X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;ds=sidebyside;f=README;h=7a4f34282750f3e3f425065407067668c541b80c;hb=a8c402f45c758235916615757ac537db8e96fc31;hp=ca07f7a3f9109e9139fd6ec4a2513bc6befe262c;hpb=1c7b5d0309c1da3952b1236d42c82c5ea8446476;p=oweals%2Fu-boot.git

diff --git a/README b/README
index ca07f7a3f9..7a4f342827 100644
--- a/README
+++ b/README
@@ -1028,21 +1028,6 @@ The following options need to be configured:
 			control registers. This behavior won't affect the
 			correctnessof 10/100 link speed update.
 
-		CONFIG_SMC911X
-		Support for SMSC's LAN911x and LAN921x chips
-
-			CONFIG_SMC911X_BASE
-			Define this to hold the physical address
-			of the device (I/O space)
-
-			CONFIG_SMC911X_32_BIT
-			Define this if data bus is 32 bits
-
-			CONFIG_SMC911X_16_BIT
-			Define this if data bus is 16 bits. If your processor
-			automatically converts one 32 bit word to two 16 bit
-			words you may also try CONFIG_SMC911X_32_BIT.
-
 		CONFIG_SH_ETHER
 		Support for Renesas on-chip Ethernet controller
 
@@ -2312,13 +2297,6 @@ The following options need to be configured:
 		this is instead controlled by the value of
 		/config/load-environment.
 
-- DataFlash Support:
-		CONFIG_HAS_DATAFLASH
-
-		Defining this option enables DataFlash features and
-		allows to read/write in Dataflash via the standard
-		commands cp, md...
-
 - Serial Flash support
 		Usage requires an initial 'sf probe' to define the serial
 		flash parameters, followed by read/write/erase/update
@@ -5174,7 +5152,7 @@ may be rejected, even when they contain important and valuable stuff.
 Please see http://www.denx.de/wiki/U-Boot/Patches for details.
 
 Patches shall be sent to the u-boot mailing list <u-boot@lists.denx.de>;
-see http://lists.denx.de/mailman/listinfo/u-boot
+see https://lists.denx.de/listinfo/u-boot
 
 When you send a patch, please include the following information with
 it: