X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fwoodburn_common.h;h=5d9f5297ce81e691efcf8805f364e6875da8392f;hb=c9a67d2489d68abac2f3be151abf1f09126b91a2;hp=259205e88176cdeb8bd232403851a35acfb81972;hpb=55e8250bd3cfd996d1caa04f520160a89ec04754;p=oweals%2Fu-boot.git

diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h
index 259205e881..5d9f5297ce 100644
--- a/include/configs/woodburn_common.h
+++ b/include/configs/woodburn_common.h
@@ -14,7 +14,6 @@
 #include <asm/arch/imx-regs.h>
 
  /* High Level Configuration Options */
-#define CONFIG_ARM1136	/* This is an arm1136 CPU core */
 #define CONFIG_MX35
 #define CONFIG_MX35_HCLK_FREQ	24000000
 
@@ -22,6 +21,7 @@
 #define CONFIG_SYS_CACHELINE_SIZE	32
 
 #define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_SYS_GENERIC_BOARD
 
 /* Only in case the value is not present in mach-types.h */
 #ifndef MACH_TYPE_FLEA3
@@ -47,6 +47,7 @@
  */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_SPD_BUS_NUM		0
 #define CONFIG_MXC_SPI
 #define CONFIG_MXC_GPIO
@@ -81,9 +82,6 @@
 /*
  * Command definition
  */
-
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
@@ -97,7 +95,6 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_SPI
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 
 #define CONFIG_CMD_MMC
 #define CONFIG_DOS_PARTITION
@@ -133,7 +130,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP	/* undef to save memory */
-#define CONFIG_SYS_PROMPT	"woodburn U-Boot > "
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_HUSH_PARSER	/* Use the HUSH parser */
 
@@ -147,8 +143,6 @@
 #define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x10000
 
-#undef	CONFIG_SYS_CLKS_IN_HZ	/* everything, incl board info, in Hz */
-
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
 /*
@@ -242,8 +236,6 @@
  * Default environment and default scripts
  * to update uboot and load kernel
  */
-#define xstr(s)	str(s)
-#define str(s)	#s
 
 #define CONFIG_HOSTNAME woodburn
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
@@ -263,9 +255,9 @@
 	"addmisc=setenv bootargs ${bootargs} ${misc}\0"			\
 	"loadaddr=80800000\0"						\
 	"kernel_addr_r=80800000\0"					\
-	"hostname=" xstr(CONFIG_HOSTNAME) "\0"				\
-	"bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0"			\
-	"ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0"		\
+	"hostname=" __stringify(CONFIG_HOSTNAME) "\0"			\
+	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
+	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"	\
 	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
@@ -279,9 +271,9 @@
 		"run ramargs addip addtty addmtd addmisc;"		\
 		"bootm ${kernel_addr_r} ${ramdisk_addr_r};"		\
 		"else echo Images not loades;fi\0"			\
-	"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0"			\
+	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
 	"load=tftp ${loadaddr} ${u-boot}\0"				\
-	"uboot_addr=" xstr(CONFIG_SYS_MONITOR_BASE) "\0"		\
+	"uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"		\
 	"update=protect off ${uboot_addr} +80000;"			\
 		"erase ${uboot_addr} +80000;"				\
 		"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"		\