X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=Makefile;h=8e551eb555d12cf5e910b455872f01ee330c9042;hb=37ed6cdd4159195bfad68d8a237f6adda8f482cb;hp=17066ca8055f313996bbea94ca19a76e536d1546;hpb=430f1b0f9a670c2f13eaa52e66a10db96dd3647d;p=oweals%2Fu-boot.git

diff --git a/Makefile b/Makefile
index 17066ca805..8e551eb555 100644
--- a/Makefile
+++ b/Makefile
@@ -146,7 +146,7 @@ ifeq ($(ARCH),microblaze)
 CROSS_COMPILE = mb-
 endif
 ifeq ($(ARCH),blackfin)
-CROSS_COMPILE = bfin-elf-
+CROSS_COMPILE = bfin-uclinux-
 endif
 ifeq ($(ARCH),avr32)
 CROSS_COMPILE = avr32-
@@ -178,7 +178,15 @@ OBJS += cpu/$(CPU)/resetvec.o
 endif
 ifeq ($(CPU),bf533)
 OBJS += cpu/$(CPU)/start1.o	cpu/$(CPU)/interrupt.o	cpu/$(CPU)/cache.o
-OBJS += cpu/$(CPU)/cplbhdlr.o	cpu/$(CPU)/cplbmgr.o	cpu/$(CPU)/flush.o
+OBJS += cpu/$(CPU)/flush.o	cpu/$(CPU)/init_sdram.o
+endif
+ifeq ($(CPU),bf537)
+OBJS += cpu/$(CPU)/start1.o	cpu/$(CPU)/interrupt.o	cpu/$(CPU)/cache.o
+OBJS += cpu/$(CPU)/flush.o	cpu/$(CPU)/init_sdram.o
+endif
+ifeq ($(CPU),bf561)
+OBJS += cpu/$(CPU)/start1.o	cpu/$(CPU)/interrupt.o	cpu/$(CPU)/cache.o
+OBJS += cpu/$(CPU)/flush.o 	cpu/$(CPU)/init_sdram.o
 endif
 
 OBJS := $(addprefix $(obj),$(OBJS))
@@ -422,6 +430,7 @@ inka4x0_config:	unconfig
 	@$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
 
 lite5200b_config	\
+lite5200b_PM_config	\
 lite5200b_LOWBOOT_config:	unconfig
 	@mkdir -p $(obj)include
 	@mkdir -p $(obj)board/icecube
@@ -430,6 +439,10 @@ lite5200b_LOWBOOT_config:	unconfig
 	@ echo "... DDR memory revision"
 	@ echo "#define CONFIG_MPC5200"		>>$(obj)include/config.h
 	@ echo "#define CONFIG_LITE5200B"	>>$(obj)include/config.h
+	@[ -z "$(findstring _PM_,$@)" ] || \
+		{ echo "#define CONFIG_LITE5200B_PM"	>>$(obj)include/config.h ; \
+		  echo "... with power management (low-power mode) support" ; \
+		}
 	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
 		{ echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 		  echo "... with LOWBOOT configuration" ; \
@@ -2338,17 +2351,30 @@ suzaku_config:	unconfig
 	@echo "#define CONFIG_SUZAKU 1" >> $(obj)include/config.h
 	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
 
+ml401_config:	unconfig
+	@ >include/config.h
+	@echo "#define CONFIG_ML401 1" >> include/config.h
+	@./mkconfig -a $(@:_config=) microblaze microblaze ml401 xilinx
+
+xupv2p_config:	unconfig
+	@ >include/config.h
+	@echo "#define CONFIG_XUPV2P 1" >> include/config.h
+	@./mkconfig -a $(@:_config=) microblaze microblaze xupv2p xilinx
+
 #########################################################################
 ## Blackfin
 #########################################################################
-ezkit533_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) blackfin bf533 ezkit533
+bf533-ezkit_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) blackfin bf533 bf533-ezkit
+
+bf533-stamp_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) blackfin bf533 bf533-stamp
 
-stamp_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) blackfin bf533 stamp
+bf537-stamp_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) blackfin bf537 bf537-stamp
 
-dspstamp_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) blackfin bf533 dsp_stamp
+bf561-ezkit_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) blackfin bf561 bf561-ezkit
 
 #========================================================================
 # AVR32
@@ -2385,6 +2411,8 @@ clean:
 	rm -f $(obj)board/netstar/*.srec $(obj)board/netstar/*.bin
 	rm -f $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom
 	rm -f $(obj)board/integratorap/u-boot.lds $(obj)board/integratorcp/u-boot.lds
+	rm -f $(obj)board/bf533-ezkit/u-boot.lds $(obj)board/bf533-stamp/u-boot.lds
+	rm -f $(obj)board/bf537-stamp/u-boot.lds $(obj)board/bf561-ezkit/u-boot.lds
 	rm -f $(obj)include/bmp_logo.h
 	rm -f $(obj)nand_spl/u-boot-spl $(obj)nand_spl/u-boot-spl.map