X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fls1012ardb.h;h=3cd7baf21dad0ebf812348a13cfd4eba1fec053a;hb=fd399a183991d4a6bc7376b3fe2cbfa4d9b0ada8;hp=438b5a63386fd0338e2cd4504fa8c485ce7fc187;hpb=ae02cf03bc47804e88bb2fbc7cae3560618e6547;p=oweals%2Fu-boot.git

diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
index 438b5a6338..3cd7baf21d 100644
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __LS1012ARDB_H__
@@ -12,19 +11,20 @@
 /* DDR */
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
 #define CONFIG_CHIP_SELECTS_PER_CTRL	1
-#define CONFIG_NR_DRAM_BANKS		2
 #define CONFIG_SYS_SDRAM_SIZE		0x40000000
 #define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
 
 
+/* ENV */
+#define CONFIG_SYS_FSL_QSPI_BASE	0x40000000
 /*
  * I2C IO expander
  */
 
 #define I2C_MUX_IO_ADDR		0x24
+#define I2C_MUX_IO2_ADDR	0x25
 #define I2C_MUX_IO_0		0
 #define I2C_MUX_IO_1		1
 #define SW_BOOT_MASK		0x03
@@ -39,10 +39,12 @@
 #define SW_REV_C2		0xD8
 #define SW_REV_D		0xD0
 #define SW_REV_E		0xC8
+#define __PHY_MASK		0xF9
+#define __PHY_ETH2_MASK		0xFB
+#define __PHY_ETH1_MASK		0xFD
 
 /*  MMC  */
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #endif
 
@@ -52,7 +54,6 @@
 #define CONFIG_PCI_SCAN_SHOW
 
 #define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
 
@@ -63,16 +64,20 @@
 	"initrd_high=0xffffffffffffffff\0"	\
 	"fdt_addr=0x00f00000\0"			\
 	"kernel_addr=0x01000000\0"		\
+	"kernelheader_addr=0x800000\0"		\
 	"scriptaddr=0x80000000\0"		\
+	"scripthdraddr=0x80080000\0"		\
 	"fdtheader_addr_r=0x80100000\0"		\
 	"kernelheader_addr_r=0x80200000\0"	\
 	"kernel_addr_r=0x81000000\0"		\
 	"fdt_addr_r=0x90000000\0"		\
 	"load_addr=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
+	"kernelheader_size=0x40000\0"		\
 	"console=ttyS0,115200\0"		\
 	BOOTENV					\
 	"boot_scripts=ls1012ardb_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls1012ardb_bs.out\0"	\
 	"scan_dev_for_boot_part="		\
 	     "part list ${devtype} ${devnum} devplist; "	\
 	     "env exists devplist || setenv devplist 1; "	\
@@ -90,15 +95,34 @@
 			"run scan_dev_for_scripts; "	  \
 		"done;"					  \
 		"\0"					  \
+	"boot_a_script="				  \
+		"load ${devtype} ${devnum}:${distro_bootpart} "  \
+			"${scriptaddr} ${prefix}${script}; "    \
+		"env exists secureboot && load ${devtype} "     \
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr}; " \
+			"env exists secureboot "	\
+			"&& esbc_validate ${scripthdraddr};"    \
+		"source ${scriptaddr}\0"	  \
 	"installer=load mmc 0:2 $load_addr "	\
 		   "/flex_installer_arm64.itb; "	\
 		   "bootm $load_addr#$board\0"	\
 	"qspi_bootcmd=echo Trying load from qspi..;"	\
 		"sf probe && sf read $load_addr "	\
-		"$kernel_addr $kernel_size && bootm $load_addr#$board\0"
+		"$kernel_addr $kernel_size; env exists secureboot "	\
+		"&& sf read $kernelheader_addr_r $kernelheader_addr "	\
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
+		"bootm $load_addr#$board\0"
 
 #undef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd"
+#ifdef CONFIG_TFABOOT
+#undef QSPI_NOR_BOOTCOMMAND
+#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
+			     "env exists secureboot && esbc_halt;"
+#else
+#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
+			   "env exists secureboot && esbc_halt;"
+#endif
 
 #include <asm/fsl_secure_boot.h>