the MTD layer.
+
 - CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 		Use buffered writes to flash.