X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=Kconfig;h=66148ce477908e3129c9e3b3804c7fb7fbc1855b;hb=823c4cd74901d760f2cd82435664c36583e8bb16;hp=1f0904f7045e965a6c3e26f6f2e465dc3d39c06c;hpb=109f82bea906478807d831978dc680d3ef992f17;p=oweals%2Fu-boot.git

diff --git a/Kconfig b/Kconfig
index 1f0904f704..66148ce477 100644
--- a/Kconfig
+++ b/Kconfig
@@ -88,6 +88,7 @@ config DISTRO_DEFAULTS
 	select CMD_PART if PARTITIONS
 	select CMD_PING if CMD_NET
 	select CMD_PXE if NET
+	select CMD_SYSBOOT
 	select ENV_VARS_UBOOT_CONFIG
 	select HUSH_PARSER
 	select SUPPORT_RAW_INITRD
@@ -146,7 +147,9 @@ config SYS_MALLOC_F_LEN
 	default 0x1000 if AM33XX
 	default 0x2800 if SANDBOX
 	default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \
-			   ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5)
+			   ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5 || \
+			   ARCH_LS1012A || ARCH_LS1021A || ARCH_LS1043A || \
+			   ARCH_LS1046A)
 	default 0x400
 	help
 	  Before relocation, memory is very limited on many platforms. Still,
@@ -252,10 +255,11 @@ config BUILD_TARGET
 	default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
 	default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
 	default "u-boot-elf.srec" if RCAR_GEN3
-	default "u-boot.itb" if SPL_LOAD_FIT && (ROCKCHIP_RK3399 || \
-				ARCH_SUNXI || RISCV)
+	default "u-boot.itb" if SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
+				ARCH_SUNXI || RISCV || ARCH_ZYNQMP)
 	default "u-boot.kwb" if KIRKWOOD
 	default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
+	default "u-boot-with-spl.imx" if ARCH_MX6 && SPL
 	help
 	  Some SoCs need special image types (e.g. U-Boot binary
 	  with a special header) as build targets. By defining
@@ -280,6 +284,20 @@ config SYS_LDSCRIPT
 	  Path within the source tree to the linker script to use for the
 	  main U-Boot binary.
 
+config ERR_PTR_OFFSET
+	hex
+	default 0x0
+	help
+	  Some U-Boot pointers have redundant information, so we can use a
+	  scheme where we can return either an error code or a pointer with the
+	  same return value. The default implementation just casts the pointer
+	  to a number, however, this may fail on platforms where the end of the
+	  address range is used for valid pointers (e.g. 0xffffff00 is a valid
+	  heap pointer in socfpga SPL).
+	  For such platforms, this value provides an upper range of those error
+	  pointer values - up to 'MAX_ERRNO' bytes below this value must be
+	  unused/invalid addresses.
+
 endmenu		# General setup
 
 menu "Boot images"
@@ -367,6 +385,14 @@ config FIT_ENABLE_RSASSA_PSS_SUPPORT
 	  Enable this to support the pss padding algorithm as described
 	  in the rfc8017 (https://tools.ietf.org/html/rfc8017).
 
+config FIT_CIPHER
+	bool "Enable ciphering data in a FIT uImages"
+	depends on DM
+	select AES
+	help
+	  Enable the feature of data ciphering/unciphering in the tool mkimage
+	  and in the u-boot support of the FIT image.
+
 config FIT_VERBOSE
 	bool "Show verbose messages when FIT images fail"
 	help
@@ -428,6 +454,24 @@ config SPL_LOAD_FIT
 	  particular it can handle selecting from multiple device tree
 	  and passing the correct one to U-Boot.
 
+config SPL_LOAD_FIT_APPLY_OVERLAY
+	bool "Enable SPL applying DT overlays from FIT"
+	depends on SPL_LOAD_FIT
+	select OF_LIBFDT_OVERLAY
+	help
+	  The device tree is loaded from the FIT image. Allow the SPL is to
+	  also load device-tree overlays from the FIT image an apply them
+	  over the device tree.
+
+config SPL_LOAD_FIT_APPLY_OVERLAY_BUF_SZ
+	depends on SPL_LOAD_FIT_APPLY_OVERLAY
+	default 0x10000
+	hex "size of temporary buffer used to load the overlays"
+	help
+	  The size of the area where the overlays will be loaded and
+	  uncompress. Must be at least as large as biggest overlay
+	  (uncompressed)
+
 config SPL_LOAD_FIT_FULL
 	bool "Enable SPL loading U-Boot as a FIT (full fitImage features)"
 	select SPL_FIT
@@ -466,6 +510,7 @@ config SPL_FIT_GENERATOR
 	depends on SPL_FIT
 	default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
 	default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
+	default "arch/arm/mach-zynqmp/mkimage_fit_atf.sh" if SPL_LOAD_FIT && ARCH_ZYNQMP
 	default "arch/riscv/lib/mkimage_fit_opensbi.sh" if SPL_LOAD_FIT && RISCV
 	help
 	  Specifies a (platform specific) script file to generate the FIT
@@ -529,9 +574,14 @@ config SYS_EXTRA_OPTIONS
 	  configuration to Kconfig. Since this option will be removed sometime,
 	  new boards should not use this option.
 
-config SYS_TEXT_BASE
+config HAVE_SYS_TEXT_BASE
+	bool
 	depends on !NIOS2 && !XTENSA
 	depends on !EFI_APP
+	default y
+
+config SYS_TEXT_BASE
+	depends on HAVE_SYS_TEXT_BASE
 	default 0x80800000 if ARCH_OMAP2PLUS || ARCH_K3
 	default 0x4a000000 if ARCH_SUNXI && !MACH_SUN9I && !MACH_SUN8I_V3S
 	default 0x2a000000 if ARCH_SUNXI && MACH_SUN9I
@@ -540,8 +590,6 @@ config SYS_TEXT_BASE
 	help
 	  The address in memory that U-Boot will be running from, initially.
 
-
-
 config SYS_CLK_FREQ
 	depends on ARC || ARCH_SUNXI || MPC83xx
 	int "CPU clock frequency"