X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fsbc405.h;h=346c8479e9751b1b18941c42ee1d2b8959d7a127;hb=29c6fbe0471afd7ffa41fcb2103eec5b53294897;hp=d93ca2d98f2adaece7c8d70831ef7f8eb3e01893;hpb=f82642e33899766892499b163e60560fbbf87773;p=oweals%2Fu-boot.git

diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h
index d93ca2d98f..346c8479e9 100644
--- a/include/configs/sbc405.h
+++ b/include/configs/sbc405.h
@@ -36,6 +36,8 @@
 #define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
 #define CONFIG_SBC405		1	/* ...on a WR SBC405 board	*/
 
+#define	CONFIG_SYS_TEXT_BASE	0xFFFC0000
+
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
 #define CONFIG_MISC_INIT_R	1	/* call misc_init_r()		*/
 
@@ -58,9 +60,11 @@
 #define CONFIG_BOOTCOMMAND      "version;echo;tftpboot ${loadaddr} ${loadfile};bootvx"      /* autoboot command     */
 
 
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_PHY_RESET_DELAY	300	/* Intel LXT971A needs this	*/
+#define CONFIG_NET_MULTI
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"bootargs=emac(0,0)host:/T221ppc/target/config/sbc405/vxWorks.st " \
@@ -145,8 +149,13 @@
 #define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
 #define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
 
+#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
+
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK		/* no external serial clock used */
-#define CONFIG_SYS_IGNORE_405_UART_ERRATA_59	/* ignore ppc405gp errata #59	*/
 #define CONFIG_SYS_BASE_BAUD		691200
 
 /* The following table includes the supported baudrates */
@@ -165,6 +174,7 @@
 
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
 #undef  CONFIG_SOFT_I2C			/* I2C bit-banged		*/
+#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
 #define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CONFIG_SYS_I2C_SLAVE		0x7F