X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=Kconfig;h=d8e1aa4eeded267eddf1e81265bf34c8dabae45e;hb=50b4b80f597b9f59b98adbdbad691b1027bd501a;hp=42672a92df4dd03cf416e92968bb43a3a2e6d474;hpb=9450ab2ba8d720bd9f73bccc0af2e2b5a2c2aaf1;p=oweals%2Fu-boot.git

diff --git a/Kconfig b/Kconfig
index 42672a92df..d8e1aa4eed 100644
--- a/Kconfig
+++ b/Kconfig
@@ -20,6 +20,13 @@ config BROKEN
 	  This option cannot be enabled. It is used as dependency
 	  for broken and incomplete features.
 
+config DEPRECATED
+	bool
+	help
+	  This option cannot be enabled.  It it used as a dependency for
+	  code that relies on deprecated features that will be removed and
+	  the conversion deadline has passed.
+
 config LOCALVERSION
 	string "Local version - append to U-Boot release"
 	help
@@ -126,6 +133,7 @@ config SYS_BOOT_GET_KBD
 config SYS_MALLOC_F
 	bool "Enable malloc() pool before relocation"
 	default y if DM
+
 	help
 	  Before relocation, memory is very limited on many platforms. Still,
 	  we can provide a small malloc() pool if needed. Driver model in
@@ -136,6 +144,9 @@ config SYS_MALLOC_F_LEN
 	hex "Size of malloc() pool before relocation"
 	depends on SYS_MALLOC_F
 	default 0x1000 if AM33XX
+	default 0x2800 if SANDBOX
+	default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \
+			   ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5)
 	default 0x400
 	help
 	  Before relocation, memory is very limited on many platforms. Still,
@@ -145,14 +156,16 @@ config SYS_MALLOC_F_LEN
 
 config SYS_MALLOC_LEN
 	hex "Define memory for Dynamic allocation"
-	depends on ARCH_ZYNQ || ARCH_VERSAL
+	depends on ARCH_ZYNQ || ARCH_VERSAL || ARCH_STM32MP || ARCH_ROCKCHIP
+	default 0x2000000 if ARCH_ROCKCHIP
 	help
 	  This defines memory to be allocated for Dynamic allocation
 	  TODO: Use for other architectures
 
 config SPL_SYS_MALLOC_F_LEN
 	hex "Size of malloc() pool in SPL before relocation"
-	depends on SYS_MALLOC_F
+	depends on SYS_MALLOC_F && SPL
+	default 0x2800 if RCAR_GEN3
 	default SYS_MALLOC_F_LEN
 	help
 	  Before relocation, memory is very limited on many platforms. Still,
@@ -162,7 +175,7 @@ config SPL_SYS_MALLOC_F_LEN
 
 config TPL_SYS_MALLOC_F_LEN
 	hex "Size of malloc() pool in TPL before relocation"
-	depends on SYS_MALLOC_F
+	depends on SYS_MALLOC_F && TPL
 	default SYS_MALLOC_F_LEN
 	help
 	  Before relocation, memory is very limited on many platforms. Still,
@@ -211,7 +224,7 @@ config PHYS_64BIT
 	help
 	  Say Y here to support 64bit physical memory address.
 	  This can be used not only for 64bit SoCs, but also for
-	  large physical address extention on 32bit SoCs.
+	  large physical address extension on 32bit SoCs.
 
 config BUILD_ROM
 	bool "Build U-Boot as BIOS replacement"
@@ -222,6 +235,50 @@ config BUILD_ROM
 	  which are not shipped in the U-Boot source tree.
 	  Please, see doc/README.x86 for details.
 
