X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;ds=sidebyside;f=README;h=0d6eac95f37f3a15acda1ad7a10a4b17fb3947ec;hb=45eeb8983c3eca0e82178897c027a34a52295a0f;hp=efd46933066d7963ab72ad571b26a4422a8f5627;hpb=1f4bb37d6bcae59b18a2438f3cdca6545a831ab5;p=oweals%2Fu-boot.git diff --git a/README b/README index efd4693306..0d6eac95f3 100644 --- a/README +++ b/README @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 - 2002 +# (C) Copyright 2000 - 2004 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -119,123 +119,48 @@ U-Boot will always have a patchlevel of "0". Directory Hierarchy: ==================== -- board Board dependend files -- common Misc architecture independend functions +- board Board dependent files +- common Misc architecture independent functions - cpu CPU specific files + - 74xx_7xx Files specific to Motorola MPC74xx and 7xx CPUs + - arm720t Files specific to ARM 720 CPUs + - arm920t Files specific to ARM 920 CPUs + - arm925t Files specific to ARM 925 CPUs + - arm926ejs Files specific to ARM 926 CPUs + - at91rm9200 Files specific to Atmel AT91RM9200 CPUs + - i386 Files specific to i386 CPUs + - ixp Files specific to Intel XScale IXP CPUs + - mcf52x2 Files specific to Motorola ColdFire MCF52x2 CPUs + - mips Files specific to MIPS CPUs + - mpc5xx Files specific to Motorola MPC5xx CPUs + - mpc5xxx Files specific to Motorola MPC5xxx CPUs + - mpc8xx Files specific to Motorola MPC8xx CPUs + - mpc824x Files specific to Motorola MPC824x CPUs + - mpc8260 Files specific to Motorola MPC8260 CPUs + - mpc85xx Files specific to Motorola MPC85xx CPUs + - nios Files specific to Altera NIOS CPUs + - ppc4xx Files specific to IBM PowerPC 4xx CPUs + - pxa Files specific to Intel XScale PXA CPUs + - s3c44b0 Files specific to Samsung S3C44B0 CPUs + - sa1100 Files specific to Intel StrongARM SA1100 CPUs - disk Code for disk drive partition handling - doc Documentation (don't expect too much) -- drivers Common used device drivers +- drivers Commonly used device drivers - dtt Digital Thermometer and Thermostat drivers - examples Example code for standalone applications, etc. - include Header Files -- disk Harddisk interface code +- lib_arm Files generic to ARM architecture +- lib_generic Files generic to all architectures +- lib_i386 Files generic to i386 architecture +- lib_m68k Files generic to m68k architecture +- lib_mips Files generic to MIPS architecture +- lib_nios Files generic to NIOS architecture +- lib_ppc Files generic to PowerPC architecture - net Networking code -- ppc Files generic to PowerPC architecture - post Power On Self Test -- post/arch Symlink to architecture specific Power On Self Test -- post/arch-ppc PowerPC architecture specific Power On Self Test -- post/cpu/mpc8260 MPC8260 CPU specific Power On Self Test -- post/cpu/mpc8xx MPC8xx CPU specific Power On Self Test - rtc Real Time Clock drivers - tools Tools to build S-Record or U-Boot images, etc. -- cpu/74xx_7xx Files specific to Motorola MPC74xx and 7xx CPUs -- cpu/arm925t Files specific to ARM 925 CPUs -- cpu/mpc5xx Files specific to Motorola MPC5xx CPUs -- cpu/mpc8xx Files specific to Motorola MPC8xx CPUs -- cpu/mpc824x Files specific to Motorola MPC824x CPUs -- cpu/mpc8260 Files specific to Motorola MPC8260 CPU -- cpu/ppc4xx Files specific to IBM 4xx CPUs - - -- board/LEOX/ Files specific to boards manufactured by The LEOX team -- board/LEOX/elpt860 Files specific to ELPT860 boards -- board/RPXClassic - Files specific to RPXClassic boards -- board/RPXlite Files specific to RPXlite boards -- board/at91rm9200dk Files specific to AT91RM9200DK boards -- board/c2mon Files specific to c2mon boards -- board/cmi Files specific to cmi boards -- board/cogent Files specific to Cogent boards - (need further configuration) - Files specific to CPCIISER4 boards -- board/cpu86 Files specific to CPU86 boards -- board/cray/ Files specific to boards manufactured by Cray -- board/cray/L1 Files specific to L1 boards -- board/cu824 Files specific to CU824 boards -- board/ebony Files specific to IBM Ebony board -- board/eric Files specific to ERIC boards -- board/esd/ Files specific to boards manufactured by ESD -- board/esd/adciop Files specific to ADCIOP boards -- board/esd/ar405 Files specific to AR405 boards -- board/esd/canbt Files specific to CANBT boards -- board/esd/cpci405 Files specific to CPCI405 boards -- board/esd/cpciiser4 Files specific to CPCIISER4 boards -- board/esd/common Common files for ESD boards -- board/esd/dasa_sim Files specific to DASA_SIM boards -- board/esd/du405 Files specific to DU405 boards -- board/esd/ocrtc Files specific to OCRTC boards -- board/esd/pci405 Files specific to PCI405 boards -- board/esteem192e - Files specific to ESTEEM192E boards -- board/etx094 Files specific to ETX_094 boards -- board/evb64260 - Files specific to EVB64260 boards -- board/fads Files specific to FADS boards -- board/flagadm Files specific to FLAGADM boards -- board/gen860t Files specific to GEN860T and GEN860T_SC boards -- board/genietv Files specific to GENIETV boards -- board/gth Files specific to GTH boards -- board/hermes Files specific to HERMES boards -- board/hymod Files specific to HYMOD boards -- board/icu862 Files specific to ICU862 boards -- board/ip860 Files specific to IP860 boards -- board/iphase4539 - Files specific to Interphase4539 boards -- board/ivm Files specific to IVMS8/IVML24 boards -- board/lantec Files specific to LANTEC boards -- board/lwmon Files specific to LWMON boards -- board/mbx8xx Files specific to MBX boards -- board/mpc8260ads - Files specific to MPC8260ADS and PQ2FADS-ZU boards -- board/mpl/ Files specific to boards manufactured by MPL -- board/mpl/common Common files for MPL boards -- board/mpl/pip405 Files specific to PIP405 boards -- board/mpl/mip405 Files specific to MIP405 boards -- board/musenki Files specific to MUSEKNI boards -- board/mvs1 Files specific to MVS1 boards -- board/nx823 Files specific to NX823 boards -- board/oxc Files specific to OXC boards -- board/omap1510inn - Files specific to OMAP 1510 Innovator boards -- board/pcippc2 Files specific to PCIPPC2/PCIPPC6 boards -- board/pm826 Files specific to PM826 boards -- board/ppmc8260 - Files specific to PPMC8260 boards -- board/rpxsuper - Files specific to RPXsuper boards -- board/rsdproto - Files specific to RSDproto boards -- board/sandpoint - Files specific to Sandpoint boards -- board/sbc8260 Files specific to SBC8260 boards -- board/sacsng Files specific to SACSng boards -- board/siemens Files specific to boards manufactured by Siemens AG -- board/siemens/CCM Files specific to CCM boards -- board/siemens/IAD210 Files specific to IAD210 boards -- board/siemens/SCM Files specific to SCM boards -- board/siemens/pcu_e