X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;ds=sidebyside;f=arch%2Farm%2Fdts%2Fsocfpga_cyclone5_socdk.dts;h=6f138b2b26163ada37d0c1cb0462ed70d44a4b4e;hb=bdac5e18a80427e1f44413dce78aefece956ffc2;hp=9eb5a2209c63b721ec5bc7fd773572703ef368be;hpb=ade766acfb27b1cfe175cd83f22db80dc5b5d789;p=oweals%2Fu-boot.git

diff --git a/arch/arm/dts/socfpga_cyclone5_socdk.dts b/arch/arm/dts/socfpga_cyclone5_socdk.dts
index 9eb5a2209c..6f138b2b26 100644
--- a/arch/arm/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/dts/socfpga_cyclone5_socdk.dts
@@ -1,20 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
- *  Copyright (C) 2012 Altera Corporation <www.altera.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
  */
 
 #include "socfpga_cyclone5.dtsi"
 
 / {
 	model = "Altera SOCFPGA Cyclone V SoC Development Kit";
-	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+	compatible = "altr,socfpga-cyclone5-socdk", "altr,socfpga-cyclone5", "altr,socfpga";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		name = "memory";
 		device_type = "memory";
 		reg = <0x0 0x40000000>; /* 1GB */
@@ -27,6 +27,29 @@
 		ethernet0 = &gmac1;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		hps0 {
+			label = "hps_led0";
+			gpios = <&portb 15 1>;
+		};
+
+		hps1 {
+			label = "hps_led1";
+			gpios = <&portb 14 1>;
+		};
+
+		hps2 {
+			label = "hps_led2";
+			gpios = <&portb 13 1>;
+		};
+
+		hps3 {
+			label = "hps_led3";
+			gpios = <&portb 12 1>;
+		};
+	};
+
 	regulator_3_3v: 3-3-v-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
@@ -35,6 +58,10 @@
 	};
 };
 
+&can0 {
+	status = "okay";
+};
+
 &gmac1 {
 	status = "okay";
 	phy-mode = "rgmii";
@@ -49,12 +76,28 @@
 	rxc-skew-ps = <2000>;
 };
 
+&gpio0 {
+	status = "okay";
+};
+
 &gpio1 {
 	status = "okay";
 };
 
+&gpio2 {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
+	clock-frequency = <100000>;
+
+	/*
+	 * adjust the falling times to decrease the i2c frequency to 50Khz
+	 * because the LCD module does not work at the standard 100Khz
+	 */
+	i2c-sda-falling-time-ns = <5000>;
+	i2c-scl-falling-time-ns = <5000>;
 
 	eeprom@51 {
 		compatible = "atmel,24c32";
@@ -69,15 +112,9 @@
 };
 
 &mmc0 {
-	status = "okay";
-	u-boot,dm-pre-reloc;
-
 	cd-gpios = <&portb 18 0>;
 	vmmc-supply = <&regulator_3_3v>;
 	vqmmc-supply = <&regulator_3_3v>;
-};
-
-&usb1 {
 	status = "okay";
 };
 
@@ -88,15 +125,42 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "n25q00";
-		reg = <0>;      /* chip select */
+		reg = <0>;	/* chip select */
 		spi-max-frequency = <100000000>;
+
 		m25p,fast-read;
-		page-size = <256>;
-		block-size = <16>; /* 2^16, 64KB */
-		read-delay = <4>;  /* delay value in read data capture register */
-		tshsl-ns = <50>;
-		tsd2d-ns = <50>;
-		tchsh-ns = <4>;
-		tslch-ns = <4>;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@qspi-boot {
+			/* 8MB for raw data. */
+			label = "Flash 0 Raw Data";
+			reg = <0x0 0x800000>;
+		};
+
+		partition@qspi-rootfs {
+			/* 120MB for jffs2 data. */
+			label = "Flash 0 jffs2 Filesystem";
+			reg = <0x800000 0x7800000>;
+		};
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spidev@0 {
+		compatible = "rohm,dh2228fv";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&usb1 {
+	status = "okay";
+};