X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=Kconfig;h=7a5491bd6775b5d0420777f6cb1a42790940cc09;hb=3ef55a74739a09b2f56495a3fe5852b15f09b9d9;hp=42672a92df4dd03cf416e92968bb43a3a2e6d474;hpb=9450ab2ba8d720bd9f73bccc0af2e2b5a2c2aaf1;p=oweals%2Fu-boot.git

diff --git a/Kconfig b/Kconfig
index 42672a92df..7a5491bd67 100644
--- a/Kconfig
+++ b/Kconfig
@@ -126,6 +126,7 @@ config SYS_BOOT_GET_KBD
 config SYS_MALLOC_F
 	bool "Enable malloc() pool before relocation"
 	default y if DM
+
 	help
 	  Before relocation, memory is very limited on many platforms. Still,
 	  we can provide a small malloc() pool if needed. Driver model in
@@ -136,6 +137,7 @@ config SYS_MALLOC_F_LEN
 	hex "Size of malloc() pool before relocation"
 	depends on SYS_MALLOC_F
 	default 0x1000 if AM33XX
+	default 0x2800 if SANDBOX
 	default 0x400
 	help
 	  Before relocation, memory is very limited on many platforms. Still,
@@ -211,7 +213,7 @@ config PHYS_64BIT
 	help
 	  Say Y here to support 64bit physical memory address.
 	  This can be used not only for 64bit SoCs, but also for
-	  large physical address extention on 32bit SoCs.
+	  large physical address extension on 32bit SoCs.
 
 config BUILD_ROM
 	bool "Build U-Boot as BIOS replacement"
@@ -222,6 +224,32 @@ config BUILD_ROM
 	  which are not shipped in the U-Boot source tree.
 	  Please, see doc/README.x86 for details.
 
+config SPL_IMAGE
+	string "SPL image used in the combined SPL+U-Boot image"
+	default "spl/boot.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
+	default "spl/u-boot-spl.bin"
+	help
+	  Select the SPL build target that shall be generated by the SPL
+	  build process (default spl/u-boot-spl.bin). This image will be
+	  used to generate a combined image with SPL and main U-Boot
+	  proper as one single image.
+
+config BUILD_TARGET
+	string "Build target special images"
+	default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_ARRIA10
+	default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
+	default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
+	default "u-boot-elf.srec" if RCAR_GEN3
+	default "u-boot.itb" if SPL_LOAD_FIT && ARCH_SUNXI
+	default "u-boot.kwb" if KIRKWOOD
+	default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
+	help
+	  Some SoCs need special image types (e.g. U-Boot binary
+	  with a special header) as build targets. By defining
+	  CONFIG_BUILD_TARGET in the SoC / board header, this
+	  special image will be automatically built upon calling
+	  make / buildman.
+
 endmenu		# General setup
 
 menu "Boot images"
@@ -249,6 +277,16 @@ config FIT
 
 if FIT
 
+config FIT_EXTERNAL_OFFSET
+	hex "Text Base"
+	default 0x0
+	help
+	  This specifies a data offset in fit image.
+	  The offset is from data payload offset to the beginning of
+	  fit image header. When specifies a offset, specific data
+	  could be put in the hole between data payload and fit image
+	  header, such as CSF data on i.MX platform.
+
 config FIT_ENABLE_SHA256_SUPPORT
 	bool "Support SHA256 checksum of FIT image contents"
 	default y