X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fbcm28155_ap.h;h=d807997277ae88639baa7f4c918a9df8fb1607d2;hb=26822fd23cb1cf5eebe88547d879c01756228748;hp=299674ad491d975be93e2eff3f48d122fbb4c909;hpb=c83a824e62277162ad35f52879b2316902c0eff5;p=oweals%2Fu-boot.git

diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h
index 299674ad49..d807997277 100644
--- a/include/configs/bcm28155_ap.h
+++ b/include/configs/bcm28155_ap.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2013 Broadcom Corporation.
- *
- * SPDX-License-Identifier:      GPL-2.0+
  */
 
 #ifndef __BCM28155_AP_H
@@ -17,14 +16,11 @@
 /*
  * Memory configuration
  */
-#define CONFIG_SYS_TEXT_BASE		0xae000000
 
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 #define CONFIG_SYS_SDRAM_SIZE		0x80000000
-#define CONFIG_NR_DRAM_BANKS		1
 
 #define CONFIG_SYS_MALLOC_LEN		SZ_4M	/* see armv7/start.S. */
-#define CONFIG_STACKSIZE		SZ_256K
 
 /* GPIO Driver */
 #define CONFIG_KONA_GPIO
@@ -58,7 +54,6 @@
 #define CONFIG_SYS_TIMER_COUNTER	(TIMER_BASE_ADDR + 4) /* STCLO offset */
 
 /* Init functions */
-#define CONFIG_MISC_INIT_R	/* board's misc_init_r function */
 
 /* Some commands use this as the default load address */
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
@@ -77,23 +72,13 @@
 /* Post pad 3 bytes after each reg addr */
 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
 #define CONFIG_SYS_NS16550_CLK		13000000
-#define CONFIG_CONS_INDEX		1
 #define CONFIG_SYS_NS16550_COM1		0x3e000000
 
-#define CONFIG_BAUDRATE			115200
-
 /* must fit into GPT:u-boot-env partition */
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		0
-#define CONFIG_ENV_OFFSET		(0x00011a00 * 512)
-#define CONFIG_ENV_SIZE			(8 * 512)
-
-#define CONFIG_SYS_NO_FLASH	/* Not using NAND/NOR unmanaged flash */
 
 /* console configuration */
 #define CONFIG_SYS_CBSIZE		1024	/* Console buffer size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-			sizeof(CONFIG_SYS_PROMPT) + 16)	/* Printbuffer size */
 #define CONFIG_SYS_MAXARGS		64
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
@@ -104,19 +89,10 @@
  */
 
 /* version string, parser, etc */
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
 
 /* Initial upstream - boot to cmd prompt only */
 #define CONFIG_BOOTCOMMAND		""
 
-/* Commands */
-#define CONFIG_FAT_WRITE
-
 #define CONFIG_USBID_ADDR		0x34052c46
 
 #endif /* __BCM28155_AP_H */