X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=Makefile;h=4fc6a82f79a94d0375c53a81e303d799fa9f5c35;hb=31ac2d0c6af61b16ab8c3c6cefe61f53a06219d7;hp=947f3ff06ae3af1658ba73ebd4381b12fd2aa0ab;hpb=e66443fdb5355e68cfdbbdd37248c4b7eb4968f5;p=oweals%2Fu-boot.git

diff --git a/Makefile b/Makefile
index 947f3ff06a..4fc6a82f79 100644
--- a/Makefile
+++ b/Makefile
@@ -21,10 +21,10 @@
 # MA 02111-1307 USA
 #
 
-VERSION = 2012
-PATCHLEVEL = 07
+VERSION = 2013
+PATCHLEVEL = 01
 SUBLEVEL =
-EXTRAVERSION =
+EXTRAVERSION = -rc1
 ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
@@ -92,6 +92,24 @@ BUILD_DIR := $(O)
 endif
 endif
 
+# Call a source code checker (by default, "sparse") as part of the
+# C compilation.
+#
+# Use 'make C=1' to enable checking of re-compiled files.
+#
+# See the linux kernel file "Documentation/sparse.txt" for more details,
+# including where to get the "sparse" utility.
+
+ifdef C
+ifeq ("$(origin C)", "command line")
+CHECKSRC := $(C)
+endif
+endif
+ifndef CHECKSRC
+  CHECKSRC = 0
+endif
+export CHECKSRC
+
 ifneq ($(BUILD_DIR),)
 saved-output := $(BUILD_DIR)
 
@@ -238,17 +256,26 @@ ifdef SOC
 LIBS-y += $(CPUDIR)/$(SOC)/lib$(SOC).o
 endif
 ifeq ($(CPU),ixp)
-LIBS-y += arch/arm/cpu/ixp/npe/libnpe.o
+LIBS-y += drivers/net/npe/libnpe.o
 endif
 LIBS-$(CONFIG_OF_EMBED) += dts/libdts.o
 LIBS-y += arch/$(ARCH)/lib/lib$(ARCH).o
-LIBS-y += fs/cramfs/libcramfs.o fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o \
-	fs/reiserfs/libreiserfs.o fs/ext2/libext2fs.o fs/yaffs2/libyaffs2.o \
-	fs/ubifs/libubifs.o fs/zfs/libzfs.o
+LIBS-y += fs/libfs.o \
+	fs/cbfs/libcbfs.o \
+	fs/cramfs/libcramfs.o \
+	fs/ext4/libext4fs.o \
+	fs/fat/libfat.o \
+	fs/fdos/libfdos.o \
+	fs/jffs2/libjffs2.o \
+	fs/reiserfs/libreiserfs.o \
+	fs/ubifs/libubifs.o \
+	fs/yaffs2/libyaffs2.o \
+	fs/zfs/libzfs.o
 LIBS-y += net/libnet.o
 LIBS-y += disk/libdisk.o
 LIBS-y += drivers/bios_emulator/libatibiosemu.o
 LIBS-y += drivers/block/libblock.o
+LIBS-$(CONFIG_BOOTCOUNT_LIMIT) += drivers/bootcount/libbootcount.o
 LIBS-y += drivers/dma/libdma.o
 LIBS-y += drivers/fpga/libfpga.o
 LIBS-y += drivers/gpio/libgpio.o
@@ -268,6 +295,7 @@ LIBS-y += drivers/pci/libpci.o
 LIBS-y += drivers/pcmcia/libpcmcia.o
 LIBS-y += drivers/power/libpower.o
 LIBS-y += drivers/spi/libspi.o
+LIBS-y += drivers/dfu/libdfu.o
 ifeq ($(CPU),mpc83xx)
 LIBS-y += drivers/qe/libqe.o
 LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
@@ -305,11 +333,8 @@ ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
 LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
 endif
 
-ifeq ($(SOC),mx5)
-LIBS-y += $(CPUDIR)/imx-common/libimx-common.o
-endif
-ifeq ($(SOC),mx6)
-LIBS-y += $(CPUDIR)/imx-common/libimx-common.o
+ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35))
+LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o
 endif
 
 ifeq ($(SOC),s5pc1xx)
@@ -318,6 +343,11 @@ endif
 ifeq ($(SOC),exynos)
 LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o
 endif
+ifeq ($(SOC),tegra20)
+LIBS-y += arch/$(ARCH)/cpu/$(SOC)-common/lib$(SOC)-common.o
+LIBS-y += arch/$(ARCH)/cpu/tegra-common/libcputegra-common.o
+LIBS-y += $(CPUDIR)/tegra-common/libtegra-common.o
+endif
 
 LIBS := $(addprefix $(obj),$(sort $(LIBS-y)))
 .PHONY : $(LIBS)
@@ -373,10 +403,18 @@ ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map
 
 ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin
 ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin
-ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin
 ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
 ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
 
+# enable combined SPL/u-boot/dtb rules for tegra
+ifeq ($(SOC),tegra20)
+ifeq ($(CONFIG_OF_SEPARATE),y)
+ALL-y += $(obj)u-boot-dtb-tegra.bin
+else
+ALL-y += $(obj)u-boot-nodtb-tegra.bin
+endif
+endif
+
 all:		$(ALL-y) $(SUBDIR_EXAMPLES)
 
 $(obj)u-boot.dtb:	$(obj)u-boot
@@ -422,6 +460,11 @@ $(obj)u-boot.kwb:       $(obj)u-boot.bin
 		$(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
 		-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
 
+$(obj)u-boot.pbl:	$(obj)u-boot.bin
+		$(obj)tools/mkimage -n $(CONFIG_PBLRCW_CONFIG) \
+		-R $(CONFIG_PBLPBI_CONFIG) -T pblimage \
+		-d $< $@
+
 $(obj)u-boot.sha1:	$(obj)u-boot.bin
 		$(obj)tools/ubsha1 $(obj)u-boot.bin
 
@@ -436,20 +479,23 @@ $(obj)u-boot.ubl:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
 		rm $(obj)u-boot-ubl.bin
 		rm $(obj)spl/u-boot-spl-pad.bin
 
-$(obj)u-boot.ais:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
-		$(obj)tools/mkimage -s -n /dev/null -T aisimage \
+$(obj)u-boot.ais:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
+		$(obj)tools/mkimage -s -n $(if $(CONFIG_AIS_CONFIG_FILE),$(CONFIG_AIS_CONFIG_FILE),"/dev/null") \
+			-T aisimage \
 			-e $(CONFIG_SPL_TEXT_BASE) \
 			-d $(obj)spl/u-boot-spl.bin \
 			$(obj)spl/u-boot-spl.ais
 		$(OBJCOPY) ${OBJCFLAGS} -I binary \
 			--pad-to=$(CONFIG_SPL_MAX_SIZE) -O binary \
 			$(obj)spl/u-boot-spl.ais $(obj)spl/u-boot-spl-pad.ais
-		cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.bin > \
+		cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.img > \
 			$(obj)u-boot.ais
-		rm $(obj)spl/u-boot-spl{,-pad}.ais
+
+# Specify the target for use in elftosb call
+ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
 
 $(obj)u-boot.sb:       $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
-		elftosb -zdf imx28 -c $(TOPDIR)/board/$(BOARDDIR)/u-boot.bd \
+		elftosb -zdf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
 			-o $(obj)u-boot.sb
 
 # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
@@ -468,6 +514,21 @@ $(obj)u-boot.spr:	$(obj)u-boot.img $(obj)spl/u-boot-spl.bin
 			conv=notrunc 2>/dev/null
 		cat $(obj)spl/u-boot-spl-pad.img $(obj)u-boot.img > $@
 
+ifeq ($(SOC),tegra20)
+ifeq ($(CONFIG_OF_SEPARATE),y)
+nodtb=dtb
+dtbfile=$(obj)u-boot.dtb
+else
+nodtb=nodtb
+dtbfile=
+endif
+
+$(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtbfile)
+		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
+		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(dtbfile) > $@
+		rm $(obj)spl/u-boot-spl-pad.bin
+endif
+
 ifeq ($(CONFIG_SANDBOX),y)
 GEN_UBOOT = \
 		cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \
@@ -475,9 +536,10 @@ GEN_UBOOT = \
 			$(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot
 else
 GEN_UBOOT = \
-		UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
-		sed  -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
-		cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $$UNDEF_SYM $(__OBJS) \
+		UNDEF_LST=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
+		sed  -n -e 's/.*\($(SYM_PREFIX)_u_boot_list_.*\)/-u\1/p'|sort|uniq`;\
+		cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
+			$$UNDEF_LST $(__OBJS) \
 			--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
 			-Map u-boot.map -o u-boot
 endif
@@ -486,7 +548,7 @@ $(obj)u-boot:	depend \
 		$(SUBDIR_TOOLS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
 		$(GEN_UBOOT)
 ifeq ($(CONFIG_KALLSYMS),y)
-		smap=`$(call SYSTEM_MAP,u-boot) | \
+		smap=`$(call SYSTEM_MAP,$(obj)u-boot) | \
 			awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
 		$(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \
 			-c common/system_map.c -o $(obj)common/system_map.o
@@ -510,8 +572,12 @@ $(SUBDIR_EXAMPLES): $(obj)u-boot
 $(LDSCRIPT):	depend
 		$(MAKE) -C $(dir $@) $(notdir $@)
 
