X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=Kconfig;h=99cc56f3c2b07f4c1c39fcef5d58b6fc3c7efd6d;hb=9c6bf1715f6afd97cb9cf79d68cc00a81d5a9efa;hp=fcde0c35e2c4ee85ece6f982251352dcb3f2feff;hpb=ef84dddd8354bfd7d86ac2411edd3950613b5748;p=oweals%2Fu-boot.git

diff --git a/Kconfig b/Kconfig
index fcde0c35e2..99cc56f3c2 100644
--- a/Kconfig
+++ b/Kconfig
@@ -20,6 +20,13 @@ config BROKEN
 	  This option cannot be enabled. It is used as dependency
 	  for broken and incomplete features.
 
+config DEPRECATED
+	bool
+	help
+	  This option cannot be enabled.  It it used as a dependency for
+	  code that relies on deprecated features that will be removed and
+	  the conversion deadline has passed.
+
 config LOCALVERSION
 	string "Local version - append to U-Boot release"
 	help
@@ -81,6 +88,7 @@ config DISTRO_DEFAULTS
 	select CMD_PART if PARTITIONS
 	select CMD_PING if CMD_NET
 	select CMD_PXE if NET
+	select CMD_SYSBOOT
 	select ENV_VARS_UBOOT_CONFIG
 	select HUSH_PARSER
 	select SUPPORT_RAW_INITRD
@@ -138,6 +146,8 @@ config SYS_MALLOC_F_LEN
 	depends on SYS_MALLOC_F
 	default 0x1000 if AM33XX
 	default 0x2800 if SANDBOX
+	default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \
+			   ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5)
 	default 0x400
 	help
 	  Before relocation, memory is very limited on many platforms. Still,
@@ -147,14 +157,16 @@ config SYS_MALLOC_F_LEN
 
 config SYS_MALLOC_LEN
 	hex "Define memory for Dynamic allocation"
-	depends on ARCH_ZYNQ || ARCH_VERSAL || ARCH_STM32MP
+	depends on ARCH_ZYNQ || ARCH_VERSAL || ARCH_STM32MP || ARCH_ROCKCHIP
+	default 0x2000000 if ARCH_ROCKCHIP
 	help
 	  This defines memory to be allocated for Dynamic allocation
 	  TODO: Use for other architectures
 
 config SPL_SYS_MALLOC_F_LEN
 	hex "Size of malloc() pool in SPL before relocation"
-	depends on SYS_MALLOC_F
+	depends on SYS_MALLOC_F && SPL
+	default 0x2800 if RCAR_GEN3
 	default SYS_MALLOC_F_LEN
 	help
 	  Before relocation, memory is very limited on many platforms. Still,
@@ -164,7 +176,7 @@ config SPL_SYS_MALLOC_F_LEN
 
 config TPL_SYS_MALLOC_F_LEN
 	hex "Size of malloc() pool in TPL before relocation"
-	depends on SYS_MALLOC_F
+	depends on SYS_MALLOC_F && TPL
 	default SYS_MALLOC_F_LEN
 	help
 	  Before relocation, memory is very limited on many platforms. Still,
@@ -228,6 +240,7 @@ config SPL_IMAGE
 	string "SPL image used in the combined SPL+U-Boot image"
 	default "spl/boot.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
 	default "spl/u-boot-spl.bin"
+	depends on SPL
 	help
 	  Select the SPL build target that shall be generated by the SPL
 	  build process (default spl/u-boot-spl.bin). This image will be
@@ -240,9 +253,11 @@ config BUILD_TARGET
 	default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
 	default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
 	default "u-boot-elf.srec" if RCAR_GEN3
-	default "u-boot.itb" if SPL_LOAD_FIT && ARCH_SUNXI
+	default "u-boot.itb" if SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
+				ARCH_SUNXI || RISCV)
 	default "u-boot.kwb" if KIRKWOOD
 	default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
+	default "u-boot-with-spl.imx" if ARCH_MX6 && SPL
 	help
 	  Some SoCs need special image types (e.g. U-Boot binary
 	  with a special header) as build targets. By defining
@@ -250,6 +265,37 @@ config BUILD_TARGET
 	  special image will be automatically built upon calling
 	  make / buildman.
 
