X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=Makefile;h=10a3e06f51400d09db712caee99f2279cb9c92af;hb=4fb25a3db3b3839094aa9ab748efd7a95924690b;hp=f4b5bcd7188b23d4b1c8745420d23b79bcffe221;hpb=d6f98e76a0a7db415e39c94bf3d2ad539ca9c60d;p=oweals%2Fu-boot.git

diff --git a/Makefile b/Makefile
index f4b5bcd718..10a3e06f51 100644
--- a/Makefile
+++ b/Makefile
@@ -23,7 +23,7 @@
 
 VERSION = 1
 PATCHLEVEL = 3
-SUBLEVEL = 2
+SUBLEVEL = 3
 EXTRAVERSION =
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 VERSION_FILE = $(obj)include/version_autogenerated.h
@@ -123,6 +123,10 @@ unexport CDPATH
 
 #########################################################################
 
+ifeq ($(ARCH),powerpc)
+ARCH = ppc
+endif
+
 ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
 
 # load ARCH, BOARD, and CPU configuration
@@ -197,7 +201,6 @@ OBJS := $(addprefix $(obj),$(OBJS))
 LIBS  = lib_generic/libgeneric.a
 LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
 	"board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
-LIBS += board/$(BOARDDIR)/lib$(BOARD).a
 LIBS += cpu/$(CPU)/lib$(CPU).a
 ifdef SOC
 LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
@@ -217,10 +220,12 @@ LIBS += drivers/hwmon/libhwmon.a
 LIBS += drivers/i2c/libi2c.a
 LIBS += drivers/input/libinput.a
 LIBS += drivers/misc/libmisc.a
+LIBS += drivers/mmc/libmmc.a
 LIBS += drivers/mtd/libmtd.a
 LIBS += drivers/mtd/nand/libnand.a
 LIBS += drivers/mtd/nand_legacy/libnand_legacy.a
 LIBS += drivers/mtd/onenand/libonenand.a
+LIBS += drivers/mtd/spi/libspi_flash.a
 LIBS += drivers/net/libnet.a
 LIBS += drivers/net/sk98lin/libsk98lin.a
 LIBS += drivers/pci/libpci.a
@@ -236,22 +241,17 @@ LIBS += drivers/rtc/librtc.a
 LIBS += drivers/serial/libserial.a
 LIBS += drivers/usb/libusb.a
 LIBS += drivers/video/libvideo.a
-LIBS += post/libpost.a post/drivers/libpostdrivers.a
-LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \
-	"post/lib_$(ARCH)/libpost$(ARCH).a"; fi)
-LIBS += $(shell if [ -d post/lib_$(ARCH)/fpu ]; then echo \
-	"post/lib_$(ARCH)/fpu/libpost$(ARCH)fpu.a"; fi)
-LIBS += $(shell if [ -d post/cpu/$(CPU) ]; then echo \
-	"post/cpu/$(CPU)/libpost$(CPU).a"; fi)
-LIBS += $(shell if [ -d post/board/$(BOARDDIR) ]; then echo \
-	"post/board/$(BOARDDIR)/libpost$(BOARD).a"; fi)
 LIBS += common/libcommon.a
 LIBS += libfdt/libfdt.a
 LIBS += api/libapi.a
+LIBS += post/libpost.a
 
 LIBS := $(addprefix $(obj),$(LIBS))
 .PHONY : $(LIBS) $(VERSION_FILE)
 
+LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
+LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
+
 # Add GCC lib
 PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
 
@@ -274,7 +274,7 @@ U_BOOT_ONENAND = $(obj)u-boot-onenand.bin
 endif
 
 __OBJS := $(subst $(obj),,$(OBJS))
-__LIBS := $(subst $(obj),,$(LIBS))
+__LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
 
 #########################################################################
 #########################################################################
@@ -317,8 +317,9 @@ $(obj)u-boot.sha1:	$(obj)u-boot.bin
 $(obj)u-boot.dis:	$(obj)u-boot
 		$(OBJDUMP) -d $< > $@
 
-$(obj)u-boot:		depend $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
-		UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed  -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
+$(obj)u-boot:		depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT)
+		UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
+		sed  -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
 		cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
 			--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
 			-Map u-boot.map -o u-boot
@@ -329,6 +330,9 @@ $(OBJS):	depend $(obj)include/autoconf.mk
 $(LIBS):	depend $(obj)include/autoconf.mk
 		$(MAKE) -C $(dir $(subst $(obj),,$@))
 
+$(LIBBOARD):	depend $(LIBS) $(obj)include/autoconf.mk
+		$(MAKE) -C $(dir $(subst $(obj),,$@))
+
 $(SUBDIRS):	depend $(obj)include/autoconf.mk
 		$(MAKE) -C $@ all
 
@@ -350,11 +354,9 @@ $(U_BOOT_ONENAND):	$(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
 		cat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-flexonenand.bin
 
 $(VERSION_FILE):
-		@( echo -n "#define U_BOOT_VERSION \"U-Boot " ; \
-		echo -n "$(U_BOOT_VERSION)" ; \
-		echo -n $(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion \
-			 $(TOPDIR)) ; \
-		echo "\"" ) > $@.tmp
+		@( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
+		 '$(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion $(TOPDIR))' \
+		 ) > $@.tmp
 		@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
 
 gdbtools:
@@ -386,10 +388,12 @@ TAG_SUBDIRS += drivers/hwmon
 TAG_SUBDIRS += drivers/i2c
 TAG_SUBDIRS += drivers/input
 TAG_SUBDIRS += drivers/misc
+TAG_SUBDIRS += drivers/mmc
 TAG_SUBDIRS += drivers/mtd
 TAG_SUBDIRS += drivers/mtd/nand
 TAG_SUBDIRS += drivers/mtd/nand_legacy
 TAG_SUBDIRS += drivers/mtd/onenand
+TAG_SUBDIRS += drivers/mtd/spi
 TAG_SUBDIRS += drivers/net
 TAG_SUBDIRS += drivers/net/sk98lin
 TAG_SUBDIRS += drivers/pci
@@ -424,13 +428,19 @@ $(obj)System.map:	$(obj)u-boot
 # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
 # the dep file is only include in this top level makefile to determine when
 # to regenerate the autoconf.mk file.
-$(obj)include/autoconf.mk: $(obj)include/config.h $(VERSION_FILE)
-	@$(XECHO) Generating include/autoconf.mk ; \
+$(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
+	@$(XECHO) Generating $@ ; \
 	set -e ; \
 	: Generate the dependancies ; \
-	$(CC) -M $(HOST_CFLAGS) $(CPPFLAGS) -MQ $@ include/common.h > $@.dep ; \
+	$(CC) -x c -DDO_DEPS_ONLY -M $(HOST_CFLAGS) $(CPPFLAGS) \
+		-MQ $(obj)include/autoconf.mk include/common.h > $@
+
+$(obj)include/autoconf.mk: $(obj)include/config.h
+	@$(XECHO) Generating $@ ; \
+	set -e ; \
 	: Extract the config macros ; \
-	$(CPP) $(CFLAGS) -dM include/common.h | sed -n -f tools/scripts/define2mk.sed > $@
+	$(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
+		sed -n -f tools/scripts/define2mk.sed > $@
 
 sinclude $(obj)include/autoconf.mk.dep
 
@@ -478,7 +488,7 @@ PATI_config:		unconfig
 #########################################################################
 
 aev_config: unconfig
-	@$(MKCONFIG) -a aev ppc mpc5xxx tqm5200
+	@$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc
 
 BC3450_config:	unconfig
 	@$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
@@ -632,13 +642,13 @@ PM520_ROMBOOT_DDR_config:	unconfig
 	@$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
 
 smmaco4_config: unconfig
-	@$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200
+	@$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc
 
 cm5200_config:	unconfig
 	@$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
 
 spieval_config:	unconfig
-	@$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200
+	@$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc
 
 TB5200_B_config \
 TB5200_config:	unconfig
@@ -647,7 +657,7 @@ TB5200_config:	unconfig
 		{ echo "#define CONFIG_TQM5200_B"	>>$(obj)include/config.h ; \
 		  $(XECHO) "... with MPC5200B processor" ; \
 		}
-	@$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200
+	@$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc
 
