X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fsama5d3xek.h;h=29b7e8b50a0ec0ba79bf6e7d75f7d4e611cd37d0;hb=e4adc8ed3c684f41a307fde275e683a391f2a7ce;hp=13790e7244b178ff9b655ebb0598322110b6113a;hpb=a8d052b5004b3180b9d28567922acd1b62f9cb15;p=oweals%2Fu-boot.git

diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index 13790e7244..29b7e8b50a 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -17,11 +17,6 @@
 
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
-#define	CONFIG_USART_ID			ATMEL_ID_DBGU
-
 /*
  * This needs to be defined for the OHCI code to work but it is defined as
  * ATMEL_ID_UHPHS in the CPU specific header files.
@@ -39,7 +34,6 @@
 #define CONFIG_LCD_LOGO
 #define CONFIG_LCD_INFO
 #define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_ATMEL_HLCD
 #define CONFIG_ATMEL_LCD_RGB565
 
@@ -62,22 +56,19 @@
 #define CONFIG_SYS_SDRAM_SIZE		0x20000000
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR		0x310000
+#define CONFIG_SYS_INIT_SP_ADDR		0x318000
 #else
 #define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 #endif
 
 /* SerialFlash */
 
 #ifdef CONFIG_CMD_SF
-#define CONFIG_ATMEL_SPI
 #define CONFIG_SF_DEFAULT_SPEED		30000000
 #endif
 
 /* NAND flash */
-#define CONFIG_CMD_NAND
-
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
@@ -87,35 +78,16 @@
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
 #define CONFIG_SYS_NAND_ONFI_DETECTION
+#endif
 /* PMECC & PMERRLOC */
 #define CONFIG_ATMEL_NAND_HWECC
 #define CONFIG_ATMEL_NAND_HW_PMECC
 #define CONFIG_PMECC_CAP		4
 #define CONFIG_PMECC_SECTOR_SIZE	512
-#define CONFIG_CMD_NAND_TRIMFFS
-#endif
-
-/* Ethernet Hardware */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_MACB_SEARCH_PHY
-#define CONFIG_RGMII
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
-#define CONFIG_PHY_MICREL_KSZ9021
-
-/* MMC */
-
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#define ATMEL_BASE_MMCI			ATMEL_BASE_MCI0
-#endif
 
 /* USB */
 
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_UPLL
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
@@ -124,15 +96,6 @@
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	3
 #endif
 
-/* USB device */
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_MANUFACTURER      "Atmel SAMA5D3xEK"
-
-#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_FAT_WRITE
-#endif
-
 #define CONFIG_SYS_LOAD_ADDR			0x22000000 /* load address */
 
 #ifdef CONFIG_SYS_USE_SERIALFLASH
@@ -141,24 +104,20 @@
 /* override the bootcmd, bootargs and other configuration nandflash env */
 #elif CONFIG_SYS_USE_MMC
 /* override the bootcmd, bootargs and other configuration for sd/mmc env */
-#else
-#define CONFIG_ENV_IS_NOWHERE
 #endif
 
 /* SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x300000
-#define CONFIG_SPL_MAX_SIZE		0x10000
+#define CONFIG_SPL_MAX_SIZE		0x18000
 #define CONFIG_SPL_BSS_START_ADDR	0x20000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
 
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 
 #ifdef CONFIG_SYS_USE_MMC
-#define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/armv7/u-boot-spl.lds
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
@@ -176,7 +135,7 @@
 
 #elif CONFIG_SYS_USE_SERIALFLASH
 #define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x8000
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x10000
 
 #endif