X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;ds=sidebyside;f=drivers%2Fvideo%2Fsunxi_display.c;h=269083b6664ec4593de7d477d120ea3f7a8f860a;hb=fdb9f349be255b9b69a5e1a300296779b48a36b0;hp=d2413971c07b5a3881ff96fbe9e0939b7a2e57ca;hpb=f4e7e2d12164c3235c3f5e19a68a503623029d35;p=oweals%2Fu-boot.git diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c index d2413971c0..269083b666 100644 --- a/drivers/video/sunxi_display.c +++ b/drivers/video/sunxi_display.c @@ -11,26 +11,70 @@ #include #include +#include #include +#include #include +#include #include #include -#include +#include #include +#include "videomodes.h" +#include "hitachi_tx18d42vm_lcd.h" +#include "ssd2828.h" + +#ifdef CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW +#define PWM_ON 0 +#define PWM_OFF 1 +#else +#define PWM_ON 1 +#define PWM_OFF 0 +#endif DECLARE_GLOBAL_DATA_PTR; +enum sunxi_monitor { + sunxi_monitor_none, + sunxi_monitor_dvi, + sunxi_monitor_hdmi, + sunxi_monitor_lcd, + sunxi_monitor_vga, +}; +#define SUNXI_MONITOR_LAST sunxi_monitor_vga + struct sunxi_display { GraphicDevice graphic_device; - bool enabled; + enum sunxi_monitor monitor; + unsigned int depth; + unsigned int fb_size; } sunxi_display; -static int sunxi_hdmi_hpd_detect(void) +#ifdef CONFIG_VIDEO_HDMI + +/* + * Wait up to 200ms for value to be set in given part of reg. + */ +static int await_completion(u32 *reg, u32 mask, u32 val) +{ + unsigned long tmo = timer_get_us() + 200000; + + while ((readl(reg) & mask) != val) { + if (timer_get_us() > tmo) { + printf("DDC: timeout reading EDID\n"); + return -ETIME; + } + } + return 0; +} + +static int sunxi_hdmi_hpd_detect(int hpd_delay) { struct sunxi_ccm_reg * const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; struct sunxi_hdmi_reg * const hdmi = (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE; + unsigned long tmo = timer_get_us() + hpd_delay * 1000; /* Set pll3 to 300MHz */ clock_set_pll3(300000000); @@ -40,7 +84,7 @@ static int sunxi_hdmi_hpd_detect(void) CCM_HDMI_CTRL_PLL3); /* Set ahb gating to pass */ -#ifdef CONFIG_MACH_SUN6I +#ifdef CONFIG_SUNXI_GEN_SUN6I setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI); #endif setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_HDMI); @@ -51,23 +95,301 @@ static int sunxi_hdmi_hpd_detect(void) writel(SUNXI_HDMI_CTRL_ENABLE, &hdmi->ctrl); writel(SUNXI_HDMI_PAD_CTRL0_HDP, &hdmi->pad_ctrl0); - udelay(1000); + while (timer_get_us() < tmo) { + if (readl(&hdmi->hpd) & SUNXI_HDMI_HPD_DETECT) + return 1; + } - if (readl(&hdmi->hpd) & SUNXI_HDMI_HPD_DETECT) - return 1; + return 0; +} + +static void sunxi_hdmi_shutdown(void) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + struct sunxi_hdmi_reg * const hdmi = + (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE; - /* No need to keep these running */ clrbits_le32(&hdmi->ctrl, SUNXI_HDMI_CTRL_ENABLE); clrbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_GATE); clrbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_HDMI); -#ifdef CONFIG_MACH_SUN6I +#ifdef CONFIG_SUNXI_GEN_SUN6I clrbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI); #endif clock_set_pll3(0); +} + +static int sunxi_hdmi_ddc_do_command(u32 cmnd, int offset, int n) +{ + struct sunxi_hdmi_reg * const hdmi = + (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE; + + setbits_le32(&hdmi->ddc_fifo_ctrl, SUNXI_HDMI_DDC_FIFO_CTRL_CLEAR); + writel(SUNXI_HMDI_DDC_ADDR_EDDC_SEGMENT(offset >> 8) | + SUNXI_HMDI_DDC_ADDR_EDDC_ADDR | + SUNXI_HMDI_DDC_ADDR_OFFSET(offset) | + SUNXI_HMDI_DDC_ADDR_SLAVE_ADDR, &hdmi->ddc_addr); +#ifndef CONFIG_MACH_SUN6I + writel(n, &hdmi->ddc_byte_count); + writel(cmnd, &hdmi->ddc_cmnd); +#else + writel(n << 16 | cmnd, &hdmi->ddc_cmnd); +#endif + setbits_le32(&hdmi->ddc_ctrl, SUNXI_HMDI_DDC_CTRL_START); + + return await_completion(&hdmi->ddc_ctrl, SUNXI_HMDI_DDC_CTRL_START, 0); +} + +static int sunxi_hdmi_ddc_read(int offset, u8 *buf, int count) +{ + struct sunxi_hdmi_reg * const hdmi = + (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE; + int i, n; + + while (count > 0) { + if (count > 16) + n = 16; + else + n = count; + + if (sunxi_hdmi_ddc_do_command( + SUNXI_HDMI_DDC_CMND_EXPLICIT_EDDC_READ, + offset, n)) + return -ETIME; + + for (i = 0; i < n; i++) + *buf++ = readb(&hdmi->ddc_fifo_data); + + offset += n; + count -= n; + } + + return 0; +} + +static int sunxi_hdmi_edid_get_block(int block, u8 *buf) +{ + int r, retries = 2; + + do { + r = sunxi_hdmi_ddc_read(block * 128, buf, 128); + if (r) + continue; + r = edid_check_checksum(buf); + if (r) { + printf("EDID block %d: checksum error%s\n", + block, retries ? ", retrying" : ""); + } + } while (r && retries--); + + return r; +} + +static int sunxi_hdmi_edid_get_mode(struct ctfb_res_modes *mode) +{ + struct edid1_info edid1; + struct edid_cea861_info cea681[4]; + struct edid_detailed_timing *t = + (struct edid_detailed_timing *)edid1.monitor_details.timing; + struct sunxi_hdmi_reg * const hdmi = + (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE; + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + int i, r, ext_blocks = 0; + + /* SUNXI_HDMI_CTRL_ENABLE & PAD_CTRL0 are already set by hpd_detect */ + writel(SUNXI_HDMI_PAD_CTRL1 | SUNXI_HDMI_PAD_CTRL1_HALVE, + &hdmi->pad_ctrl1); + writel(SUNXI_HDMI_PLL_CTRL | SUNXI_HDMI_PLL_CTRL_DIV(15), + &hdmi->pll_ctrl); + writel(SUNXI_HDMI_PLL_DBG0_PLL3, &hdmi->pll_dbg0); + + /* Reset i2c controller */ + setbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_DDC_GATE); + writel(SUNXI_HMDI_DDC_CTRL_ENABLE | + SUNXI_HMDI_DDC_CTRL_SDA_ENABLE | + SUNXI_HMDI_DDC_CTRL_SCL_ENABLE | + SUNXI_HMDI_DDC_CTRL_RESET, &hdmi->ddc_ctrl); + if (await_completion(&hdmi->ddc_ctrl, SUNXI_HMDI_DDC_CTRL_RESET, 0)) + return -EIO; + + writel(SUNXI_HDMI_DDC_CLOCK, &hdmi->ddc_clock); +#ifndef CONFIG_MACH_SUN6I + writel(SUNXI_HMDI_DDC_LINE_CTRL_SDA_ENABLE | + SUNXI_HMDI_DDC_LINE_CTRL_SCL_ENABLE, &hdmi->ddc_line_ctrl); +#endif + + r = sunxi_hdmi_edid_get_block(0, (u8 *)&edid1); + if (r == 0) { + r = edid_check_info(&edid1); + if (r) { + printf("EDID: invalid EDID data\n"); + r = -EINVAL; + } + } + if (r == 0) { + ext_blocks = edid1.extension_flag; + if (ext_blocks > 4) + ext_blocks = 4; + for (i = 0; i < ext_blocks; i++) { + if (sunxi_hdmi_edid_get_block(1 + i, + (u8 *)&cea681[i]) != 0) { + ext_blocks = i; + break; + } + } + } + + /* Disable DDC engine, no longer needed */ + clrbits_le32(&hdmi->ddc_ctrl, SUNXI_HMDI_DDC_CTRL_ENABLE); + clrbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_DDC_GATE); + + if (r) + return r; + + /* We want version 1.3 or 1.2 with detailed timing info */ + if (edid1.version != 1 || (edid1.revision < 3 && + !EDID1_INFO_FEATURE_PREFERRED_TIMING_MODE(edid1))) { + printf("EDID: unsupported version %d.%d\n", + edid1.version, edid1.revision); + return -EINVAL; + } + + /* Take the first usable detailed timing */ + for (i = 0; i < 4; i++, t++) { + r = video_edid_dtd_to_ctfb_res_modes(t, mode); + if (r == 0) + break; + } + if (i == 4) { + printf("EDID: no usable detailed timing found\n"); + return -ENOENT; + } + + /* Check for basic audio support, if found enable hdmi output */ + sunxi_display.monitor = sunxi_monitor_dvi; + for (i = 0; i < ext_blocks; i++) { + if (cea681[i].extension_tag != EDID_CEA861_EXTENSION_TAG || + cea681[i].revision < 2) + continue; + + if (EDID_CEA861_SUPPORTS_BASIC_AUDIO(cea681[i])) + sunxi_display.monitor = sunxi_monitor_hdmi; + } return 0; } +#endif /* CONFIG_VIDEO_HDMI */ + +#ifdef CONFIG_MACH_SUN4I +/* + * Testing has shown that on sun4i the display backend engine does not have + * deep enough fifo-s causing flickering / tearing in full-hd mode due to + * fifo underruns. So on sun4i we use the display frontend engine to do the + * dma from memory, as the frontend does have deep enough fifo-s. + */ + +static const u32 sun4i_vert_coef[32] = { + 0x00004000, 0x000140ff, 0x00033ffe, 0x00043ffd, + 0x00063efc, 0xff083dfc, 0x000a3bfb, 0xff0d39fb, + 0xff0f37fb, 0xff1136fa, 0xfe1433fb, 0xfe1631fb, + 0xfd192ffb, 0xfd1c2cfb, 0xfd1f29fb, 0xfc2127fc, + 0xfc2424fc, 0xfc2721fc, 0xfb291ffd, 0xfb2c1cfd, + 0xfb2f19fd, 0xfb3116fe, 0xfb3314fe, 0xfa3611ff, + 0xfb370fff, 0xfb390dff, 0xfb3b0a00, 0xfc3d08ff, + 0xfc3e0600, 0xfd3f0400, 0xfe3f0300, 0xff400100, +}; + +static const u32 sun4i_horz_coef[64] = { + 0x40000000, 0x00000000, 0x40fe0000, 0x0000ff03, + 0x3ffd0000, 0x0000ff05, 0x3ffc0000, 0x0000ff06, + 0x3efb0000, 0x0000ff08, 0x3dfb0000, 0x0000ff09, + 0x3bfa0000, 0x0000fe0d, 0x39fa0000, 0x0000fe0f, + 0x38fa0000, 0x0000fe10, 0x36fa0000, 0x0000fe12, + 0x33fa0000, 0x0000fd16, 0x31fa0000, 0x0000fd18, + 0x2ffa0000, 0x0000fd1a, 0x2cfa0000, 0x0000fc1e, + 0x29fa0000, 0x0000fc21, 0x27fb0000, 0x0000fb23, + 0x24fb0000, 0x0000fb26, 0x21fb0000, 0x0000fb29, + 0x1ffc0000, 0x0000fa2b, 0x1cfc0000, 0x0000fa2e, + 0x19fd0000, 0x0000fa30, 0x16fd0000, 0x0000fa33, + 0x14fd0000, 0x0000fa35, 0x11fe0000, 0x0000fa37, + 0x0ffe0000, 0x0000fa39, 0x0dfe0000, 0x0000fa3b, + 0x0afe0000, 0x0000fa3e, 0x08ff0000, 0x0000fb3e, + 0x06ff0000, 0x0000fb40, 0x05ff0000, 0x0000fc40, + 0x03ff0000, 0x0000fd41, 0x01ff0000, 0x0000fe42, +}; + +static void sunxi_frontend_init(void) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + struct sunxi_de_fe_reg * const de_fe = + (struct sunxi_de_fe_reg *)SUNXI_DE_FE0_BASE; + int i; + + /* Clocks on */ + setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_DE_FE0); + setbits_le32(&ccm->dram_clk_gate, 1 << CCM_DRAM_GATE_OFFSET_DE_FE0); + clock_set_de_mod_clock(&ccm->fe0_clk_cfg, 300000000); + + setbits_le32(&de_fe->enable, SUNXI_DE_FE_ENABLE_EN); + + for (i = 0; i < 32; i++) { + writel(sun4i_horz_coef[2 * i], &de_fe->ch0_horzcoef0[i]); + writel(sun4i_horz_coef[2 * i + 1], &de_fe->ch0_horzcoef1[i]); + writel(sun4i_vert_coef[i], &de_fe->ch0_vertcoef[i]); + writel(sun4i_horz_coef[2 * i], &de_fe->ch1_horzcoef0[i]); + writel(sun4i_horz_coef[2 * i + 1], &de_fe->ch1_horzcoef1[i]); + writel(sun4i_vert_coef[i], &de_fe->ch1_vertcoef[i]); + } + + setbits_le32(&de_fe->frame_ctrl, SUNXI_DE_FE_FRAME_CTRL_COEF_RDY); +} + +static void sunxi_frontend_mode_set(const struct ctfb_res_modes *mode, + unsigned int address) +{ + struct sunxi_de_fe_reg * const de_fe = + (struct sunxi_de_fe_reg *)SUNXI_DE_FE0_BASE; + + setbits_le32(&de_fe->bypass, SUNXI_DE_FE_BYPASS_CSC_BYPASS); + writel(CONFIG_SYS_SDRAM_BASE + address, &de_fe->ch0_addr); + writel(mode->xres * 4, &de_fe->ch0_stride); + writel(SUNXI_DE_FE_INPUT_FMT_ARGB8888, &de_fe->input_fmt); + writel(SUNXI_DE_FE_OUTPUT_FMT_ARGB8888, &de_fe->output_fmt); + + writel(SUNXI_DE_FE_HEIGHT(mode->yres) | SUNXI_DE_FE_WIDTH(mode->xres), + &de_fe->ch0_insize); + writel(SUNXI_DE_FE_HEIGHT(mode->yres) | SUNXI_DE_FE_WIDTH(mode->xres), + &de_fe->ch0_outsize); + writel(SUNXI_DE_FE_FACTOR_INT(1), &de_fe->ch0_horzfact); + writel(SUNXI_DE_FE_FACTOR_INT(1), &de_fe->ch0_vertfact); + + writel(SUNXI_DE_FE_HEIGHT(mode->yres) | SUNXI_DE_FE_WIDTH(mode->xres), + &de_fe->ch1_insize); + writel(SUNXI_DE_FE_HEIGHT(mode->yres) | SUNXI_DE_FE_WIDTH(mode->xres), + &de_fe->ch1_outsize); + writel(SUNXI_DE_FE_FACTOR_INT(1), &de_fe->ch1_horzfact); + writel(SUNXI_DE_FE_FACTOR_INT(1), &de_fe->ch1_vertfact); + + setbits_le32(&de_fe->frame_ctrl, SUNXI_DE_FE_FRAME_CTRL_REG_RDY); +} + +static void sunxi_frontend_enable(void) +{ + struct sunxi_de_fe_reg * const de_fe = + (struct sunxi_de_fe_reg *)SUNXI_DE_FE0_BASE; + + setbits_le32(&de_fe->frame_ctrl, SUNXI_DE_FE_FRAME_CTRL_FRM_START); +} +#else +static void sunxi_frontend_init(void) {} +static void sunxi_frontend_mode_set(const struct ctfb_res_modes *mode, + unsigned int address) {} +static void sunxi_frontend_enable(void) {} +#endif + /* * This is the entity that mixes and matches the different layers and inputs. * Allwinner calls it the back-end, but i like composer better. @@ -80,14 +402,18 @@ static void sunxi_composer_init(void) (struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE; int i; -#ifdef CONFIG_MACH_SUN6I + sunxi_frontend_init(); + +#ifdef CONFIG_SUNXI_GEN_SUN6I /* Reset off */ setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_DE_BE0); #endif /* Clocks on */ setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_DE_BE0); +#ifndef CONFIG_MACH_SUN4I /* On sun4i the frontend does the dma */ setbits_le32(&ccm->dram_clk_gate, 1 << CCM_DRAM_GATE_OFFSET_DE_BE0); +#endif clock_set_de_mod_clock(&ccm->be0_clk_cfg, 300000000); /* Engine bug, clear registers after reset */ @@ -97,41 +423,72 @@ static void sunxi_composer_init(void) setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_ENABLE); } -static void sunxi_composer_mode_set(struct fb_videomode *mode, +static void sunxi_composer_mode_set(const struct ctfb_res_modes *mode, unsigned int address) { struct sunxi_de_be_reg * const de_be = (struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE; + sunxi_frontend_mode_set(mode, address); + writel(SUNXI_DE_BE_HEIGHT(mode->yres) | SUNXI_DE_BE_WIDTH(mode->xres), &de_be->disp_size); writel(SUNXI_DE_BE_HEIGHT(mode->yres) | SUNXI_DE_BE_WIDTH(mode->xres), &de_be->layer0_size); +#ifndef CONFIG_MACH_SUN4I /* On sun4i the frontend does the dma */ writel(SUNXI_DE_BE_LAYER_STRIDE(mode->xres), &de_be->layer0_stride); writel(address << 3, &de_be->layer0_addr_low32b); writel(address >> 29, &de_be->layer0_addr_high4b); +#else + writel(SUNXI_DE_BE_LAYER_ATTR0_SRC_FE0, &de_be->layer0_attr0_ctrl); +#endif writel(SUNXI_DE_BE_LAYER_ATTR1_FMT_XRGB8888, &de_be->layer0_attr1_ctrl); setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_LAYER0_ENABLE); } +static void sunxi_composer_enable(void) +{ + struct sunxi_de_be_reg * const de_be = + (struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE; + + sunxi_frontend_enable(); + + setbits_le32(&de_be->reg_ctrl, SUNXI_DE_BE_REG_CTRL_LOAD_REGS); + setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_START); +} + /* * LCDC, what allwinner calls a CRTC, so timing controller and serializer. */ -static void sunxi_lcdc_pll_set(int dotclock, int *clk_div, int *clk_double) +static void sunxi_lcdc_pll_set(int tcon, int dotclock, + int *clk_div, int *clk_double) { struct sunxi_ccm_reg * const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - int value, n, m, diff; + int value, n, m, min_m, max_m, diff; int best_n = 0, best_m = 0, best_diff = 0x0FFFFFFF; int best_double = 0; + if (tcon == 0) { +#ifdef CONFIG_VIDEO_LCD_IF_PARALLEL + min_m = 6; + max_m = 127; +#endif +#ifdef CONFIG_VIDEO_LCD_IF_LVDS + min_m = max_m = 7; +#endif + } else { + min_m = 1; + max_m = 15; + } + /* * Find the lowest divider resulting in a matching clock, if there * is no match, pick the closest lower clock, as monitors tend to * not sync to higher frequencies. */ - for (m = 15; m > 0; m--) { + for (m = min_m; m <= max_m; m++) { n = (m * dotclock) / 3000; if ((n >= 9) && (n <= 127)) { @@ -168,9 +525,17 @@ static void sunxi_lcdc_pll_set(int dotclock, int *clk_div, int *clk_double) clock_set_pll3(best_n * 3000000); - writel(CCM_LCD_CH1_CTRL_GATE | - (best_double ? CCM_LCD_CH1_CTRL_PLL3_2X : CCM_LCD_CH1_CTRL_PLL3) | - CCM_LCD_CH1_CTRL_M(best_m), &ccm->lcd0_ch1_clk_cfg); + if (tcon == 0) { + writel(CCM_LCD_CH0_CTRL_GATE | CCM_LCD_CH0_CTRL_RST | + (best_double ? CCM_LCD_CH0_CTRL_PLL3_2X : + CCM_LCD_CH0_CTRL_PLL3), + &ccm->lcd0_ch0_clk_cfg); + } else { + writel(CCM_LCD_CH1_CTRL_GATE | + (best_double ? CCM_LCD_CH1_CTRL_PLL3_2X : + CCM_LCD_CH1_CTRL_PLL3) | + CCM_LCD_CH1_CTRL_M(best_m), &ccm->lcd0_ch1_clk_cfg); + } *clk_div = best_m; *clk_double = best_double; @@ -184,7 +549,7 @@ static void sunxi_lcdc_init(void) (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE; /* Reset off */ -#ifdef CONFIG_MACH_SUN6I +#ifdef CONFIG_SUNXI_GEN_SUN6I setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_LCD0); #else setbits_le32(&ccm->lcd0_ch0_clk_cfg, CCM_LCD_CH0_CTRL_RST); @@ -192,6 +557,13 @@ static void sunxi_lcdc_init(void) /* Clock on */ setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_LCD0); +#ifdef CONFIG_VIDEO_LCD_IF_LVDS +#ifdef CONFIG_SUNXI_GEN_SUN6I + setbits_le32(&ccm->ahb_reset2_cfg, 1 << AHB_RESET_OFFSET_LVDS); +#else + setbits_le32(&ccm->lvds_clk_cfg, CCM_LVDS_CTRL_RST); +#endif +#endif /* Init lcdc */ writel(0, &lcdc->ctrl); /* Disable tcon */ @@ -205,20 +577,202 @@ static void sunxi_lcdc_init(void) writel(0xffffffff, &lcdc->tcon1_io_tristate); } -static void sunxi_lcdc_mode_set(struct fb_videomode *mode, - int *clk_div, int *clk_double) +static void sunxi_lcdc_enable(void) { struct sunxi_lcdc_reg * const lcdc = (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE; - int bp, total; + + setbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_TCON_ENABLE); +#ifdef CONFIG_VIDEO_LCD_IF_LVDS + setbits_le32(&lcdc->tcon0_lvds_intf, SUNXI_LCDC_TCON0_LVDS_INTF_ENABLE); + setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0); +#ifdef CONFIG_SUNXI_GEN_SUN6I + udelay(2); /* delay at least 1200 ns */ + setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0_EN_MB); + udelay(2); /* delay at least 1200 ns */ + setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0_DRVC); + if (sunxi_display.depth == 18) + setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0_DRVD(0x7)); + else + setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0_DRVD(0xf)); +#else + setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0_UPDATE); + udelay(2); /* delay at least 1200 ns */ + setbits_le32(&lcdc->lvds_ana1, SUNXI_LCDC_LVDS_ANA1_INIT1); + udelay(1); /* delay at least 120 ns */ + setbits_le32(&lcdc->lvds_ana1, SUNXI_LCDC_LVDS_ANA1_INIT2); + setbits_le32(&lcdc->lvds_ana0, SUNXI_LCDC_LVDS_ANA0_UPDATE); +#endif +#endif +} + +static void sunxi_lcdc_panel_enable(void) +{ + int pin, reset_pin; + + /* + * Start with backlight disabled to avoid the screen flashing to + * white while the lcd inits. + */ + pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_EN); + if (pin >= 0) { + gpio_request(pin, "lcd_backlight_enable"); + gpio_direction_output(pin, 0); + } + + pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_PWM); + if (pin >= 0) { + gpio_request(pin, "lcd_backlight_pwm"); + gpio_direction_output(pin, PWM_OFF); + } + + reset_pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_RESET); + if (reset_pin >= 0) { + gpio_request(reset_pin, "lcd_reset"); + gpio_direction_output(reset_pin, 0); /* Assert reset */ + } + + /* Give the backlight some time to turn off and power up the panel. */ + mdelay(40); + pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_POWER); + if (pin >= 0) { + gpio_request(pin, "lcd_power"); + gpio_direction_output(pin, 1); + } + + if (reset_pin >= 0) + gpio_direction_output(reset_pin, 1); /* De-assert reset */ +} + +static void sunxi_lcdc_backlight_enable(void) +{ + int pin; + + /* + * We want to have scanned out at least one frame before enabling the + * backlight to avoid the screen flashing to white when we enable it. + */ + mdelay(40); + + pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_EN); + if (pin >= 0) + gpio_direction_output(pin, 1); + + pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_PWM); + if (pin >= 0) + gpio_direction_output(pin, PWM_ON); +} + +static int sunxi_lcdc_get_clk_delay(const struct ctfb_res_modes *mode) +{ + int delay; + + delay = mode->lower_margin + mode->vsync_len + mode->upper_margin - 2; + return (delay > 30) ? 30 : delay; +} + +static void sunxi_lcdc_tcon0_mode_set(const struct ctfb_res_modes *mode, + bool for_ext_vga_dac) +{ + struct sunxi_lcdc_reg * const lcdc = + (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE; + int bp, clk_delay, clk_div, clk_double, pin, total, val; + + for (pin = SUNXI_GPD(0); pin <= SUNXI_GPD(27); pin++) +#ifdef CONFIG_VIDEO_LCD_IF_PARALLEL + sunxi_gpio_set_cfgpin(pin, SUNXI_GPD_LCD0); +#endif +#ifdef CONFIG_VIDEO_LCD_IF_LVDS + sunxi_gpio_set_cfgpin(pin, SUNXI_GPD_LVDS0); +#endif + + sunxi_lcdc_pll_set(0, mode->pixclock_khz, &clk_div, &clk_double); + + /* Use tcon0 */ + clrsetbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_IO_MAP_MASK, + SUNXI_LCDC_CTRL_IO_MAP_TCON0); + + clk_delay = sunxi_lcdc_get_clk_delay(mode); + writel(SUNXI_LCDC_TCON0_CTRL_ENABLE | + SUNXI_LCDC_TCON0_CTRL_CLK_DELAY(clk_delay), &lcdc->tcon0_ctrl); + + writel(SUNXI_LCDC_TCON0_DCLK_ENABLE | + SUNXI_LCDC_TCON0_DCLK_DIV(clk_div), &lcdc->tcon0_dclk); + + writel(SUNXI_LCDC_X(mode->xres) | SUNXI_LCDC_Y(mode->yres), + &lcdc->tcon0_timing_active); + + bp = mode->hsync_len + mode->left_margin; + total = mode->xres + mode->right_margin + bp; + writel(SUNXI_LCDC_TCON0_TIMING_H_TOTAL(total) | + SUNXI_LCDC_TCON0_TIMING_H_BP(bp), &lcdc->tcon0_timing_h); + + bp = mode->vsync_len + mode->upper_margin; + total = mode->yres + mode->lower_margin + bp; + writel(SUNXI_LCDC_TCON0_TIMING_V_TOTAL(total) | + SUNXI_LCDC_TCON0_TIMING_V_BP(bp), &lcdc->tcon0_timing_v); + +#ifdef CONFIG_VIDEO_LCD_IF_PARALLEL + writel(SUNXI_LCDC_X(mode->hsync_len) | SUNXI_LCDC_Y(mode->vsync_len), + &lcdc->tcon0_timing_sync); + + writel(0, &lcdc->tcon0_hv_intf); + writel(0, &lcdc->tcon0_cpu_intf); +#endif +#ifdef CONFIG_VIDEO_LCD_IF_LVDS + val = (sunxi_display.depth == 18) ? 1 : 0; + writel(SUNXI_LCDC_TCON0_LVDS_INTF_BITWIDTH(val) | + SUNXI_LCDC_TCON0_LVDS_CLK_SEL_TCON0, &lcdc->tcon0_lvds_intf); +#endif + + if (sunxi_display.depth == 18 || sunxi_display.depth == 16) { + writel(SUNXI_LCDC_TCON0_FRM_SEED, &lcdc->tcon0_frm_seed[0]); + writel(SUNXI_LCDC_TCON0_FRM_SEED, &lcdc->tcon0_frm_seed[1]); + writel(SUNXI_LCDC_TCON0_FRM_SEED, &lcdc->tcon0_frm_seed[2]); + writel(SUNXI_LCDC_TCON0_FRM_SEED, &lcdc->tcon0_frm_seed[3]); + writel(SUNXI_LCDC_TCON0_FRM_SEED, &lcdc->tcon0_frm_seed[4]); + writel(SUNXI_LCDC_TCON0_FRM_SEED, &lcdc->tcon0_frm_seed[5]); + writel(SUNXI_LCDC_TCON0_FRM_TAB0, &lcdc->tcon0_frm_table[0]); + writel(SUNXI_LCDC_TCON0_FRM_TAB1, &lcdc->tcon0_frm_table[1]); + writel(SUNXI_LCDC_TCON0_FRM_TAB2, &lcdc->tcon0_frm_table[2]); + writel(SUNXI_LCDC_TCON0_FRM_TAB3, &lcdc->tcon0_frm_table[3]); + writel(((sunxi_display.depth == 18) ? + SUNXI_LCDC_TCON0_FRM_CTRL_RGB666 : + SUNXI_LCDC_TCON0_FRM_CTRL_RGB565), + &lcdc->tcon0_frm_ctrl); + } + + val = SUNXI_LCDC_TCON0_IO_POL_DCLK_PHASE(CONFIG_VIDEO_LCD_DCLK_PHASE); + if (!(mode->sync & FB_SYNC_HOR_HIGH_ACT)) + val |= SUNXI_LCDC_TCON_HSYNC_MASK; + if (!(mode->sync & FB_SYNC_VERT_HIGH_ACT)) + val |= SUNXI_LCDC_TCON_VSYNC_MASK; + +#ifdef CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH + if (for_ext_vga_dac) + val = 0; +#endif + writel(val, &lcdc->tcon0_io_polarity); + + writel(0, &lcdc->tcon0_io_tristate); +} + +#if defined CONFIG_VIDEO_HDMI || defined CONFIG_VIDEO_VGA +static void sunxi_lcdc_tcon1_mode_set(const struct ctfb_res_modes *mode, + int *clk_div, int *clk_double, + bool use_portd_hvsync) +{ + struct sunxi_lcdc_reg * const lcdc = + (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE; + int bp, clk_delay, total, val; /* Use tcon1 */ clrsetbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_IO_MAP_MASK, SUNXI_LCDC_CTRL_IO_MAP_TCON1); - /* Enabled, 0x1e start delay */ + clk_delay = sunxi_lcdc_get_clk_delay(mode); writel(SUNXI_LCDC_TCON1_CTRL_ENABLE | - SUNXI_LCDC_TCON1_CTRL_CLK_DELAY(0x1e), &lcdc->tcon1_ctrl); + SUNXI_LCDC_TCON1_CTRL_CLK_DELAY(clk_delay), &lcdc->tcon1_ctrl); writel(SUNXI_LCDC_X(mode->xres) | SUNXI_LCDC_Y(mode->yres), &lcdc->tcon1_timing_source); @@ -240,22 +794,75 @@ static void sunxi_lcdc_mode_set(struct fb_videomode *mode, writel(SUNXI_LCDC_X(mode->hsync_len) | SUNXI_LCDC_Y(mode->vsync_len), &lcdc->tcon1_timing_sync); - sunxi_lcdc_pll_set(mode->pixclock, clk_div, clk_double); + if (use_portd_hvsync) { + sunxi_gpio_set_cfgpin(SUNXI_GPD(26), SUNXI_GPD_LCD0); + sunxi_gpio_set_cfgpin(SUNXI_GPD(27), SUNXI_GPD_LCD0); + + val = 0; + if (mode->sync & FB_SYNC_HOR_HIGH_ACT) + val |= SUNXI_LCDC_TCON_HSYNC_MASK; + if (mode->sync & FB_SYNC_VERT_HIGH_ACT) + val |= SUNXI_LCDC_TCON_VSYNC_MASK; + writel(val, &lcdc->tcon1_io_polarity); + + clrbits_le32(&lcdc->tcon1_io_tristate, + SUNXI_LCDC_TCON_VSYNC_MASK | + SUNXI_LCDC_TCON_HSYNC_MASK); + } + sunxi_lcdc_pll_set(1, mode->pixclock_khz, clk_div, clk_double); } +#endif /* CONFIG_VIDEO_HDMI || defined CONFIG_VIDEO_VGA */ -#ifdef CONFIG_MACH_SUN6I -static void sunxi_drc_init(void) +#ifdef CONFIG_VIDEO_HDMI + +static void sunxi_hdmi_setup_info_frames(const struct ctfb_res_modes *mode) { - struct sunxi_ccm_reg * const ccm = - (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + struct sunxi_hdmi_reg * const hdmi = + (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE; + u8 checksum = 0; + u8 avi_info_frame[17] = { + 0x82, 0x02, 0x0d, 0x00, 0x12, 0x00, 0x88, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00 + }; + u8 vendor_info_frame[19] = { + 0x81, 0x01, 0x06, 0x29, 0x03, 0x0c, 0x00, 0x40, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00 + }; + int i; - /* On sun6i the drc must be clocked even when in pass-through mode */ - setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_DRC0); - clock_set_de_mod_clock(&ccm->iep_drc0_clk_cfg, 300000000); + if (mode->pixclock_khz <= 27000) + avi_info_frame[5] = 0x40; /* SD-modes, ITU601 colorspace */ + else + avi_info_frame[5] = 0x80; /* HD-modes, ITU709 colorspace */ + + if (mode->xres * 100 / mode->yres < 156) + avi_info_frame[5] |= 0x18; /* 4 : 3 */ + else + avi_info_frame[5] |= 0x28; /* 16 : 9 */ + + for (i = 0; i < ARRAY_SIZE(avi_info_frame); i++) + checksum += avi_info_frame[i]; + + avi_info_frame[3] = 0x100 - checksum; + + for (i = 0; i < ARRAY_SIZE(avi_info_frame); i++) + writeb(avi_info_frame[i], &hdmi->avi_info_frame[i]); + + writel(SUNXI_HDMI_QCP_PACKET0, &hdmi->qcp_packet0); + writel(SUNXI_HDMI_QCP_PACKET1, &hdmi->qcp_packet1); + + for (i = 0; i < ARRAY_SIZE(vendor_info_frame); i++) + writeb(vendor_info_frame[i], &hdmi->vendor_info_frame[i]); + + writel(SUNXI_HDMI_PKT_CTRL0, &hdmi->pkt_ctrl0); + writel(SUNXI_HDMI_PKT_CTRL1, &hdmi->pkt_ctrl1); + + setbits_le32(&hdmi->video_ctrl, SUNXI_HDMI_VIDEO_CTRL_HDMI); } -#endif -static void sunxi_hdmi_mode_set(struct fb_videomode *mode, +static void sunxi_hdmi_mode_set(const struct ctfb_res_modes *mode, int clk_div, int clk_double) { struct sunxi_hdmi_reg * const hdmi = @@ -265,6 +872,12 @@ static void sunxi_hdmi_mode_set(struct fb_videomode *mode, /* Write clear interrupt status bits */ writel(SUNXI_HDMI_IRQ_STATUS_BITS, &hdmi->irq); + if (sunxi_display.monitor == sunxi_monitor_hdmi) + sunxi_hdmi_setup_info_frames(mode); + + /* Set input sync enable */ + writel(SUNXI_HDMI_UNKNOWN_INPUT_SYNC, &hdmi->unknown); + /* Init various registers, select pll3 as clock source */ writel(SUNXI_HDMI_VIDEO_POL_TX_CLK, &hdmi->video_polarity); writel(SUNXI_HDMI_PAD_CTRL0_RUN, &hdmi->pad_ctrl0); @@ -301,101 +914,311 @@ static void sunxi_hdmi_mode_set(struct fb_videomode *mode, setbits_le32(&hdmi->video_polarity, SUNXI_HDMI_VIDEO_POL_VER); } -static void sunxi_engines_init(void) +static void sunxi_hdmi_enable(void) { - sunxi_composer_init(); - sunxi_lcdc_init(); -#ifdef CONFIG_MACH_SUN6I - sunxi_drc_init(); -#endif + struct sunxi_hdmi_reg * const hdmi = + (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE; + + udelay(100); + setbits_le32(&hdmi->video_ctrl, SUNXI_HDMI_VIDEO_CTRL_ENABLE); } -static void sunxi_mode_set(struct fb_videomode *mode, unsigned int address) +#endif /* CONFIG_VIDEO_HDMI */ + +#ifdef CONFIG_VIDEO_VGA + +static void sunxi_vga_mode_set(void) { - struct sunxi_de_be_reg * const de_be = - (struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE; - struct sunxi_lcdc_reg * const lcdc = - (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE; - struct sunxi_hdmi_reg * const hdmi = - (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE; - int clk_div, clk_double; - int retries = 3; + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + struct sunxi_tve_reg * const tve = + (struct sunxi_tve_reg *)SUNXI_TVE0_BASE; -retry: - clrbits_le32(&hdmi->video_ctrl, SUNXI_HDMI_VIDEO_CTRL_ENABLE); - clrbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_TCON_ENABLE); - clrbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_START); + /* Clock on */ + setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_TVE0); + + /* Set TVE in VGA mode */ + writel(SUNXI_TVE_GCTRL_DAC_INPUT(0, 1) | + SUNXI_TVE_GCTRL_DAC_INPUT(1, 2) | + SUNXI_TVE_GCTRL_DAC_INPUT(2, 3), &tve->gctrl); + writel(SUNXI_TVE_GCTRL_CFG0_VGA, &tve->cfg0); + writel(SUNXI_TVE_GCTRL_DAC_CFG0_VGA, &tve->dac_cfg0); + writel(SUNXI_TVE_GCTRL_UNKNOWN1_VGA, &tve->unknown1); +} - sunxi_composer_mode_set(mode, address); - sunxi_lcdc_mode_set(mode, &clk_div, &clk_double); - sunxi_hdmi_mode_set(mode, clk_div, clk_double); +static void sunxi_vga_enable(void) +{ + struct sunxi_tve_reg * const tve = + (struct sunxi_tve_reg *)SUNXI_TVE0_BASE; - setbits_le32(&de_be->reg_ctrl, SUNXI_DE_BE_REG_CTRL_LOAD_REGS); - setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_START); + setbits_le32(&tve->gctrl, SUNXI_TVE_GCTRL_ENABLE); +} - udelay(1000000 / mode->refresh + 500); +#endif /* CONFIG_VIDEO_VGA */ - setbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_TCON_ENABLE); +static void sunxi_drc_init(void) +{ +#ifdef CONFIG_SUNXI_GEN_SUN6I + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - udelay(1000000 / mode->refresh + 500); + /* On sun6i the drc must be clocked even when in pass-through mode */ +#ifdef CONFIG_MACH_SUN8I_A33 + setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_SAT); +#endif + setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_DRC0); + clock_set_de_mod_clock(&ccm->iep_drc0_clk_cfg, 300000000); +#endif +} - setbits_le32(&hdmi->video_ctrl, SUNXI_HDMI_VIDEO_CTRL_ENABLE); +#ifdef CONFIG_VIDEO_VGA_VIA_LCD +static void sunxi_vga_external_dac_enable(void) +{ + int pin; - udelay(1000000 / mode->refresh + 500); + pin = sunxi_name_to_gpio(CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN); + if (pin >= 0) { + gpio_request(pin, "vga_enable"); + gpio_direction_output(pin, 1); + } +} +#endif /* CONFIG_VIDEO_VGA_VIA_LCD */ - /* - * Sometimes the display pipeline does not sync up properly, if - * this happens the hdmi fifo underrun or overrun bits are set. - */ - if (readl(&hdmi->irq) & - (SUNXI_HDMI_IRQ_STATUS_FIFO_UF | SUNXI_HDMI_IRQ_STATUS_FIFO_OF)) { - if (retries--) - goto retry; - printf("HDMI fifo under or overrun\n"); +#ifdef CONFIG_VIDEO_LCD_SSD2828 +static int sunxi_ssd2828_init(const struct ctfb_res_modes *mode) +{ + struct ssd2828_config cfg = { + .csx_pin = name_to_gpio(CONFIG_VIDEO_LCD_SPI_CS), + .sck_pin = name_to_gpio(CONFIG_VIDEO_LCD_SPI_SCLK), + .sdi_pin = name_to_gpio(CONFIG_VIDEO_LCD_SPI_MOSI), + .sdo_pin = name_to_gpio(CONFIG_VIDEO_LCD_SPI_MISO), + .reset_pin = name_to_gpio(CONFIG_VIDEO_LCD_SSD2828_RESET), + .ssd2828_tx_clk_khz = CONFIG_VIDEO_LCD_SSD2828_TX_CLK * 1000, + .ssd2828_color_depth = 24, +#ifdef CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828 + .mipi_dsi_number_of_data_lanes = 4, + .mipi_dsi_bitrate_per_data_lane_mbps = 513, + .mipi_dsi_delay_after_exit_sleep_mode_ms = 100, + .mipi_dsi_delay_after_set_display_on_ms = 200 +#else +#error MIPI LCD panel needs configuration parameters +#endif + }; + + if (cfg.csx_pin == -1 || cfg.sck_pin == -1 || cfg.sdi_pin == -1) { + printf("SSD2828: SPI pins are not properly configured\n"); + return 1; + } + if (cfg.reset_pin == -1) { + printf("SSD2828: Reset pin is not properly configured\n"); + return 1; + } + + return ssd2828_init(&cfg, mode); +} +#endif /* CONFIG_VIDEO_LCD_SSD2828 */ + +static void sunxi_engines_init(void) +{ + sunxi_composer_init(); + sunxi_lcdc_init(); + sunxi_drc_init(); +} + +static void sunxi_mode_set(const struct ctfb_res_modes *mode, + unsigned int address) +{ + int __maybe_unused clk_div, clk_double; + + switch (sunxi_display.monitor) { + case sunxi_monitor_none: + break; + case sunxi_monitor_dvi: + case sunxi_monitor_hdmi: +#ifdef CONFIG_VIDEO_HDMI + sunxi_composer_mode_set(mode, address); + sunxi_lcdc_tcon1_mode_set(mode, &clk_div, &clk_double, 0); + sunxi_hdmi_mode_set(mode, clk_div, clk_double); + sunxi_composer_enable(); + sunxi_lcdc_enable(); + sunxi_hdmi_enable(); +#endif + break; + case sunxi_monitor_lcd: + sunxi_lcdc_panel_enable(); + if (IS_ENABLED(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM)) { + mdelay(50); /* Wait for lcd controller power on */ + hitachi_tx18d42vm_init(); + } + if (IS_ENABLED(CONFIG_VIDEO_LCD_TL059WV5C0)) { + unsigned int orig_i2c_bus = i2c_get_bus_num(); + i2c_set_bus_num(CONFIG_VIDEO_LCD_I2C_BUS); + i2c_reg_write(0x5c, 0x04, 0x42); /* Turn on the LCD */ + i2c_set_bus_num(orig_i2c_bus); + } + sunxi_composer_mode_set(mode, address); + sunxi_lcdc_tcon0_mode_set(mode, false); + sunxi_composer_enable(); + sunxi_lcdc_enable(); +#ifdef CONFIG_VIDEO_LCD_SSD2828 + sunxi_ssd2828_init(mode); +#endif + sunxi_lcdc_backlight_enable(); + break; + case sunxi_monitor_vga: +#ifdef CONFIG_VIDEO_VGA + sunxi_composer_mode_set(mode, address); + sunxi_lcdc_tcon1_mode_set(mode, &clk_div, &clk_double, 1); + sunxi_vga_mode_set(); + sunxi_composer_enable(); + sunxi_lcdc_enable(); + sunxi_vga_enable(); +#elif defined CONFIG_VIDEO_VGA_VIA_LCD + sunxi_composer_mode_set(mode, address); + sunxi_lcdc_tcon0_mode_set(mode, true); + sunxi_composer_enable(); + sunxi_lcdc_enable(); + sunxi_vga_external_dac_enable(); +#endif + break; + } +} + +static const char *sunxi_get_mon_desc(enum sunxi_monitor monitor) +{ + switch (monitor) { + case sunxi_monitor_none: return "none"; + case sunxi_monitor_dvi: return "dvi"; + case sunxi_monitor_hdmi: return "hdmi"; + case sunxi_monitor_lcd: return "lcd"; + case sunxi_monitor_vga: return "vga"; } + return NULL; /* never reached */ +} + +ulong board_get_usable_ram_top(ulong total_size) +{ + return gd->ram_top - CONFIG_SUNXI_MAX_FB_SIZE; } void *video_hw_init(void) { static GraphicDevice *graphic_device = &sunxi_display.graphic_device; - /* - * Vesa standard 1024x768@60 - * 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync - */ - struct fb_videomode mode = { - .name = "1024x768", - .refresh = 60, - .xres = 1024, - .yres = 768, - .pixclock = 65000, - .left_margin = 160, - .right_margin = 24, - .upper_margin = 29, - .lower_margin = 3, - .hsync_len = 136, - .vsync_len = 6, - .sync = 0, - .vmode = 0, - .flag = 0, - }; - int ret; + const struct ctfb_res_modes *mode; + struct ctfb_res_modes custom; + const char *options; +#ifdef CONFIG_VIDEO_HDMI + int ret, hpd, hpd_delay, edid; +#endif + char mon[16]; + char *lcd_mode = CONFIG_VIDEO_LCD_MODE; + int i; memset(&sunxi_display, 0, sizeof(struct sunxi_display)); - printf("Reserved %dkB of RAM for Framebuffer.\n", - CONFIG_SUNXI_FB_SIZE >> 10); - gd->fb_base = gd->ram_top; + video_get_ctfb_res_modes(RES_MODE_1024x768, 24, &mode, + &sunxi_display.depth, &options); +#ifdef CONFIG_VIDEO_HDMI + hpd = video_get_option_int(options, "hpd", 1); + hpd_delay = video_get_option_int(options, "hpd_delay", 500); + edid = video_get_option_int(options, "edid", 1); + sunxi_display.monitor = sunxi_monitor_dvi; +#elif defined CONFIG_VIDEO_VGA_VIA_LCD + sunxi_display.monitor = sunxi_monitor_vga; +#else + sunxi_display.monitor = sunxi_monitor_lcd; +#endif + video_get_option_string(options, "monitor", mon, sizeof(mon), + sunxi_get_mon_desc(sunxi_display.monitor)); + for (i = 0; i <= SUNXI_MONITOR_LAST; i++) { + if (strcmp(mon, sunxi_get_mon_desc(i)) == 0) { + sunxi_display.monitor = i; + break; + } + } + if (i > SUNXI_MONITOR_LAST) + printf("Unknown monitor: '%s', falling back to '%s'\n", + mon, sunxi_get_mon_desc(sunxi_display.monitor)); + +#ifdef CONFIG_VIDEO_HDMI + /* If HDMI/DVI is selected do HPD & EDID, and handle fallback */ + if (sunxi_display.monitor == sunxi_monitor_dvi || + sunxi_display.monitor == sunxi_monitor_hdmi) { + /* Always call hdp_detect, as it also enables clocks, etc. */ + ret = sunxi_hdmi_hpd_detect(hpd_delay); + if (ret) { + printf("HDMI connected: "); + if (edid && sunxi_hdmi_edid_get_mode(&custom) == 0) + mode = &custom; + } else if (hpd) { + sunxi_hdmi_shutdown(); + /* Fallback to lcd / vga / none */ + if (lcd_mode[0]) { + sunxi_display.monitor = sunxi_monitor_lcd; + } else { +#if defined CONFIG_VIDEO_VGA_VIA_LCD || defined CONFIG_VIDEO_VGA + sunxi_display.monitor = sunxi_monitor_vga; +#else + sunxi_display.monitor = sunxi_monitor_none; +#endif + } + } /* else continue with hdmi/dvi without a cable connected */ + } +#endif - ret = sunxi_hdmi_hpd_detect(); - if (!ret) + switch (sunxi_display.monitor) { + case sunxi_monitor_none: return NULL; + case sunxi_monitor_dvi: + case sunxi_monitor_hdmi: +#ifdef CONFIG_VIDEO_HDMI + break; +#else + printf("HDMI/DVI not supported on this board\n"); + sunxi_display.monitor = sunxi_monitor_none; + return NULL; +#endif + case sunxi_monitor_lcd: + if (lcd_mode[0]) { + sunxi_display.depth = video_get_params(&custom, lcd_mode); + mode = &custom; + break; + } + printf("LCD not supported on this board\n"); + sunxi_display.monitor = sunxi_monitor_none; + return NULL; + case sunxi_monitor_vga: +#if defined CONFIG_VIDEO_VGA_VIA_LCD || defined CONFIG_VIDEO_VGA + sunxi_display.depth = 18; + break; +#else + printf("VGA not supported on this board\n"); + sunxi_display.monitor = sunxi_monitor_none; + return NULL; +#endif + } - printf("HDMI connected.\n"); - sunxi_display.enabled = true; + if (mode->vmode != FB_VMODE_NONINTERLACED) { + printf("Only non-interlaced modes supported, falling back to 1024x768\n"); + mode = &res_mode_init[RES_MODE_1024x768]; + } else { + printf("Setting up a %dx%d %s console\n", mode->xres, + mode->yres, sunxi_get_mon_desc(sunxi_display.monitor)); + } + + sunxi_display.fb_size = + (mode->xres * mode->yres * 4 + 0xfff) & ~0xfff; + if (sunxi_display.fb_size > CONFIG_SUNXI_MAX_FB_SIZE) { + printf("Error need %dkB for fb, but only %dkB is reserved\n", + sunxi_display.fb_size >> 10, + CONFIG_SUNXI_MAX_FB_SIZE >> 10); + return NULL; + } - printf("Setting up a %s console.\n", mode.name); + gd->fb_base = gd->bd->bi_dram[0].start + + gd->bd->bi_dram[0].size - sunxi_display.fb_size; sunxi_engines_init(); - sunxi_mode_set(&mode, gd->fb_base - CONFIG_SYS_SDRAM_BASE); + sunxi_mode_set(mode, gd->fb_base - CONFIG_SYS_SDRAM_BASE); /* * These are the only members of this structure that are used. All the @@ -405,8 +1228,8 @@ void *video_hw_init(void) graphic_device->frameAdrs = gd->fb_base; graphic_device->gdfIndex = GDF_32BIT_X888RGB; graphic_device->gdfBytesPP = 4; - graphic_device->winSizeX = mode.xres; - graphic_device->winSizeY = mode.yres; + graphic_device->winSizeX = mode->xres; + graphic_device->winSizeY = mode->yres; return graphic_device; } @@ -419,16 +1242,40 @@ int sunxi_simplefb_setup(void *blob) { static GraphicDevice *graphic_device = &sunxi_display.graphic_device; int offset, ret; + u64 start, size; + const char *pipeline = NULL; - if (!sunxi_display.enabled) +#ifdef CONFIG_MACH_SUN4I +#define PIPELINE_PREFIX "de_fe0-" +#else +#define PIPELINE_PREFIX +#endif + + switch (sunxi_display.monitor) { + case sunxi_monitor_none: return 0; + case sunxi_monitor_dvi: + case sunxi_monitor_hdmi: + pipeline = PIPELINE_PREFIX "de_be0-lcd0-hdmi"; + break; + case sunxi_monitor_lcd: + pipeline = PIPELINE_PREFIX "de_be0-lcd0"; + break; + case sunxi_monitor_vga: +#ifdef CONFIG_VIDEO_VGA + pipeline = PIPELINE_PREFIX "de_be0-lcd0-tve0"; +#elif defined CONFIG_VIDEO_VGA_VIA_LCD + pipeline = PIPELINE_PREFIX "de_be0-lcd0"; +#endif + break; + } - /* Find a framebuffer node, with pipeline == "de_be0-lcd0-hdmi" */ + /* Find a prefilled simpefb node, matching out pipeline config */ offset = fdt_node_offset_by_compatible(blob, -1, "allwinner,simple-framebuffer"); while (offset >= 0) { ret = fdt_find_string(blob, offset, "allwinner,pipeline", - "de_be0-lcd0-hdmi"); + pipeline); if (ret == 0) break; offset = fdt_node_offset_by_compatible(blob, offset, @@ -439,6 +1286,20 @@ int sunxi_simplefb_setup(void *blob) return 0; /* Keep older kernels working */ } + /* + * Do not report the framebuffer as free RAM to the OS, note we cannot + * use fdt_add_mem_rsv() here, because then it is still seen as RAM, + * and e.g. Linux refuses to iomap RAM on ARM, see: + * linux/arch/arm/mm/ioremap.c around line 301. + */ + start = gd->bd->bi_dram[0].start; + size = gd->bd->bi_dram[0].size - sunxi_display.fb_size; + ret = fdt_fixup_memory_banks(blob, &start, &size, 1); + if (ret) { + eprintf("Cannot setup simplefb: Error reserving memory\n"); + return ret; + } + ret = fdt_setup_simplefb_node(blob, offset, gd->fb_base, graphic_device->winSizeX, graphic_device->winSizeY, graphic_device->winSizeX * graphic_device->gdfBytesPP,