 MINI5200_config	\
 EVAL5200_config	\
@@ -696,7 +706,7 @@ TQM5200_B_HIGHBOOT_config \
 TQM5200_config	\
 TQM5200_STK100_config:	unconfig
 	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/tqm5200
+	@mkdir -p $(obj)board/tqc/tqm5200
 	@[ -z "$(findstring cam5200,$@)" ] || \
 		{ echo "#define CONFIG_CAM5200"	>>$(obj)include/config.h ; \
 		  echo "#define CONFIG_TQM5200S"	>>$(obj)include/config.h ; \
@@ -729,7 +739,7 @@ TQM5200_STK100_config:	unconfig
 	@[ -z "$(findstring HIGHBOOT,$@)" ] || \
 		{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
 		}
-	@$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200
+	@$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc
 uc101_config:		unconfig
 	@$(MKCONFIG) uc101 ppc mpc5xxx uc101
 motionpro_config:	unconfig
@@ -740,12 +750,11 @@ motionpro_config:	unconfig
 ## MPC512x Systems
 #########################################################################
 ads5121_config \
-ads5121_PCI_config \
-	:		 unconfig
+ads5121_rev2_config	\
+	: unconfig
 	@mkdir -p $(obj)include
-	@if [ "$(findstring _PCI_,$@)" ] ; then \
-		echo "#define CONFIG_PCI"  >>$(obj)include/config.h ; \
-		$(XECHO) "... with PCI enabled" ; \
+	@if [ "$(findstring rev2,$@)" ] ; then \
+		echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
 	fi
 	@$(MKCONFIG) -a ads5121 ppc mpc512x ads5121
 
@@ -822,7 +831,7 @@ hermes_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes
 
 HMI10_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx
+	@$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
 
 IAD210_config: unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens
@@ -1051,7 +1060,7 @@ RRvision_LCD_config:	unconfig
 	@$(MKCONFIG) -a RRvision ppc mpc8xx RRvision
 
 SM850_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx
+	@$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
 
 spc1920_config:		unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920
@@ -1101,13 +1110,13 @@ virtlab2_config:	unconfig
 		  echo "#define CONFIG_NEC_NL6448BC20"	>>$(obj)include/config.h ; \
 		  $(XECHO) "... with LCD display" ; \
 		}
-	@$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx
+	@$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc
 
 TTTech_config:	unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_LCD" >$(obj)include/config.h
 	@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
-	@$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx
+	@$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
 
 uc100_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100
@@ -1122,7 +1131,7 @@ wtk_config:	unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_LCD" >$(obj)include/config.h
 	@echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
-	@$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx
+	@$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
 
 #########################################################################
 ## PPC4xx Systems
@@ -1183,10 +1192,13 @@ glacier_config:	unconfig
 		tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
 	@$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
 
-canyonlands_nand_config:	unconfig
+canyonlands_nand_config \
+glacier_nand_config:	unconfig
 	@mkdir -p $(obj)include $(obj)board/amcc/canyonlands
 	@mkdir -p $(obj)nand_spl/board/amcc/canyonlands
 	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
+	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
+		tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
 	@$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
 	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
 	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@@ -1382,6 +1394,9 @@ PPChameleonEVB_HI_33_config:	unconfig
 		}
 	@$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
 
+quad100hd_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd
+
 sbc405_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
 
@@ -1403,6 +1418,9 @@ rainier_nand_config: unconfig
 	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
 	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
 
+redwood_config: unconfig
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc
+
 sc3_config:unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
 
@@ -1502,6 +1520,18 @@ HIDDEN_DRAGON_config: unconfig
 kvme080_config: unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin
 
+# HDLAN is broken ATM. Should be fixed as soon as hardware is available and as
+# time permits.
+#linkstation_HDLAN_config \
+# Remove this line when HDLAN is fixed
+linkstation_HGLAN_config: unconfig
+	@mkdir -p $(obj)include
+	@case $@ in \
+		*HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \
+		*HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \
+	esac
+	@$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation
+
 MOUSSE_config: unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc824x mousse
 
