X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=Kconfig;h=d2eb744e7023431bfeb013dc0c5f7d5618dbdaaa;hb=76e4b3bbe01fb09ccecbf01ab9811d18ef98d897;hp=709912e1340129db922ea414a0653f332b397bbb;hpb=0a0f23142ffd39954c84af3554f8026e2b8de848;p=oweals%2Fu-boot.git

diff --git a/Kconfig b/Kconfig
index 709912e134..d2eb744e70 100644
--- a/Kconfig
+++ b/Kconfig
@@ -20,6 +20,13 @@ config BROKEN
 	  This option cannot be enabled. It is used as dependency
 	  for broken and incomplete features.
 
+config DEPRECATED
+	bool
+	help
+	  This option cannot be enabled.  It it used as a dependency for
+	  code that relies on deprecated features that will be removed and
+	  the conversion deadline has passed.
+
 config LOCALVERSION
 	string "Local version - append to U-Boot release"
 	help
@@ -138,6 +145,8 @@ config SYS_MALLOC_F_LEN
 	depends on SYS_MALLOC_F
 	default 0x1000 if AM33XX
 	default 0x2800 if SANDBOX
+	default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \
+			   ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5)
 	default 0x400
 	help
 	  Before relocation, memory is very limited on many platforms. Still,
@@ -173,14 +182,6 @@ config TPL_SYS_MALLOC_F_LEN
 	  particular needs this to operate, so that it can allocate the
 	  initial serial device and any others that are needed.
 
-config SPL_SIZE_LIMIT
-	int "Maximum size of SPL image"
-	depends on SPL
-	default 0
-	help
-	  Specifies the maximum length of the U-Boot SPL image.
-	  If this value is zero, it is ignored.
-
 menuconfig EXPERT
 	bool "Configure standard U-Boot features (expert users)"
 	default y
@@ -249,7 +250,7 @@ config BUILD_TARGET
 	default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
 	default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
 	default "u-boot-elf.srec" if RCAR_GEN3
-	default "u-boot.itb" if SPL_LOAD_FIT && ARCH_SUNXI
+	default "u-boot.itb" if SPL_LOAD_FIT && (ROCKCHIP_RK3399 || ARCH_SUNXI)
 	default "u-boot.kwb" if KIRKWOOD
 	default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
 	help
@@ -259,6 +260,23 @@ config BUILD_TARGET
 	  special image will be automatically built upon calling
 	  make / buildman.
 
+config SYS_CUSTOM_LDSCRIPT
+	bool "Use a custom location for the U-Boot linker script"
+	help
+	  Normally when linking U-Boot we will look in the board directory,
+	  the CPU directory and finally the "cpu" directory of the architecture
+	  for the ile "u-boot.lds" and use that as our linker.  However, in
+	  some cases we need to provide a different linker script.  To do so,
+	  enable this option and then provide the location under
+	  CONFIG_SYS_LDSCRIPT.
+
+config SYS_LDSCRIPT
+	depends on SYS_CUSTOM_LDSCRIPT
+	string "Custom ldscript location"
+	help
+	  Path within the source tree to the linker script to use for the
+	  main U-Boot binary.
+
 endmenu		# General setup
 
 menu "Boot images"
@@ -326,7 +344,7 @@ config FIT_SIGNATURE
 	  check the legacy image format is disabled by default, so that
 	  unsigned images cannot be loaded. If a board needs the legacy image
 	  format support in this case, enable it using
-	  CONFIG_IMAGE_FORMAT_LEGACY.
+	  CONFIG_LEGACY_IMAGE_FORMAT.
 
 config FIT_SIGNATURE_MAX_SIZE
 	hex "Max size of signed FIT structures"
@@ -455,7 +473,7 @@ endif # SPL
 
 endif # FIT
 
-config IMAGE_FORMAT_LEGACY
+config LEGACY_IMAGE_FORMAT
 	bool "Enable support for the legacy image format"
 	default y if !FIT_SIGNATURE
 	help