X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=Makefile;h=2824a6e159440c9475d76fdfcdf40915dfa03b80;hb=379255f1ee12c2ddbeaba745a36e1803a5b01fcd;hp=0d11ff97971ad673f04779d1831a19cf64a3b4f9;hpb=9450ab2ba8d720bd9f73bccc0af2e2b5a2c2aaf1;p=oweals%2Fu-boot.git

diff --git a/Makefile b/Makefile
index 0d11ff9797..2824a6e159 100644
--- a/Makefile
+++ b/Makefile
@@ -1,9 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0+
 
 VERSION = 2019
-PATCHLEVEL = 01
+PATCHLEVEL = 04
 SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION =
 NAME =
 
 # *DOCUMENTATION*
@@ -291,6 +291,9 @@ DARWIN_MINOR_VERSION	= $(shell sw_vers -productVersion | cut -f 2 -d '.')
 os_x_before	= $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
 	$(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
 
+os_x_after = $(shell if [ $(DARWIN_MAJOR_VERSION) -ge $(1) -a \
+	$(DARWIN_MINOR_VERSION) -ge $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)	
+
 # Snow Leopards build environment has no longer restrictions as described above
 HOSTCC       = $(call os_x_before, 10, 5, "cc", "gcc")
 HOSTCFLAGS  += $(call os_x_before, 10, 4, "-traditional-cpp")
@@ -300,6 +303,10 @@ HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
 # in some host tools which is a problem then ... so disable ASLR for these
 # tools
 HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
+
+# macOS Mojave (10.14.X) 
+# Undefined symbols for architecture x86_64: "_PyArg_ParseTuple"
+HOSTLDFLAGS += $(call os_x_after, 10, 14, "-lpython -dynamclib", "")
 endif
 
 # Decide whether to build built-in, modular, or both.
@@ -534,7 +541,7 @@ include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
 	@# Otherwise, 'make silentoldconfig' would be invoked twice.
 	$(Q)touch include/config/auto.conf
 
-u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg: include/config.h FORCE
+u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg:
 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
 
 -include include/autoconf.mk
@@ -695,7 +702,6 @@ libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
 libs-y += drivers/mtd/spi/
 libs-y += drivers/net/
 libs-y += drivers/net/phy/
-libs-y += drivers/pci/
 libs-y += drivers/power/ \
 	drivers/power/domain/ \
 	drivers/power/fuel_gauge/ \
@@ -713,8 +719,8 @@ libs-y += drivers/usb/dwc3/
 libs-y += drivers/usb/common/
 libs-y += drivers/usb/emul/
 libs-y += drivers/usb/eth/
-libs-y += drivers/usb/gadget/
-libs-y += drivers/usb/gadget/udc/
+libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
+libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
 libs-y += drivers/usb/host/
 libs-y += drivers/usb/musb/
 libs-y += drivers/usb/musb-new/
@@ -725,8 +731,7 @@ libs-y += common/
 libs-y += env/
 libs-$(CONFIG_API) += api/
 libs-$(CONFIG_HAS_POST) += post/
-libs-y += test/
-libs-y += test/dm/
+libs-$(CONFIG_UNIT_TEST) += test/ test/dm/
 libs-$(CONFIG_UT_ENV) += test/env/
 libs-$(CONFIG_UT_OVERLAY) += test/overlay/
 
@@ -895,7 +900,7 @@ cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
 	>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
 
 quiet_cmd_mkfitimage = MKIMAGE $@
-cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E $@ \
+cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@\
 	>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
 
 quiet_cmd_cat = CAT     $@
@@ -912,41 +917,103 @@ quiet_cmd_cfgcheck = CFGCHK  $2
 cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
 		$(srctree)/scripts/config_whitelist.txt $(srctree)
 