@@ -1758,10 +1788,10 @@ TQM8265_AA_config:  unconfig
 		echo "#undef CONFIG_BUSMODE_60x"  >>$(obj)include/config.h ; \
 		$(XECHO) "... without 60x Bus Mode" ; \
 	fi
-	@$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260
+	@$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc
 
 TQM8272_config: unconfig
-	@$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272
+	@$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc
 
 VoVPN-GW_66MHz_config	\
 VoVPN-GW_100MHz_config:		unconfig
@@ -2081,11 +2111,14 @@ MPC837XEMDS_HOST_config:	unconfig
 MPC837XERDB_config:	unconfig
 	@$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale
 
+MVBLM7_config: unconfig
+	@$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7
+
 sbc8349_config:		unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349
 
 TQM834x_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x
+	@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
 
 
 #########################################################################
@@ -2187,6 +2220,9 @@ sbc8560_66_config:	unconfig
 	fi
 	@$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560
 
+socrates_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates
+
 stxgp3_config:		unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3
 
@@ -2201,6 +2237,7 @@ stxssa_4M_config:	unconfig
 
 TQM8540_config		\
 TQM8541_config		\
+TQM8548_config		\
 TQM8555_config		\
 TQM8560_config:		unconfig
 	@mkdir -p $(obj)include
@@ -2209,9 +2246,8 @@ TQM8560_config:		unconfig
 	echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
 	echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \
 	echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
-	echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h; \
-	echo "#define CFG_BOOTFILE_PATH \"/tftpboot/tqm$${CTYPE}/uImage\"">>$(obj)include/config.h
-	@$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx
+	echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h;
+	@$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
 
 #########################################################################
 ## MPC86xx Systems
@@ -2304,20 +2340,21 @@ shannon_config	:	unconfig
 ## ARM92xT Systems
 #########################################################################
 
-xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
-
-xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
-
-xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
-
-at91cap9adk_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91sam9
+#########################################################################
+## Atmel AT91RM9200 Systems
+#########################################################################
 
 at91rm9200dk_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
 
-at91sam9260ek_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91sam9
+at91sam9261ek_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91sam9
+
+at91sam9263ek_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91sam9
+
+at91sam9rlek_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91sam9
 
 cmc_pu2_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
@@ -2325,12 +2362,25 @@ cmc_pu2_config	:	unconfig
 csb637_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
 
+kb9202_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
+
 mp2usb_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
 
 m501sk_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200
 
+#########################################################################
+## Atmel ARM926EJ-S Systems
+#########################################################################
+
+at91cap9adk_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91sam9
+
+at91sam9260ek_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91sam9
+
 ########################################################################
 ## ARM Integrator boards - see doc/README-integrator for more info.
 integratorap_config	\
@@ -2357,9 +2407,6 @@ cp922_XA10_config	\
 cp1026_config: unconfig
 	@board/integratorcp/split_by_variant.sh $@
 
-kb9202_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
-
 lpd7a400_config \
 lpd7a404_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
@@ -2385,9 +2432,14 @@ davinci_dvevm_config :	unconfig
 davinci_schmoogie_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
 
+davinci_sffsdr_config :	unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci
+
 davinci_sonata_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
 
+xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
+
 omap1610inn_config \
 omap1610inn_cs0boot_config \
 omap1610inn_cs3boot_config \
@@ -2409,6 +2461,8 @@ omap1610h2_cs_autoboot_config:	unconfig
 	fi;
 	@$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
 
+xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
+
 omap730p2_config \
 omap730p2_cs0boot_config \
 omap730p2_cs3boot_config :	unconfig
@@ -2438,6 +2492,8 @@ SX1_config :		unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm925t sx1
 
 # TRAB default configuration:	8 MB Flash, 32 MB RAM
+xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
+
 trab_config \
 trab_bigram_config \
 trab_bigflash_config \
@@ -2598,14 +2654,23 @@ zylonite_config :
 ## ARM1136 Systems
 #########################################################################
 omap2420h4_config	: unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4
+	@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
 
 apollon_config		: unconfig
 	@mkdir -p $(obj)include
 	@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
-	@$(MKCONFIG) $(@:_config=) arm arm1136 apollon
+	@$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
 	@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
 
