X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;ds=sidebyside;f=board%2Femk%2Ftop5200%2Ftop5200.c;h=8eaf7cbde3071036a063f68758f2b508173b36ae;hb=1a929f7ceb962dc691d0bf03c5c2b52d94dd3878;hp=12acc57171beb830b050e3569259d3fa86931906;hpb=83dc830b1693252d996bda920cd5f3161d7c64a9;p=oweals%2Fu-boot.git

diff --git a/board/emk/top5200/top5200.c b/board/emk/top5200/top5200.c
index 12acc57171..8eaf7cbde3 100644
--- a/board/emk/top5200/top5200.c
+++ b/board/emk/top5200/top5200.c
@@ -5,23 +5,7 @@
  * (C) Copyright 2003
  * Reinhard Meyer, EMK Elektronik GmbH, r.meyer@emk-elektronik.de
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #include <common.h>
@@ -32,10 +16,10 @@
  * initialize SDRAM/DDRAM controller.
  * TBD: get data from I2C EEPROM
  *****************************************************************************/
-long int initdram (int board_type)
+phys_size_t initdram (int board_type)
 {
 	ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 #if 0
 	ulong	t;
 	ulong	tap_del;
@@ -46,33 +30,33 @@ long int initdram (int board_type)
 	#define	SOFT_REF	4
 
 	/* configure SDRAM start/end */
-	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = (CFG_SDRAM_BASE & 0xFFF00000) | CFG_DRAM_RAM_SIZE;
+	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = (CONFIG_SYS_SDRAM_BASE & 0xFFF00000) | CONFIG_SYS_DRAM_RAM_SIZE;
 	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;	/* disabled */
 
 	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = CFG_DRAM_CONFIG1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = CFG_DRAM_CONFIG2;
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = CONFIG_SYS_DRAM_CONFIG1;
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = CONFIG_SYS_DRAM_CONFIG2;
 
 	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN;
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = CONFIG_SYS_DRAM_CONTROL | MODE_EN;
 	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_PRE;
-#ifdef CFG_DRAM_DDR
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = CONFIG_SYS_DRAM_CONTROL | MODE_EN | SOFT_PRE;
+#ifdef CONFIG_SYS_DRAM_DDR
 	/* set extended mode register */
-	*(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_EMODE;
+	*(vu_short *)MPC5XXX_SDRAM_MODE = CONFIG_SYS_DRAM_EMODE;
 #endif
 	/* set mode register */
-	*(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_MODE | 0x0400;
+	*(vu_short *)MPC5XXX_SDRAM_MODE = CONFIG_SYS_DRAM_MODE | 0x0400;
 	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_PRE;
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = CONFIG_SYS_DRAM_CONTROL | MODE_EN | SOFT_PRE;
 	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_REF;
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = CONFIG_SYS_DRAM_CONTROL | MODE_EN | SOFT_REF;
 	/* set mode register */
-	*(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_MODE;
+	*(vu_short *)MPC5XXX_SDRAM_MODE = CONFIG_SYS_DRAM_MODE;
 	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL;
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = CONFIG_SYS_DRAM_CONTROL;
 	/* write default TAP delay */
-	*(vu_long *)MPC5XXX_CDM_PORCFG = CFG_DRAM_TAP_DEL << 24;
+	*(vu_long *)MPC5XXX_CDM_PORCFG = CONFIG_SYS_DRAM_TAP_DEL << 24;
 
 #if 0
 	for (tap_del = 0; tap_del < 32; tap_del++)
@@ -97,7 +81,7 @@ long int initdram (int board_type)
 		}
 	}
 #endif
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	dramsize = ((1 << (*(vu_long *)MPC5XXX_SDRAM_CS0CFG - 0x13)) << 20);
 
@@ -184,13 +168,13 @@ void pci_init_board(void)
 /*****************************************************************************
  * provide the IDE Reset Function
  *****************************************************************************/
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
 
 void init_ide_reset (void)
 {
 	debug ("init_ide_reset\n");
 
-    	/* Configure PSC1_4 as GPIO output for ATA reset */
+	/* Configure PSC1_4 as GPIO output for ATA reset */
 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
 	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC1_4;
 }
@@ -205,4 +189,4 @@ void ide_set_reset (int idereset)
 		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
 	}
 }
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif