X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fomap3_mvblx.h;h=376a3d031edc78fa7c12ce1ca77c3e1f0c8866f2;hb=805fa87f6d2366e2193f3d9eb1f793ad41ae1430;hp=b819d213408e7ac1ca1f14a937d707cebb359bfe;hpb=db917fbfed5ab26d0b86d567a9729ed14c26cc99;p=oweals%2Fu-boot.git

diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h
index b819d21340..376a3d031e 100644
--- a/include/configs/omap3_mvblx.h
+++ b/include/configs/omap3_mvblx.h
@@ -39,6 +39,7 @@
 #define CONFIG_OMAP34XX		1	/* which is a 34XX */
 #define CONFIG_MVBLX		1	/* working with mvBlueLYNX-X */
 #define CONFIG_MACH_TYPE	MACH_TYPE_MVBLX
+#define CONFIG_OMAP_GPIO
 
 #define CONFIG_SDRC	/* The chip has SDRC controller */
 
@@ -55,7 +56,6 @@
 #define V_OSCK			26000000	/* Clock output from T2 */
 #define V_SCLK			(V_OSCK >> 1)
 
-#undef CONFIG_USE_IRQ				/* no support for IRQs */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_OF_LIBFDT		1
@@ -90,9 +90,9 @@
 /*
  * select serial console configuration
  */
-#define CONFIG_CONS_INDEX		3
-#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
-#define CONFIG_SERIAL3			3	/* UART3 */
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_SYS_NS16550_COM1		OMAP34XX_UART1
+#define CONFIG_SERIAL1			1	/* UART1 */
 
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
@@ -102,6 +102,10 @@
 #define CONFIG_OMAP_HSMMC		1
 #define CONFIG_DOS_PARTITION		1
 
+/* silent console by default */
+#define CONFIG_SYS_DEVICE_NULLDEV	1
+#define CONFIG_SILENT_CONSOLE		1
+
 /* USB */
 #define CONFIG_MUSB_UDC			1
 #define CONFIG_USB_OMAP3		1
@@ -142,8 +146,6 @@
 #define CONFIG_HARD_I2C			1
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		0
-#define CONFIG_SYS_I2C_BUS		0 /* This isn't used anywhere ?? */
-#define CONFIG_SYS_I2C_BUS_SELECT	1 /* This isn't used anywhere ?? */
 #define CONFIG_DRIVER_OMAP34XX_I2C	1
 #define CONFIG_I2C_MULTI_BUS		1
 
@@ -154,19 +156,23 @@
 
 /* Environment information */
 #undef CONFIG_ENV_OVERWRITE	/* disallow overwriting serial# and ethaddr */
-#define CONFIG_BOOTDELAY		3
+#define CONFIG_BOOTDELAY		0
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_STOP_STR "S"
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
+	"silent=true\0" \
 	"loadaddr=0x82000000\0" \
 	"usbtty=cdc_acm\0" \
-	"console=ttyO2,115200n8\0" \
+	"console=ttyO0,115200n8\0" \
 	"mpurate=600\0" \
 	"vram=12M\0" \
 	"dvimode=1024x768-24@60\0" \
 	"defaultdisplay=dvi\0" \
-	"fpgafilename=mvbluelynx_x.rbf\0" \
-	"loadfpga=if fatload mmc ${mmcdev} ${loadaddr} ${fpgafilename}; then " \
-		"fpga load 0 ${loadaddr} ${filesize}; " \
+	"loadfpga=if ext2load mmc ${mmcdev}:2 ${loadaddr} "\
+		"/lib/firmware/mvblx/${fpgafilename}; then " \
+			"fpga load 0 ${loadaddr} ${filesize}; " \
 		"fi;\0" \
 	"mmcdev=0\0" \
 	"mmcroot=/dev/mmcblk0p2 rw\0" \
@@ -179,6 +185,7 @@
 		"omapdss.def_disp=${defaultdisplay} " \
 		"root=${mmcroot} " \
 		"rootfstype=${mmcrootfstype} " \
+		"mvfw.fpgavers=${fpgavers} " \
 		"${cmdline_suffix}\0" \
 	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
 	"importbootenv=echo Importing environment from mmc ...; " \
@@ -220,7 +227,6 @@
  */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_SYS_PROMPT		"mvblx # "
 #define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 /* Print Buffer Size */
@@ -247,19 +253,11 @@
 #define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
 #define CONFIG_SYS_HZ			1000
 
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS	1
 #define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE	(32 << 20)	/* at least 32 MiB */
 #define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
 
 #define CONFIG_ENV_IS_NOWHERE	1