+config SPL_IMAGE
+	string "SPL image used in the combined SPL+U-Boot image"
+	default "spl/boot.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
+	default "spl/u-boot-spl.bin"
+	depends on SPL
+	help
+	  Select the SPL build target that shall be generated by the SPL
+	  build process (default spl/u-boot-spl.bin). This image will be
+	  used to generate a combined image with SPL and main U-Boot
+	  proper as one single image.
+
+config BUILD_TARGET
+	string "Build target special images"
+	default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_ARRIA10
+	default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
+	default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
+	default "u-boot-elf.srec" if RCAR_GEN3
+	default "u-boot.itb" if SPL_LOAD_FIT && (ROCKCHIP_RK3399 || ARCH_SUNXI)
+	default "u-boot.kwb" if KIRKWOOD
+	default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
+	help
+	  Some SoCs need special image types (e.g. U-Boot binary
+	  with a special header) as build targets. By defining
+	  CONFIG_BUILD_TARGET in the SoC / board header, this
+	  special image will be automatically built upon calling
+	  make / buildman.
+
+config SYS_CUSTOM_LDSCRIPT
+	bool "Use a custom location for the U-Boot linker script"
+	help
+	  Normally when linking U-Boot we will look in the board directory,
+	  the CPU directory and finally the "cpu" directory of the architecture
+	  for the ile "u-boot.lds" and use that as our linker.  However, in
+	  some cases we need to provide a different linker script.  To do so,
+	  enable this option and then provide the location under
+	  CONFIG_SYS_LDSCRIPT.
+
+config SYS_LDSCRIPT
+	depends on SYS_CUSTOM_LDSCRIPT
+	string "Custom ldscript location"
+	help
+	  Path within the source tree to the linker script to use for the
+	  main U-Boot binary.
+
 endmenu		# General setup
 
 menu "Boot images"
@@ -249,6 +306,16 @@ config FIT
 
 if FIT
 
+config FIT_EXTERNAL_OFFSET
+	hex "FIT external data offset"
+	default 0x0
+	help
+	  This specifies a data offset in fit image.
+	  The offset is from data payload offset to the beginning of
+	  fit image header. When specifies a offset, specific data
+	  could be put in the hole between data payload and fit image
+	  header, such as CSF data on i.MX platform.
+
 config FIT_ENABLE_SHA256_SUPPORT
 	bool "Support SHA256 checksum of FIT image contents"
 	default y
@@ -279,7 +346,7 @@ config FIT_SIGNATURE
 	  check the legacy image format is disabled by default, so that
 	  unsigned images cannot be loaded. If a board needs the legacy image
 	  format support in this case, enable it using
-	  CONFIG_IMAGE_FORMAT_LEGACY.
+	  CONFIG_LEGACY_IMAGE_FORMAT.
 
 config FIT_SIGNATURE_MAX_SIZE
 	hex "Max size of signed FIT structures"
@@ -350,7 +417,7 @@ config SPL_FIT_SIGNATURE
 	select SPL_RSA
 
 config SPL_LOAD_FIT
-	bool "Enable SPL loading U-Boot as a FIT"
+	bool "Enable SPL loading U-Boot as a FIT (basic fitImage features)"
 	select SPL_FIT
 	help
 	  Normally with the SPL framework a legacy image is generated as part
@@ -361,7 +428,7 @@ config SPL_LOAD_FIT
 	  and passing the correct one to U-Boot.
 
 config SPL_LOAD_FIT_FULL
-	bool "Enable SPL loading U-Boot as a FIT"
+	bool "Enable SPL loading U-Boot as a FIT (full fitImage features)"
 	select SPL_FIT
 	help
 	  Normally with the SPL framework a legacy image is generated as part
@@ -397,6 +464,7 @@ config SPL_FIT_GENERATOR
 	string ".its file generator script for U-Boot FIT image"
 	depends on SPL_FIT
 	default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
+	default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
 	help
 	  Specifies a (platform specific) script file to generate the FIT
 	  source file used to build the U-Boot FIT image file. This gets
@@ -407,7 +475,7 @@ endif # SPL
 
 endif # FIT
 
-config IMAGE_FORMAT_LEGACY
+config LEGACY_IMAGE_FORMAT
 	bool "Enable support for the legacy image format"
 	default y if !FIT_SIGNATURE
 	help
@@ -473,7 +541,7 @@ config SYS_TEXT_BASE
 
 
 config SYS_CLK_FREQ
-	depends on ARC || ARCH_SUNXI
+	depends on ARC || ARCH_SUNXI || MPC83xx
 	int "CPU clock frequency"
 	help
 	  TODO: Move CONFIG_SYS_CLK_FREQ for all the architecture