X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=Kconfig;h=caae4aecbdfb29d012381c6f7d096ac1b4ff6064;hb=cd304e218012de4ac2e3d55e869b2102af4fdcb2;hp=d2eb744e7023431bfeb013dc0c5f7d5618dbdaaa;hpb=c76c93a3d5a921152e27aa7adb3bbcf9ec4015e1;p=oweals%2Fu-boot.git

diff --git a/Kconfig b/Kconfig
index d2eb744e70..caae4aecbd 100644
--- a/Kconfig
+++ b/Kconfig
@@ -88,6 +88,7 @@ config DISTRO_DEFAULTS
 	select CMD_PART if PARTITIONS
 	select CMD_PING if CMD_NET
 	select CMD_PXE if NET
+	select CMD_SYSBOOT
 	select ENV_VARS_UBOOT_CONFIG
 	select HUSH_PARSER
 	select SUPPORT_RAW_INITRD
@@ -156,14 +157,15 @@ config SYS_MALLOC_F_LEN
 
 config SYS_MALLOC_LEN
 	hex "Define memory for Dynamic allocation"
-	depends on ARCH_ZYNQ || ARCH_VERSAL || ARCH_STM32MP
+	depends on ARCH_ZYNQ || ARCH_VERSAL || ARCH_STM32MP || ARCH_ROCKCHIP
+	default 0x2000000 if ARCH_ROCKCHIP
 	help
 	  This defines memory to be allocated for Dynamic allocation
 	  TODO: Use for other architectures
 
 config SPL_SYS_MALLOC_F_LEN
 	hex "Size of malloc() pool in SPL before relocation"
-	depends on SYS_MALLOC_F
+	depends on SYS_MALLOC_F && SPL
 	default 0x2800 if RCAR_GEN3
 	default SYS_MALLOC_F_LEN
 	help
@@ -174,7 +176,7 @@ config SPL_SYS_MALLOC_F_LEN
 
 config TPL_SYS_MALLOC_F_LEN
 	hex "Size of malloc() pool in TPL before relocation"
-	depends on SYS_MALLOC_F
+	depends on SYS_MALLOC_F && TPL
 	default SYS_MALLOC_F_LEN
 	help
 	  Before relocation, memory is very limited on many platforms. Still,
@@ -238,6 +240,7 @@ config SPL_IMAGE
 	string "SPL image used in the combined SPL+U-Boot image"
 	default "spl/boot.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
 	default "spl/u-boot-spl.bin"
+	depends on SPL
 	help
 	  Select the SPL build target that shall be generated by the SPL
 	  build process (default spl/u-boot-spl.bin). This image will be
@@ -250,9 +253,11 @@ config BUILD_TARGET
 	default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
 	default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
 	default "u-boot-elf.srec" if RCAR_GEN3
-	default "u-boot.itb" if SPL_LOAD_FIT && (ROCKCHIP_RK3399 || ARCH_SUNXI)
+	default "u-boot.itb" if SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
+				ARCH_SUNXI || RISCV || ARCH_ZYNQMP)
 	default "u-boot.kwb" if KIRKWOOD
 	default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
+	default "u-boot-with-spl.imx" if ARCH_MX6 && SPL
 	help
 	  Some SoCs need special image types (e.g. U-Boot binary
 	  with a special header) as build targets. By defining
@@ -277,6 +282,20 @@ config SYS_LDSCRIPT
 	  Path within the source tree to the linker script to use for the
 	  main U-Boot binary.
 
+config ERR_PTR_OFFSET
+	hex
+	default 0x0
+	help
+	  Some U-Boot pointers have redundant information, so we can use a
+	  scheme where we can return either an error code or a pointer with the
+	  same return value. The default implementation just casts the pointer
+	  to a number, however, this may fail on platforms where the end of the
+	  address range is used for valid pointers (e.g. 0xffffff00 is a valid
+	  heap pointer in socfpga SPL).
+	  For such platforms, this value provides an upper range of those error
+	  pointer values - up to 'MAX_ERRNO' bytes below this value must be
+	  unused/invalid addresses.
+
 endmenu		# General setup
 
 menu "Boot images"
@@ -364,6 +383,14 @@ config FIT_ENABLE_RSASSA_PSS_SUPPORT
 	  Enable this to support the pss padding algorithm as described
 	  in the rfc8017 (https://tools.ietf.org/html/rfc8017).
 
+config FIT_CIPHER
+	bool "Enable ciphering data in a FIT uImages"
+	depends on DM
+	select AES
+	help
+	  Enable the feature of data ciphering/unciphering in the tool mkimage
+	  and in the u-boot support of the FIT image.
+
 config FIT_VERBOSE
 	bool "Show verbose messages when FIT images fail"
 	help
@@ -425,6 +452,24 @@ config SPL_LOAD_FIT
 	  particular it can handle selecting from multiple device tree
 	  and passing the correct one to U-Boot.
 
+config SPL_LOAD_FIT_APPLY_OVERLAY
+	bool "Enable SPL applying DT overlays from FIT"
+	depends on SPL_LOAD_FIT
+	select OF_LIBFDT_OVERLAY
+	help
+	  The device tree is loaded from the FIT image. Allow the SPL is to
+	  also load device-tree overlays from the FIT image an apply them
+	  over the device tree.
+
+config SPL_LOAD_FIT_APPLY_OVERLAY_BUF_SZ
+	depends on SPL_LOAD_FIT_APPLY_OVERLAY
+	default 0x10000
+	hex "size of temporary buffer used to load the overlays"
+	help
+	  The size of the area where the overlays will be loaded and
+	  uncompress. Must be at least as large as biggest overlay
+	  (uncompressed)
+
 config SPL_LOAD_FIT_FULL
 	bool "Enable SPL loading U-Boot as a FIT (full fitImage features)"
 	select SPL_FIT
@@ -463,6 +508,8 @@ config SPL_FIT_GENERATOR
 	depends on SPL_FIT
 	default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
 	default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
+	default "arch/arm/mach-zynqmp/mkimage_fit_atf.sh" if SPL_LOAD_FIT && ARCH_ZYNQMP
+	default "arch/riscv/lib/mkimage_fit_opensbi.sh" if SPL_LOAD_FIT && RISCV
 	help
 	  Specifies a (platform specific) script file to generate the FIT
 	  source file used to build the U-Boot FIT image file. This gets
@@ -525,9 +572,14 @@ config SYS_EXTRA_OPTIONS
 	  configuration to Kconfig. Since this option will be removed sometime,
 	  new boards should not use this option.
 
-config SYS_TEXT_BASE
+config HAVE_SYS_TEXT_BASE
+	bool
 	depends on !NIOS2 && !XTENSA
 	depends on !EFI_APP
+	default y
+
+config SYS_TEXT_BASE
+	depends on HAVE_SYS_TEXT_BASE
 	default 0x80800000 if ARCH_OMAP2PLUS || ARCH_K3
 	default 0x4a000000 if ARCH_SUNXI && !MACH_SUN9I && !MACH_SUN8I_V3S
 	default 0x2a000000 if ARCH_SUNXI && MACH_SUN9I
@@ -536,8 +588,6 @@ config SYS_TEXT_BASE
 	help
 	  The address in memory that U-Boot will be running from, initially.
 
-
-
 config SYS_CLK_FREQ
 	depends on ARC || ARCH_SUNXI || MPC83xx
 	int "CPU clock frequency"