-$(obj)u-boot.lds: $(LDSCRIPT)
-		$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates u-boot.lst,
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(obj)include/u-boot.lst, $(LIBBOARD) $(LIBS)))
+$(obj)u-boot.lds: $(LDSCRIPT) $(obj)include/u-boot.lst
+		$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@
 
 nand_spl:	$(TIMESTAMP_FILE) $(VERSION_FILE) depend
 		$(MAKE) -C nand_spl/board/$(BOARDDIR) all
@@ -519,12 +585,6 @@ nand_spl:	$(TIMESTAMP_FILE) $(VERSION_FILE) depend
 $(obj)u-boot-nand.bin:	nand_spl $(obj)u-boot.bin
 		cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
 
-onenand_ipl:	$(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
-		$(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
-
-$(obj)u-boot-onenand.bin:	onenand_ipl $(obj)u-boot.bin
-		cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
-
 $(obj)spl/u-boot-spl.bin:	$(SUBDIR_TOOLS) depend
 		$(MAKE) -C spl all
 
@@ -663,6 +723,9 @@ easylogo env gdb:
 	$(MAKE) -C tools/$@ all MTD_VERSION=${MTD_VERSION}
 gdbtools: gdb
 
+xmldocs pdfdocs psdocs htmldocs mandocs: tools/kernel-doc/docproc
+	$(MAKE) U_BOOT_VERSION=$(U_BOOT_VERSION) -C doc/DocBook/ $@
+
 tools-all: easylogo env gdb $(VERSION_FILE) $(TIMESTAMP_FILE)
 	$(MAKE) -C tools HOST_TOOLS_ALL=y
 
@@ -693,20 +756,6 @@ $(obj).boards.depend:	boards.cfg
 lcname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
 ucname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
 
-#========================================================================
-# ARM
-#========================================================================
-
-SX1_stdout_serial_config \
-SX1_config:		unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _stdout_serial_, $@)" ] ; then \
-		echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
-	else \
-		echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
-	fi;
-	@$(MKCONFIG) -n $@ SX1 arm arm925t sx1
-
 #########################################################################
 ## ARM1176 Systems
 #########################################################################
@@ -746,11 +795,14 @@ clean:
 	       $(obj)tools/gen_eth_addr    $(obj)tools/img2srec		  \
 	       $(obj)tools/mk{env,}image   $(obj)tools/mpc86x_clk	  \
 	       $(obj)tools/mk{smdk5250,}spl				  \
-	       $(obj)tools/ncb		   $(obj)tools/ubsha1
+	       $(obj)tools/mxsboot					  \
+	       $(obj)tools/ncb		   $(obj)tools/ubsha1		  \
+	       $(obj)tools/kernel-doc/docproc
 	@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image}	  \
 	       $(obj)board/matrix_vision/*/bootscript.img		  \
 	       $(obj)board/voiceblue/eeprom 				  \
 	       $(obj)u-boot.lds						  \
+	       $(obj)include/u-boot.lst			  		  \
 	       $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]	  \
 	       $(obj)arch/blackfin/cpu/init.{lds,elf}
 	@rm -f $(obj)include/bmp_logo.h
@@ -758,13 +810,8 @@ clean:
 	@rm -f $(obj)lib/asm-offsets.s
 	@rm -f $(obj)include/generated/asm-offsets.h
 	@rm -f $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
-	@rm -f $(obj)nand_spl/{u-boot.lds,u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map,System.map}
-	@rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
-	@rm -f $(ONENAND_BIN)
-	@rm -f $(obj)onenand_ipl/u-boot.lds
-	@rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.lds,u-boot-spl.map}
-	@rm -f $(obj)MLO
 	@rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
+	@$(MAKE) -C doc/DocBook/ cleandocs
 	@find $(OBJTREE) -type f \
 		\( -name 'core' -o -name '*.bak' -o -name '*~' -o -name '*.su' \
 		-o -name '*.o'	-o -name '*.a' -o -name '*.exe'	\) -print \
@@ -782,20 +829,27 @@ clobber:	tidy
 		$(obj)cscope.* $(obj)*.*~
 	@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL-y)
 	@rm -f $(obj)u-boot.kwb
+	@rm -f $(obj)u-boot.pbl
 	@rm -f $(obj)u-boot.imx
 	@rm -f $(obj)u-boot.ubl
 	@rm -f $(obj)u-boot.ais
 	@rm -f $(obj)u-boot.dtb
 	@rm -f $(obj)u-boot.sb
 	@rm -f $(obj)u-boot.spr
+	@rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map}
+	@rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}
+	@rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map}
+	@rm -f $(obj)spl/{u-boot-spl.lds,u-boot.lst}
+	@rm -f $(obj)MLO
+	@rm -f $(obj)SPL
 	@rm -f $(obj)tools/xway-swap-bytes
 	@rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
 	@rm -f $(obj)arch/powerpc/cpu/mpc83xx/ddr-gen?.c
 	@rm -fr $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
 	@rm -fr $(obj)include/generated
 	@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
-	@[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
 	@rm -f $(obj)dts/*.tmp
+	@rm -f $(obj)spl/u-boot-spl{,-pad}.ais
 
 mrproper \
 distclean:	clobber unconfig