X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=Makefile;h=66a09ac900c37511054b9fb30693b2daf0aeac15;hb=5df42b0603d50ea59e1039b31fe74c1309abdd3a;hp=c52a33b403239554e29779a213a53424bae86539;hpb=810ae23fbc57346508690425a785d44117e91182;p=oweals%2Fu-boot.git

diff --git a/Makefile b/Makefile
index c52a33b403..66a09ac900 100644
--- a/Makefile
+++ b/Makefile
@@ -3,7 +3,7 @@
 VERSION = 2019
 PATCHLEVEL = 04
 SUBLEVEL =
-EXTRAVERSION = -rc4
+EXTRAVERSION =
 NAME =
 
 # *DOCUMENTATION*
@@ -291,6 +291,9 @@ DARWIN_MINOR_VERSION	= $(shell sw_vers -productVersion | cut -f 2 -d '.')
 os_x_before	= $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
 	$(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
 
+os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \
+	$(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)	
+
 # Snow Leopards build environment has no longer restrictions as described above
 HOSTCC       = $(call os_x_before, 10, 5, "cc", "gcc")
 HOSTCFLAGS  += $(call os_x_before, 10, 4, "-traditional-cpp")
@@ -300,6 +303,10 @@ HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
 # in some host tools which is a problem then ... so disable ASLR for these
 # tools
 HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
+
+# macOS Mojave (10.14.X) 
+# Undefined symbols for architecture x86_64: "_PyArg_ParseTuple"
+HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "")
 endif
 
 # Decide whether to build built-in, modular, or both.
@@ -893,7 +900,7 @@ cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
 	>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
 
 quiet_cmd_mkfitimage = MKIMAGE $@
-cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@\
+cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@\
 	>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
 
 quiet_cmd_cat = CAT     $@
@@ -938,11 +945,22 @@ ifneq ($(CONFIG_DM_USB)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
 	@echo >&2 "===================================================="
 endif
 endif
-ifeq ($(CONFIG_LIBATA)$(CONFIG_MVSATA_IDE),y)
-ifneq ($(CONFIG_DM_SCSI),y)
+ifeq ($(CONFIG_MVSATA_IDE),y)
 	@echo >&2 "===================== WARNING ======================"
-	@echo >&2 "This board does not use CONFIG_DM_SCSI. Please update"
-	@echo >&2 "the storage controller to use CONFIG_DM_SCSI before the v2019.07 release."
+	@echo >&2 "This board does use CONFIG_MVSATA_IDE which is not"
+	@echo >&2 "ported to driver-model (DM) yet. Please update the storage"
+	@echo >&2 "controller driver to use CONFIG_AHCI before the v2019.07"
+	@echo >&2 "release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+ifeq ($(CONFIG_LIBATA),y)
+ifneq ($(CONFIG_AHCI),y)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does use CONFIG_LIBATA but has CONFIG_AHCI not"
+	@echo >&2 "enabled. Please update the storage controller driver to use"
+	@echo >&2 "CONFIG_AHCI before the v2019.07 release."
 	@echo >&2 "Failure to update by the deadline may result in board removal."
 	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
 	@echo >&2 "===================================================="
@@ -1013,6 +1031,20 @@ quiet_cmd_copy = COPY    $@
 
 ifeq ($(CONFIG_MULTI_DTB_FIT),y)
 
+ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
+FINAL_DTB_CONTAINER = fit-dtb.blob.lzo
+else ifeq ($(CONFIG_MULTI_DTB_FIT_GZIP),y)
+FINAL_DTB_CONTAINER = fit-dtb.blob.gz
+else
+FINAL_DTB_CONTAINER = fit-dtb.blob
+endif
+
+fit-dtb.blob.gz: fit-dtb.blob
+	@gzip -kf9 $< > $@
+
+fit-dtb.blob.lzo: fit-dtb.blob
+	@lzop -f9 $< > $@
+
 fit-dtb.blob: dts/dt.dtb FORCE
 	$(call if_changed,mkimage)
 
@@ -1020,8 +1052,13 @@ MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
 	-a 0 -e 0 -E \
 	$(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
 
-u-boot-fit-dtb.bin: u-boot-nodtb.bin fit-dtb.blob
+ifneq ($(EXT_DTB),)
+u-boot-fit-dtb.bin: u-boot-nodtb.bin $(EXT_DTB)
+		$(call if_changed,cat)
+else
+u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER)
 	$(call if_changed,cat)
+endif
 
 u-boot.bin: u-boot-fit-dtb.bin FORCE
 	$(call if_changed,copy)
@@ -1200,6 +1237,12 @@ u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
 	$(call if_changed,mkimage)
 	$(BOARD_SIZE_CHECK)
 
+ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
+MKIMAGEFLAGS_u-boot.itb =
+else
+MKIMAGEFLAGS_u-boot.itb = -E
+endif
+
 u-boot.itb: u-boot-nodtb.bin dts/dt.dtb $(U_BOOT_ITS) FORCE
 	$(call if_changed,mkfitimage)
 	$(BOARD_SIZE_CHECK)
@@ -1219,9 +1262,11 @@ else
 SPL_PAYLOAD := u-boot.bin
 endif
 
+SPL_IMAGE := $(CONFIG_SPL_IMAGE:"%"=%)
+
 OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
 				   --pad-to=$(CONFIG_SPL_PAD_TO)
-u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
+u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
 	$(call if_changed,pad_cat)
 
 ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)