-all:		$(ALL-y) cfg
+all:		$(ALL-y)
 ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
-	@echo "===================== WARNING ======================"
-	@echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
-	@echo "(possibly in a subsequent patch in your series)"
-	@echo "before sending patches to the mailing list."
-	@echo "===================================================="
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
+	@echo >&2 "(possibly in a subsequent patch in your series)"
+	@echo >&2 "before sending patches to the mailing list."
+	@echo >&2 "===================================================="
 endif
 ifeq ($(CONFIG_MMC),y)
 ifneq ($(CONFIG_DM_MMC)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
-	@echo "===================== WARNING ======================"
-	@echo "This board does not use CONFIG_DM_MMC. Please update"
-	@echo "the board to use CONFIG_DM_MMC before the v2019.04 release."
-	@echo "Failure to update by the deadline may result in board removal."
-	@echo "See doc/driver-model/MIGRATION.txt for more info."
-	@echo "===================================================="
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_MMC. Please update"
+	@echo >&2 "the board to use CONFIG_DM_MMC before the v2019.04 release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
 endif
 endif
 ifeq ($(CONFIG_USB),y)
 ifneq ($(CONFIG_DM_USB)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
-	@echo "===================== WARNING ======================"
-	@echo "This board does not use CONFIG_DM_USB. Please update"
-	@echo "the board to use CONFIG_DM_USB before the v2019.07 release."
-	@echo "Failure to update by the deadline may result in board removal."
-	@echo "See doc/driver-model/MIGRATION.txt for more info."
-	@echo "===================================================="
-endif
-endif
-ifeq ($(CONFIG_LIBATA)$(CONFIG_DM_SCSI)$(CONFIG_MVSATA_IDE),y)
-	@echo "===================== WARNING ======================"
-	@echo "This board does not use CONFIG_DM_SCSI. Please update"
-	@echo "the storage controller to use CONFIG_DM_SCSI before the v2019.07 release."
-	@echo "Failure to update by the deadline may result in board removal."
-	@echo "See doc/driver-model/MIGRATION.txt for more info."
-	@echo "===================================================="
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_USB. Please update"
+	@echo >&2 "the board to use CONFIG_DM_USB before the v2019.07 release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_MVSATA_IDE),y)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does use CONFIG_MVSATA_IDE which is not"
+	@echo >&2 "ported to driver-model (DM) yet. Please update the storage"
+	@echo >&2 "controller driver to use CONFIG_AHCI before the v2019.07"
+	@echo >&2 "release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+ifeq ($(CONFIG_LIBATA),y)
+ifneq ($(CONFIG_AHCI),y)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does use CONFIG_LIBATA but has CONFIG_AHCI not"
+	@echo >&2 "enabled. Please update the storage controller driver to use"
+	@echo >&2 "CONFIG_AHCI before the v2019.07 release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_PCI),y)
+ifneq ($(CONFIG_DM_PCI),y)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_PCI Please update"
+	@echo >&2 "the board to use CONFIG_DM_PCI before the v2019.07 release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+endif
+ifneq ($(CONFIG_LCD)$(CONFIG_VIDEO),)
+ifneq ($(CONFIG_DM_VIDEO),y)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_VIDEO Please update"
+	@echo >&2 "the board to use CONFIG_DM_VIDEO before the v2019.07 release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_OF_EMBED),y)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
+	@echo >&2 "be used for debugging purposes. Please use"
+	@echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
+	@echo >&2 "See doc/README.fdt-control for more info."
+	@echo >&2 "===================================================="
+endif
+ifeq ($(CONFIG_SPI),y)
+ifneq ($(CONFIG_DM_SPI)$(CONFIG_OF_CONTROL),yy)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_SPI. Please update"
+	@echo >&2 "the board before v2019.04 for no dm conversion"
+	@echo >&2 "and v2019.07 for partially dm converted drivers."
+	@echo >&2 "Failure to update can lead to driver/board removal"
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_SPI_FLASH),y)
+ifneq ($(CONFIG_DM_SPI_FLASH)$(CONFIG_OF_CONTROL),yy)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_SPI_FLASH. Please update"
+	@echo >&2 "the board to use CONFIG_SPI_FLASH before the v2019.07 release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
 endif
 	@# Check that this build does not use CONFIG options that we do not
 	@# know about unless they are in Kconfig. All the existing CONFIG
@@ -964,6 +1031,20 @@ quiet_cmd_copy = COPY    $@
 
 ifeq ($(CONFIG_MULTI_DTB_FIT),y)
 
+ifeq ($(CONFIG_MULTI_DTB_FIT_LZO),y)
+FINAL_DTB_CONTAINER = fit-dtb.blob.lzo
+else ifeq ($(CONFIG_MULTI_DTB_FIT_GZIP),y)
+FINAL_DTB_CONTAINER = fit-dtb.blob.gz
+else
+FINAL_DTB_CONTAINER = fit-dtb.blob
+endif
+
+fit-dtb.blob.gz: fit-dtb.blob
+	@gzip -kf9 $< > $@
+
+fit-dtb.blob.lzo: fit-dtb.blob
+	@lzop -f9 $< > $@
+
 fit-dtb.blob: dts/dt.dtb FORCE
 	$(call if_changed,mkimage)
 
@@ -971,7 +1052,7 @@ MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
 	-a 0 -e 0 -E \
 	$(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
 
-u-boot-fit-dtb.bin: u-boot-nodtb.bin fit-dtb.blob
+u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER)
 	$(call if_changed,cat)
 
 u-boot.bin: u-boot-fit-dtb.bin FORCE
@@ -1106,6 +1187,9 @@ U_BOOT_ITS = $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
 else
 ifneq ($(CONFIG_SPL_FIT_GENERATOR),"")
 U_BOOT_ITS := u-boot.its
+ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-imx/mkimage_fit_atf.sh")
+U_BOOT_ITS_DEPS += u-boot-nodtb.bin
+endif
 ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
 U_BOOT_ITS_DEPS += u-boot
 endif
@@ -1146,6 +1230,13 @@ MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
 u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
 		$(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE
 	$(call if_changed,mkimage)
+	$(BOARD_SIZE_CHECK)
+
+ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
+MKIMAGEFLAGS_u-boot.itb =
+else
+MKIMAGEFLAGS_u-boot.itb = -E
+endif
 
 u-boot.itb: u-boot-nodtb.bin dts/dt.dtb $(U_BOOT_ITS) FORCE
 	$(call if_changed,mkfitimage)
@@ -1166,9 +1257,11 @@ else
 SPL_PAYLOAD := u-boot.bin
 endif
 
+SPL_IMAGE := $(CONFIG_SPL_IMAGE:"%"=%)
+
 OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
 				   --pad-to=$(CONFIG_SPL_PAD_TO)
-u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
+u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
 	$(call if_changed,pad_cat)
 
 ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
@@ -1201,6 +1294,11 @@ tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
 SPL: spl/u-boot-spl.bin FORCE
 	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
 
+ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
+flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
+	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+endif
+
 u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
 	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
 
@@ -1498,7 +1596,7 @@ ifneq ($(KBUILD_SRC),)
 endif
 
 # prepare2 creates a makefile if using a separate output directory
-prepare2: prepare3 outputmakefile
+prepare2: prepare3 outputmakefile cfg
 
 prepare1: prepare2 $(version_h) $(timestamp_h) \
                    include/config/auto.conf
@@ -1682,7 +1780,8 @@ CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
 MRPROPER_DIRS  += include/config include/generated spl tpl \
 		  .tmp_objdiff
 MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
-		  ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
+		  ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
+		  drivers/video/fonts/*.S
 
 # clean - Delete most, but leave enough to build external modules
 #
@@ -1737,7 +1836,7 @@ distclean: mrproper
 		-o -name '.*.rej' -o -name '*%' -o -name 'core' \
 		-o -name '*.pyc' \) \
 		-type f -print | xargs rm -f
-	@rm -f boards.cfg
+	@rm -f boards.cfg CHANGELOG
 
 backup:
 	F=`basename $(srctree)` ; cd .. ; \