X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;ds=sidebyside;f=lib%2FKconfig;h=af5c38afd98b29a05024a7108369fcc1f27ce362;hb=164873a0c02ddbc9a59ad3a0670f17684fc00737;hp=b8a8509d720faa45ca569c1233a5c7ff8ef4c5d3;hpb=e64ebde12dc82e80f81a74d66b48da2fe598041f;p=oweals%2Fu-boot.git

diff --git a/lib/Kconfig b/lib/Kconfig
index b8a8509d72..af5c38afd9 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -7,6 +7,16 @@ config BCH
 	  This is used by SoC platforms which do not have built-in ELM
 	  hardware engine required for BCH ECC correction.
 
+config BINMAN_FDT
+	bool "Allow access to binman information in the device tree"
+	depends on BINMAN && OF_CONTROL
+	default y
+	help
+	  This enables U-Boot to access information about binman entries,
+	  stored in the device tree in a binman node. Typical uses are to
+	  locate entries in the firmware image. See binman.h for the available
+	  functionality.
+
 config CC_OPTIMIZE_LIBS_FOR_SPEED
 	bool "Optimize libraries for speed"
 	help
@@ -96,7 +106,7 @@ config SYS_HZ
 	  set to 1000.
 
 config SPL_USE_TINY_PRINTF
-	bool "Enable tiny printf() version"
+	bool "Enable tiny printf() version in SPL"
 	depends on SPL
 	default y
 	help
@@ -108,7 +118,7 @@ config SPL_USE_TINY_PRINTF
 	  The supported format specifiers are %c, %s, %u/%d and %x.
 
 config TPL_USE_TINY_PRINTF
-	bool "Enable tiny printf() version"
+	bool "Enable tiny printf() version in TPL"
 	depends on TPL
 	default y if SPL_USE_TINY_PRINTF
 	help
@@ -140,7 +150,8 @@ config REGEX
 
 choice
 	prompt "Pseudo-random library support type"
-	depends on NET_RANDOM_ETHADDR || RANDOM_UUID || CMD_UUID
+	depends on NET_RANDOM_ETHADDR || RANDOM_UUID || CMD_UUID || \
+		   RNG_SANDBOX || UT_LIB && AES
 	default LIB_RAND
 	help
 	  Select the library to provide pseudo-random number generator
@@ -151,7 +162,7 @@ config LIB_RAND
 	bool "Pseudo-random library support"
 
 config LIB_HW_RAND
-	bool "HW Engine for random libray support"
+	bool "HW Engine for random library support"
 
 endchoice
 
@@ -265,6 +276,7 @@ config AES
 	  present.
 
 source lib/rsa/Kconfig
+source lib/crypto/Kconfig
 
 config TPM
 	bool "Trusted Platform Module (TPM) Support"
@@ -351,7 +363,22 @@ config SHA_PROG_HW_ACCEL
 	  is performed in hardware.
 
 config MD5
-	bool
+	bool "Support MD5 algorithm"
+	help
+	  This option enables MD5 support. MD5 is an algorithm designed
+	  in 1991 that produces a 16-byte digest (or checksum) from its input
+	  data. It has a number of vulnerabilities which preclude its use in
+	  security applications, but it can be useful for providing a quick
+	  checksum of a block of data.
+
+config SPL_MD5
+	bool "Support MD5 algorithm in SPL"
+	help
+	  This option enables MD5 support in SPL. MD5 is an algorithm designed
+	  in 1991 that produces a 16-byte digest (or checksum) from its input
+	  data. It has a number of vulnerabilities which preclude its use in
+	  security applications, but it can be useful for providing a quick
+	  checksum of a block of data.
 
 config CRC32C
 	bool
@@ -397,6 +424,15 @@ config GZIP
 	help
 	  This enables support for GZIP compression algorithm.
 
+config GZIP_COMPRESSED
+	bool
+	select ZLIB
+
+config BZIP2
+	bool "Enable bzip2 decompression support"
+	help
+	  This enables support for BZIP2 compression algorithm.
+
 config ZLIB
 	bool
 	default y
@@ -412,11 +448,16 @@ config ZSTD
 config SPL_LZ4
 	bool "Enable LZ4 decompression support in SPL"
 	help
-	  This enables support for tge LZ4 decompression algorithm in SPL. LZ4
+	  This enables support for the LZ4 decompression algorithm in SPL. LZ4
 	  is a lossless data compression algorithm that is focused on
 	  fast compression and decompression speed. It belongs to the LZ77
 	  family of byte-oriented compression schemes.
 
+config SPL_LZMA
+	bool "Enable LZMA decompression support for SPL build"
+	help
+	  This enables support for LZMA compression algorithm for SPL boot.
+
 config SPL_LZO
 	bool "Enable LZO decompression support in SPL"
 	help
@@ -566,6 +607,19 @@ config SMBIOS_PRODUCT_NAME
 
 endmenu
 
+config ASN1_COMPILER
+	bool
+
+config ASN1_DECODER
+	bool
+	help
+	  Enable asn1 decoder library.
+
+config OID_REGISTRY
+	bool
+	help
+	  Enable fast lookup object identifier registry.
+
 source lib/efi/Kconfig
 source lib/efi_loader/Kconfig
 source lib/optee/Kconfig
@@ -574,4 +628,13 @@ config TEST_FDTDEC
 	bool "enable fdtdec test"
 	depends on OF_LIBFDT
 
+config LIB_DATE
+	bool
+
+config LIB_ELF
+	bool
+	help
+	  Supoort basic elf loading/validating functions.
+	  This supports fir 32 bit and 64 bit versions.
+
 endmenu