X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fedb93xx.h;h=f012af547fc85a0d1632ec2a74184164616a53b2;hb=089795090a627f4216c5f21eaf436ba1672cf02e;hp=ce5097348bcae5954289268f76d50aeab2ca88a0;hpb=78d1e1d0a157c8b48ea19be6170b992745d30f38;p=oweals%2Fu-boot.git

diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h
index ce5097348b..f012af547f 100644
--- a/include/configs/edb93xx.h
+++ b/include/configs/edb93xx.h
@@ -25,17 +25,13 @@
 #error "no board defined"
 #endif
 
-
 /* Initial environment and monitor configuration options. */
-#define CONFIG_BOOTDELAY		2
 #define CONFIG_CMDLINE_TAG		1
 #define CONFIG_INITRD_TAG		1
 #define CONFIG_SETUP_MEMORY_TAGS	1
 #define CONFIG_BOOTARGS		"root=/dev/nfs console=ttyAM0,115200 ip=dhcp"
 #define CONFIG_BOOTFILE		"edb93xx.img"
 
-
-
 #define CONFIG_SYS_LDSCRIPT	"board/cirrus/edb93xx/u-boot.lds"
 
 #ifdef CONFIG_EDB9301
@@ -78,7 +74,6 @@
 #define CONFIG_EP93XX		1		/* This is a Cirrus Logic 93xx SoC */
 
 #define CONFIG_SYS_CLK_FREQ	14745600	/* EP93xx has a 14.7456 clock */
-#undef CONFIG_USE_IRQ				/* Don't need IRQ/FIQ */
 
 /* Monitor configuration */
 #undef CONFIG_CMD_DATE
@@ -95,7 +90,6 @@
 /* Serial port hardware configuration */
 #define CONFIG_PL010_SERIAL
 #define CONFIG_CONS_INDEX		0
-#define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, \
                         115200, 230400}
 #define CONFIG_SYS_SERIAL0		0x808C0000
@@ -106,20 +100,7 @@
 #define CONFIG_PL01x_PORTS	{(void *)CONFIG_SYS_SERIAL0}
 
 /* Status LED */
-#define CONFIG_STATUS_LED		1 /* Status LED enabled	*/
-#define CONFIG_BOARD_SPECIFIC_LED	1
-#define STATUS_LED_GREEN		0
-#define STATUS_LED_RED			1
-/* Green */
-#define STATUS_LED_BIT			STATUS_LED_GREEN
-#define STATUS_LED_STATE		STATUS_LED_ON
-#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
-/* Red */
-#define STATUS_LED_BIT1			STATUS_LED_RED
-#define STATUS_LED_STATE1		STATUS_LED_OFF
-#define STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 2)
 /* Optional value */
-#define STATUS_LED_BOOT			STATUS_LED_BIT
 
 /* Network hardware configuration */
 #define CONFIG_DRIVER_EP93XX_MAC
@@ -160,7 +141,6 @@
 #error "no SDCS configuration for this board"
 #endif
 
-
 #if defined(CONFIG_EDB93XX_SDCS3)
 #define CONFIG_SYS_LOAD_ADDR	0x01000000	/* Default load address	*/
 #define PHYS_SDRAM_1		0x00000000
@@ -175,18 +155,11 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
     (CONFIG_SYS_SDRAM_BASE + 32*1024 - GENERATED_GBL_DATA_SIZE)
 
-
 /* Must match kernel config */
 #define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
 
 /* Run-time memory allocatons */
 #define CONFIG_SYS_GBL_DATA_SIZE	128
-#define CONFIG_STACKSIZE		(128 * 1024)
-
-#if defined(CONFIG_USE_IRQ)
-#define CONFIG_STACKSIZE_IRQ	(4 * 1024)
-#define CONFIG_STACKSIZE_FIQ	(4 * 1024)
-#endif
 
 #define CONFIG_SYS_MALLOC_LEN		(512 * 1024)
 
@@ -214,7 +187,6 @@
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
-
 #define CONFIG_SYS_FLASH_PROTECTION
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
@@ -236,19 +208,6 @@
 #define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
 #define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
 
-/* Define to enable MMC on SPI support */
-/* #define CONFIG_EP93XX_SPI_MMC */
-
-#ifdef CONFIG_EP93XX_SPI_MMC
-#define CONFIG_EP93XX_SPI
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC_SPI
-#define CONFIG_CMD_MMC
-#define CONFIG_MMC_SPI_NPOWER_EGPIO	9
-#endif
-
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_USB_OHCI_EP93XX
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
@@ -256,13 +215,6 @@
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"ep93xx-ohci"
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		0x80020000
 
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_FAT
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_CMD_BOOTZ
-
 /* Define to disable flash configuration*/
 /* #define CONFIG_EP93XX_NO_FLASH_CFG */