+config SYS_CUSTOM_LDSCRIPT
+	bool "Use a custom location for the U-Boot linker script"
+	help
+	  Normally when linking U-Boot we will look in the board directory,
+	  the CPU directory and finally the "cpu" directory of the architecture
+	  for the ile "u-boot.lds" and use that as our linker.  However, in
+	  some cases we need to provide a different linker script.  To do so,
+	  enable this option and then provide the location under
+	  CONFIG_SYS_LDSCRIPT.
+
+config SYS_LDSCRIPT
+	depends on SYS_CUSTOM_LDSCRIPT
+	string "Custom ldscript location"
+	help
+	  Path within the source tree to the linker script to use for the
+	  main U-Boot binary.
+
+config ERR_PTR_OFFSET
+	hex
+	default 0x0
+	help
+	  Some U-Boot pointers have redundant information, so we can use a
+	  scheme where we can return either an error code or a pointer with the
+	  same return value. The default implementation just casts the pointer
+	  to a number, however, this may fail on platforms where the end of the
+	  address range is used for valid pointers (e.g. 0xffffff00 is a valid
+	  heap pointer in socfpga SPL).
+	  For such platforms, this value provides an upper range of those error
+	  pointer values - up to 'MAX_ERRNO' bytes below this value must be
+	  unused/invalid addresses.
+
 endmenu		# General setup
 
 menu "Boot images"
@@ -317,7 +363,7 @@ config FIT_SIGNATURE
 	  check the legacy image format is disabled by default, so that
 	  unsigned images cannot be loaded. If a board needs the legacy image
 	  format support in this case, enable it using
-	  CONFIG_IMAGE_FORMAT_LEGACY.
+	  CONFIG_LEGACY_IMAGE_FORMAT.
 
 config FIT_SIGNATURE_MAX_SIZE
 	hex "Max size of signed FIT structures"
@@ -388,7 +434,7 @@ config SPL_FIT_SIGNATURE
 	select SPL_RSA
 
 config SPL_LOAD_FIT
-	bool "Enable SPL loading U-Boot as a FIT"
+	bool "Enable SPL loading U-Boot as a FIT (basic fitImage features)"
 	select SPL_FIT
 	help
 	  Normally with the SPL framework a legacy image is generated as part
@@ -398,8 +444,26 @@ config SPL_LOAD_FIT
 	  particular it can handle selecting from multiple device tree
 	  and passing the correct one to U-Boot.
 
+config SPL_LOAD_FIT_APPLY_OVERLAY
+	bool "Enable SPL applying DT overlays from FIT"
+	depends on SPL_LOAD_FIT
+	select OF_LIBFDT_OVERLAY
+	help
+	  The device tree is loaded from the FIT image. Allow the SPL is to
+	  also load device-tree overlays from the FIT image an apply them
+	  over the device tree.
+
+config SPL_LOAD_FIT_APPLY_OVERLAY_BUF_SZ
+	depends on SPL_LOAD_FIT_APPLY_OVERLAY
+	default 0x10000
+	hex "size of temporary buffer used to load the overlays"
+	help
+	  The size of the area where the overlays will be loaded and
+	  uncompress. Must be at least as large as biggest overlay
+	  (uncompressed)
+
 config SPL_LOAD_FIT_FULL
-	bool "Enable SPL loading U-Boot as a FIT"
+	bool "Enable SPL loading U-Boot as a FIT (full fitImage features)"
 	select SPL_FIT
 	help
 	  Normally with the SPL framework a legacy image is generated as part
@@ -436,6 +500,7 @@ config SPL_FIT_GENERATOR
 	depends on SPL_FIT
 	default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
 	default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
+	default "arch/riscv/lib/mkimage_fit_opensbi.sh" if SPL_LOAD_FIT && RISCV
 	help
 	  Specifies a (platform specific) script file to generate the FIT
 	  source file used to build the U-Boot FIT image file. This gets
@@ -446,7 +511,7 @@ endif # SPL
 
 endif # FIT
 
-config IMAGE_FORMAT_LEGACY
+config LEGACY_IMAGE_FORMAT
 	bool "Enable support for the legacy image format"
 	default y if !FIT_SIGNATURE
 	help
@@ -498,9 +563,14 @@ config SYS_EXTRA_OPTIONS
 	  configuration to Kconfig. Since this option will be removed sometime,
 	  new boards should not use this option.
 
-config SYS_TEXT_BASE
+config HAVE_SYS_TEXT_BASE
+	bool
 	depends on !NIOS2 && !XTENSA
 	depends on !EFI_APP
+	default y
+
+config SYS_TEXT_BASE
+	depends on HAVE_SYS_TEXT_BASE
 	default 0x80800000 if ARCH_OMAP2PLUS || ARCH_K3
 	default 0x4a000000 if ARCH_SUNXI && !MACH_SUN9I && !MACH_SUN8I_V3S
 	default 0x2a000000 if ARCH_SUNXI && MACH_SUN9I
@@ -509,8 +579,6 @@ config SYS_TEXT_BASE
 	help
 	  The address in memory that U-Boot will be running from, initially.
 
-
-
 config SYS_CLK_FREQ
 	depends on ARC || ARCH_SUNXI || MPC83xx
 	int "CPU clock frequency"