X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2FMETROBOX.h;h=d61b49eeecd5261ccb1332340b8bbc46b83d0523;hb=42fd5f87b1613d3039f57e93c16f760a768d3e84;hp=2b4a33f4ca8d668cc28e1f8420bdb8a53f95001a;hpb=22e05df45cc343eda3266312bde676737d9bc70c;p=oweals%2Fu-boot.git

diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h
index 2b4a33f4ca..d61b49eeec 100644
--- a/include/configs/METROBOX.h
+++ b/include/configs/METROBOX.h
@@ -104,6 +104,7 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_METROBOX		  1	     /* Board is Metrobox	*/
 #define CONFIG_440GX		  1	     /* Specifc GX support	*/
+#define CONFIG_440		  1	     /* ... PPC440 family	*/
 #define CONFIG_4xx		  1	     /* ... PPC4xx family	*/
 #define CONFIG_BOARD_EARLY_INIT_F 1	     /* Call board_pre_init	*/
 #define CONFIG_MISC_INIT_F	  1	     /* Call board misc_init_f	*/
@@ -230,6 +231,7 @@
 #define CONFIG_HAS_ETH1
 #define CONFIG_HAS_ETH2
 #define CONFIG_HAS_ETH3
+#define CONFIG_PHY_RESET      1              /* reset phy upon startup  */
 #define CONFIG_CIS8201_PHY    1		     /* RGMII mode for Cicada	*/
 #define CONFIG_CIS8201_SHORT_ETCH 1	     /* Use short etch mode	*/
 #define CONFIG_PHY_GIGE	      1		     /* GbE speed/duplex detect */
@@ -240,26 +242,33 @@
 #define CFG_RX_ETH_BUFFER     32	     /* #eth rx buff & descrs	*/
 
 
-/*-----------------------------------------------------------------------
- * Console/Commands/Parser
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_BEDBUG	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_DIAG	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_NET	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_IDE	| \
-				CFG_CMD_FAT)
-
-/* tbs 09-March-2005 Removed to be able to use 2nd serial */
-/*				  CFG_CMD_KGDB	  | \ */
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
 
 
 /* Include NetConsole support */
@@ -267,13 +276,9 @@
 
 /* Include auto complete with tabs */
 #define CONFIG_AUTO_COMPLETE 1
-#define CFG_AUTO_COMPLETE    1
+#define CONFIG_AUTO_COMPLETE 1
 #define CFG_ALT_MEMTEST	     1	     /* use real memory test	 */
 
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 #define CFG_LONGHELP			     /* undef to save memory	*/
 #define CFG_PROMPT	      "MetroBox=> "  /* Monitor Command Prompt	*/
 
@@ -284,7 +289,7 @@
 /*-----------------------------------------------------------------------
  * Console Buffer
  *----------------------------------------------------------------------*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	      1024	     /* Console I/O Buffer Size */
 #else
 #define CFG_CBSIZE	      256	     /* Console I/O Buffer Size */
@@ -330,7 +335,6 @@
 #define CFG_PCI_TARGBASE      (CFG_PCI_MEMBASE)
 
 /* Board-specific PCI */
-#define CFG_PCI_PRE_INIT		     /* enable board pci_pre_init*/
 #define CFG_PCI_TARGET_INIT		     /* let board init pci target*/
 
 #define CFG_PCI_SUBSYS_VENDORID 0x17BA	     /* Sandburst */
@@ -342,14 +346,6 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE	      8192	     /* For IBM 405 CPUs	*/
-#define CFG_CACHELINE_SIZE    32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT   5		     /* log base 2 of the above */
-#endif
 
 /*
  * Internal Definitions
@@ -359,7 +355,7 @@
 #define BOOTFLAG_COLD	      0x01	     /* Normal PowerOn: Boot from FLASH */
 #define BOOTFLAG_WARM	      0x02	     /* Software reboot */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE  230400	     /* kgdb serial port baud	*/
 #define CONFIG_KGDB_SER_INDEX 2		     /* kgdb serial port	*/
 #endif