X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=Kconfig;h=92fc4fc135a435bcd837fce90e92eb9f39d415ca;hb=1e354cb3931472c6e88aa6c46d4bda9beddfdcc4;hp=df8f2946c563963f7ff982f59d3cc8fc114d4f1d;hpb=33ca4096845a57bd7a202a3ddc149917f15f8ecc;p=oweals%2Fu-boot.git

diff --git a/Kconfig b/Kconfig
index df8f2946c5..92fc4fc135 100644
--- a/Kconfig
+++ b/Kconfig
@@ -88,6 +88,7 @@ config DISTRO_DEFAULTS
 	select CMD_PART if PARTITIONS
 	select CMD_PING if CMD_NET
 	select CMD_PXE if NET
+	select CMD_SYSBOOT
 	select ENV_VARS_UBOOT_CONFIG
 	select HUSH_PARSER
 	select SUPPORT_RAW_INITRD
@@ -156,14 +157,15 @@ config SYS_MALLOC_F_LEN
 
 config SYS_MALLOC_LEN
 	hex "Define memory for Dynamic allocation"
-	depends on ARCH_ZYNQ || ARCH_VERSAL || ARCH_STM32MP
+	depends on ARCH_ZYNQ || ARCH_VERSAL || ARCH_STM32MP || ARCH_ROCKCHIP
+	default 0x2000000 if ARCH_ROCKCHIP
 	help
 	  This defines memory to be allocated for Dynamic allocation
 	  TODO: Use for other architectures
 
 config SPL_SYS_MALLOC_F_LEN
 	hex "Size of malloc() pool in SPL before relocation"
-	depends on SYS_MALLOC_F
+	depends on SYS_MALLOC_F && SPL
 	default 0x2800 if RCAR_GEN3
 	default SYS_MALLOC_F_LEN
 	help
@@ -174,7 +176,7 @@ config SPL_SYS_MALLOC_F_LEN
 
 config TPL_SYS_MALLOC_F_LEN
 	hex "Size of malloc() pool in TPL before relocation"
-	depends on SYS_MALLOC_F
+	depends on SYS_MALLOC_F && TPL
 	default SYS_MALLOC_F_LEN
 	help
 	  Before relocation, memory is very limited on many platforms. Still,
@@ -238,6 +240,7 @@ config SPL_IMAGE
 	string "SPL image used in the combined SPL+U-Boot image"
 	default "spl/boot.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
 	default "spl/u-boot-spl.bin"
+	depends on SPL
 	help
 	  Select the SPL build target that shall be generated by the SPL
 	  build process (default spl/u-boot-spl.bin). This image will be
@@ -250,9 +253,11 @@ config BUILD_TARGET
 	default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
 	default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
 	default "u-boot-elf.srec" if RCAR_GEN3
-	default "u-boot.itb" if SPL_LOAD_FIT && (ROCKCHIP_RK3399 || ARCH_SUNXI)
+	default "u-boot.itb" if SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
+				ARCH_SUNXI || RISCV)
 	default "u-boot.kwb" if KIRKWOOD
 	default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
+	default "u-boot-with-spl.imx" if ARCH_MX6 && SPL
 	help
 	  Some SoCs need special image types (e.g. U-Boot binary
 	  with a special header) as build targets. By defining
@@ -277,6 +282,20 @@ config SYS_LDSCRIPT
 	  Path within the source tree to the linker script to use for the
 	  main U-Boot binary.
 
+config ERR_PTR_OFFSET
+	hex
+	default 0x0
+	help
+	  Some U-Boot pointers have redundant information, so we can use a
+	  scheme where we can return either an error code or a pointer with the
+	  same return value. The default implementation just casts the pointer
+	  to a number, however, this may fail on platforms where the end of the
+	  address range is used for valid pointers (e.g. 0xffffff00 is a valid
+	  heap pointer in socfpga SPL).
+	  For such platforms, this value provides an upper range of those error
+	  pointer values - up to 'MAX_ERRNO' bytes below this value must be
+	  unused/invalid addresses.
+
 endmenu		# General setup
 
 menu "Boot images"
@@ -344,7 +363,7 @@ config FIT_SIGNATURE
 	  check the legacy image format is disabled by default, so that
 	  unsigned images cannot be loaded. If a board needs the legacy image
 	  format support in this case, enable it using
-	  CONFIG_IMAGE_FORMAT_LEGACY.
+	  CONFIG_LEGACY_IMAGE_FORMAT.
 
 config FIT_SIGNATURE_MAX_SIZE
 	hex "Max size of signed FIT structures"
@@ -463,6 +482,7 @@ config SPL_FIT_GENERATOR
 	depends on SPL_FIT
 	default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
 	default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
+	default "arch/riscv/lib/mkimage_fit_opensbi.sh" if SPL_LOAD_FIT && RISCV
 	help
 	  Specifies a (platform specific) script file to generate the FIT
 	  source file used to build the U-Boot FIT image file. This gets
@@ -473,7 +493,7 @@ endif # SPL
 
 endif # FIT
 
-config IMAGE_FORMAT_LEGACY
+config LEGACY_IMAGE_FORMAT
 	bool "Enable support for the legacy image format"
 	default y if !FIT_SIGNATURE
 	help