+imx31_litekit_config	: unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31
+
+imx31_phycore_config	: unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31
+
+mx31ads_config		: unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads NULL mx31
+
 #========================================================================
 # i386
 #========================================================================
@@ -2826,7 +2891,7 @@ $(BFIN_BOARDS):
 # AVR32
 #========================================================================
 #########################################################################
-## AT32AP7xxx
+## AT32AP70xx
 #########################################################################
 
 atstk1002_config	:	unconfig
@@ -2838,6 +2903,9 @@ atstk1003_config	:	unconfig
 atstk1004_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
 
+atstk1006_config	:	unconfig
+	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
 atngw100_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
 
@@ -2849,40 +2917,48 @@ atngw100_config	:	unconfig
 ## sh3 (Renesas SuperH)
 #########################################################################
 mpr2_config: unconfig
-	@ >include/config.h
-	@echo "#define CONFIG_MPR2 1" >> include/config.h
+	@mkdir -p $(obj)include
+	@echo "#define CONFIG_MPR2 1" > $(obj)include/config.h
 	@$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2
 
 ms7720se_config: unconfig
-	@echo "#define CONFIG_MS7720SE 1" > include/config.h
+	@mkdir -p $(obj)include
+	@echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h
 	@$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se
 
 #########################################################################
 ## sh4 (Renesas SuperH)
 #########################################################################
 ms7750se_config: unconfig
+	@mkdir -p $(obj)include
 	@echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h
 	@$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se
 
 ms7722se_config :	unconfig
+	@mkdir -p $(obj)include
 	@echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h
 	@$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se
 
 MigoR_config :       unconfig
-	@ >include/config.h
-	@echo "#define CONFIG_MIGO_R 1" >> include/config.h
+	@mkdir -p $(obj)include
+	@echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
 	@./mkconfig -a $(@:_config=) sh sh4 MigoR
 
 r7780mp_config: unconfig
-	@ >include/config.h
-	@echo "#define CONFIG_R7780MP 1" >> include/config.h
+	@mkdir -p $(obj)include
+	@echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
 	@./mkconfig -a $(@:_config=) sh sh4 r7780mp
 
 r2dplus_config  :   unconfig
-	@ >include/config.h
-	@echo "#define CONFIG_R2DPLUS 1" >> include/config.h
+	@mkdir -p $(obj)include
+	@echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
 	@./mkconfig -a $(@:_config=) sh sh4 r2dplus
 
+sh7763rdp_config  :   unconfig
+	@mkdir -p $(obj)include
+	@echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
+	@./mkconfig -a $(@:_config=) sh sh4 sh7763rdp
+
 #========================================================================
 # SPARC
 #========================================================================
@@ -2938,7 +3014,8 @@ clean:
 	       $(obj)board/{integratorap,integratorcp}/u-boot.lds	  \
 	       $(obj)board/{bf533-ezkit,bf533-stamp,bf537-stamp,bf561-ezkit}/u-boot.lds \
 	       $(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
-	@rm -f $(obj)include/bmp_logo.h $(obj)nand_spl/{u-boot-spl,u-boot-spl.map}
+	@rm -f $(obj)include/bmp_logo.h
+	@rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map}
 	@rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map}
 	@rm -f $(obj)api_examples/demo $(VERSION_FILE)
 	@find $(OBJTREE) -type f \
@@ -2955,7 +3032,7 @@ clobber:	clean
 		$(obj)cscope.* $(obj)*.*~
 	@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
 	@rm -f $(obj)tools/{crc32.c,environment.c,env/crc32.c,md5.c,sha1.c,inca-swap-bytes}
-	@rm -f $(obj)tools/{image.c,fdt.c,fdt_ro.c,fdt_rw.c,fdt_strerror.c}
+	@rm -f $(obj)tools/{image.c,fdt.c,fdt_ro.c,fdt_rw.c,fdt_strerror.c,zlib.h}
 	@rm -f $(obj)tools/{fdt_wip.c,libfdt_internal.h}
 	@rm -f $(obj)cpu/mpc824x/bedbug_603e.c
 	@rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm