X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;ds=sidebyside;f=drivers%2Fnet%2Ffec_mxc.c;h=3340dd256f6ed1db06f876305092eb9447a6cf1b;hb=a5d801130cc9f4fc1cf2b710ac7560759b2e1c95;hp=b57247032fa85aaa65ec47c9fcf7668a4cd567df;hpb=84a6df09c78bc9e9cbc6265d99c9097f5f1079f2;p=oweals%2Fu-boot.git

diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index b57247032f..3340dd256f 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -10,6 +10,7 @@
 
 #include <common.h>
 #include <malloc.h>
+#include <memalign.h>
 #include <net.h>
 #include <netdev.h>
 #include <miiphy.h>
@@ -17,6 +18,7 @@
 
 #include <asm/arch/clock.h>
 #include <asm/arch/imx-regs.h>
+#include <asm/imx-common/sys_proto.h>
 #include <asm/io.h>
 #include <asm/errno.h>
 #include <linux/compiler.h>
@@ -67,13 +69,6 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #undef DEBUG
 
-struct nbuf {
-	uint8_t data[1500];	/**< actual data */
-	int length;		/**< actual length */
-	int used;		/**< buffer in use or not */
-	uint8_t head[16];	/**< MAC header(6 + 6 + 2) + 2(aligned) */
-};
-
 #ifdef CONFIG_FEC_MXC_SWAP_PACKET
 static void swap_packet(uint32_t *packet, int length)
 {
@@ -136,13 +131,25 @@ static void fec_mii_setspeed(struct ethernet_regs *eth)
 	/*
 	 * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
 	 * and do not drop the Preamble.
+	 *
+	 * The i.MX28 and i.MX6 types have another field in the MSCR (aka
+	 * MII_SPEED) register that defines the MDIO output hold time. Earlier
+	 * versions are RAZ there, so just ignore the difference and write the
+	 * register always.
+	 * The minimal hold time according to IEE802.3 (clause 22) is 10 ns.
+	 * HOLDTIME + 1 is the number of clk cycles the fec is holding the
+	 * output.
+	 * The HOLDTIME bitfield takes values between 0 and 7 (inclusive).
+	 * Given that ceil(clkrate / 5000000) <= 64, the calculation for
+	 * holdtime cannot result in a value greater than 3.
 	 */
-	register u32 speed = DIV_ROUND_UP(imx_get_fecclk(), 5000000);
+	u32 pclk = imx_get_fecclk();
+	u32 speed = DIV_ROUND_UP(pclk, 5000000);
+	u32 hold = DIV_ROUND_UP(pclk, 100000000) - 1;
 #ifdef FEC_QUIRK_ENET_MAC
 	speed--;
 #endif
-	speed <<= 1;
-	writel(speed, &eth->mii_speed);
+	writel(speed << 1 | hold << 8, &eth->mii_speed);
 	debug("%s: mii_speed %08x\n", __func__, readl(&eth->mii_speed));
 }
 
@@ -357,7 +364,7 @@ static int fec_get_hwaddr(struct eth_device *dev, int dev_id,
 						unsigned char *mac)
 {
 	imx_get_mac_from_fuse(dev_id, mac);
-	return !is_valid_ether_addr(mac);
+	return !is_valid_ethaddr(mac);
 }
 
 static int fec_set_hwaddr(struct eth_device *dev)
@@ -558,12 +565,15 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
 	writel(0x00000000, &fec->eth->gaddr2);
 
 
-	/* clear MIB RAM */
-	for (i = mib_ptr; i <= mib_ptr + 0xfc; i += 4)
-		writel(0, i);
+	/* Do not access reserved register for i.MX6UL */
+	if (!is_cpu_type(MXC_CPU_MX6UL)) {
+		/* clear MIB RAM */
+		for (i = mib_ptr; i <= mib_ptr + 0xfc; i += 4)
+			writel(0, i);
 
-	/* FIFO receive start register */
-	writel(0x520, &fec->eth->r_fstart);
+		/* FIFO receive start register */
+		writel(0x520, &fec->eth->r_fstart);
+	}
 
 	/* size and address of each buffer */
 	writel(FEC_MAX_PKT_SIZE, &fec->eth->emrbr);
@@ -775,7 +785,6 @@ static int fec_recv(struct eth_device *dev)
 	struct fec_bd *rbd = &fec->rbd_base[fec->rbd_index];
 	unsigned long ievent;
 	int frame_length, len = 0;
-	struct nbuf *frame;
 	uint16_t bd_status;
 	uint32_t addr, size, end;
 	int i;
@@ -835,12 +844,11 @@ static int fec_recv(struct eth_device *dev)
 			/*
 			 * Get buffer address and size
 			 */
-			frame = (struct nbuf *)readl(&rbd->data_pointer);
+			addr = readl(&rbd->data_pointer);
 			frame_length = readw(&rbd->data_length) - 4;
 			/*
 			 * Invalidate data cache over the buffer
 			 */
-			addr = (uint32_t)frame;
 			end = roundup(addr + frame_length, ARCH_DMA_MINALIGN);
 			addr &= ~(ARCH_DMA_MINALIGN - 1);
 			invalidate_dcache_range(addr, end);
@@ -849,16 +857,15 @@ static int fec_recv(struct eth_device *dev)
 			 *  Fill the buffer and pass it to upper layers
 			 */
 #ifdef CONFIG_FEC_MXC_SWAP_PACKET
-			swap_packet((uint32_t *)frame->data, frame_length);
+			swap_packet((uint32_t *)addr, frame_length);
 #endif
-			memcpy(buff, frame->data, frame_length);
-			NetReceive(buff, frame_length);
+			memcpy(buff, (char *)addr, frame_length);
+			net_process_received_packet(buff, frame_length);
 			len = frame_length;
 		} else {
 			if (bd_status & FEC_RBD_ERR)
-				printf("error frame: 0x%08lx 0x%08x\n",
-						(ulong)rbd->data_pointer,
-						bd_status);
+				printf("error frame: 0x%08x 0x%08x\n",
+				       addr, bd_status);
 		}
 
 		/*
@@ -1102,6 +1109,7 @@ int fecmxc_initialize_multi(bd_t *bd, int dev_id, int phy_id, uint32_t addr)
 #ifdef CONFIG_PHYLIB
 	phydev = phy_find_by_mask(bus, 1 << phy_id, PHY_INTERFACE_MODE_RGMII);
 	if (!phydev) {
+		mdio_unregister(bus);
 		free(bus);
 		return -ENOMEM;
 	}
@@ -1113,6 +1121,7 @@ int fecmxc_initialize_multi(bd_t *bd, int dev_id, int phy_id, uint32_t addr)
 #ifdef CONFIG_PHYLIB
 		free(phydev);
 #endif
+		mdio_unregister(bus);
 		free(bus);
 	}
 	return ret;