Files specific to PCU_E boards -- board/sixnet Files specific to SIXNET boards -- board/spd8xx Files specific to SPD8xxTS boards -- board/tqm8260 Files specific to TQM8260 boards -- board/tqm8xx Files specific to TQM8xxL boards -- board/w7o Files specific to W7O boards -- board/walnut405 - Files specific to Walnut405 boards -- board/westel/ Files specific to boards manufactured by Westel Wireless -- board/westel/amx860 Files specific to AMX860 boards -- board/utx8245 Files specific to UTX8245 boards - Software Configuration: ======================= @@ -301,8 +226,10 @@ The following options need to be configured: CONFIG_MPC823, CONFIG_MPC850, CONFIG_MPC855, CONFIG_MPC860 or CONFIG_MPC5xx or CONFIG_MPC824X, CONFIG_MPC8260 + or CONFIG_MPC85xx or CONFIG_IOP480 or CONFIG_405GP + or CONFIG_405EP or CONFIG_440 or CONFIG_MPC74xx or CONFIG_750FX @@ -313,53 +240,69 @@ The following options need to be configured: CONFIG_ARM7 CONFIG_PXA250 + MicroBlaze based CPUs: + ---------------------- + CONFIG_MICROBLAZE + - Board Type: Define exactly one of PowerPC based boards: --------------------- - CONFIG_ADCIOP, CONFIG_ICU862 CONFIG_RPXsuper, - CONFIG_ADS860, CONFIG_IP860, CONFIG_SM850, - CONFIG_AMX860, CONFIG_IPHASE4539, CONFIG_SPD823TS, - CONFIG_AR405, CONFIG_IVML24, CONFIG_SXNI855T, - CONFIG_BAB7xx, CONFIG_IVML24_128, CONFIG_Sandpoint8240, - CONFIG_CANBT, CONFIG_IVML24_256, CONFIG_Sandpoint8245, - CONFIG_CCM, CONFIG_IVMS8, CONFIG_TQM823L, - CONFIG_CPCI405, CONFIG_IVMS8_128, CONFIG_TQM850L, - CONFIG_CPCI4052, CONFIG_IVMS8_256, CONFIG_TQM855L, - CONFIG_CPCIISER4, CONFIG_LANTEC, CONFIG_TQM860L, - CONFIG_CPU86, CONFIG_MBX, CONFIG_TQM8260, - CONFIG_CRAYL1, CONFIG_MBX860T, CONFIG_TTTech, - CONFIG_CU824, CONFIG_MHPC, CONFIG_UTX8245, - CONFIG_DASA_SIM, CONFIG_MIP405, CONFIG_W7OLMC, - CONFIG_DU405, CONFIG_MOUSSE, CONFIG_W7OLMG, - CONFIG_ELPPC, CONFIG_MPC8260ADS, CONFIG_WALNUT405, - CONFIG_ERIC, CONFIG_MUSENKI, CONFIG_ZUMA, - CONFIG_ESTEEM192E, CONFIG_MVS1, CONFIG_c2mon, - CONFIG_ETX094, CONFIG_NX823, CONFIG_cogent_mpc8260, - CONFIG_EVB64260, CONFIG_OCRTC, CONFIG_cogent_mpc8xx, - CONFIG_FADS823, CONFIG_ORSG, CONFIG_ep8260, - CONFIG_FADS850SAR, CONFIG_OXC, CONFIG_gw8260, - CONFIG_FADS860T, CONFIG_PCI405, CONFIG_hermes, - CONFIG_FLAGADM, CONFIG_PCIPPC2, CONFIG_hymod, - CONFIG_FPS850L, CONFIG_PCIPPC6, CONFIG_lwmon, - CONFIG_GEN860T, CONFIG_PIP405, CONFIG_pcu_e, - CONFIG_GENIETV, CONFIG_PM826, CONFIG_ppmc8260, - CONFIG_GTH, CONFIG_RPXClassic, CONFIG_rsdproto, - CONFIG_IAD210, CONFIG_RPXlite, CONFIG_sbc8260, - CONFIG_EBONY, CONFIG_sacsng, CONFIG_FPS860L, - CONFIG_V37, CONFIG_ELPT860, CONFIG_CMI, - CONFIG_NETVIA, CONFIG_RBC823 + CONFIG_ADCIOP CONFIG_GEN860T CONFIG_PCI405 + CONFIG_ADS860 CONFIG_GENIETV CONFIG_PCIPPC2 + CONFIG_AMX860 CONFIG_GTH CONFIG_PCIPPC6 + CONFIG_AR405 CONFIG_gw8260 CONFIG_pcu_e + CONFIG_BAB7xx CONFIG_hermes CONFIG_PIP405 + CONFIG_c2mon CONFIG_hymod CONFIG_PM826 + CONFIG_CANBT CONFIG_IAD210 CONFIG_ppmc8260 + CONFIG_CCM CONFIG_ICU862 CONFIG_QS823 + CONFIG_CMI CONFIG_IP860 CONFIG_QS850 + CONFIG_cogent_mpc8260 CONFIG_IPHASE4539 CONFIG_QS860T + CONFIG_cogent_mpc8xx CONFIG_IVML24 CONFIG_RBC823 + CONFIG_CPCI405 CONFIG_IVML24_128 CONFIG_RPXClassic + CONFIG_CPCI4052 CONFIG_IVML24_256 CONFIG_RPXlite + CONFIG_CPCIISER4 CONFIG_IVMS8 CONFIG_RPXsuper + CONFIG_CPU86 CONFIG_IVMS8_128 CONFIG_rsdproto + CONFIG_CRAYL1 CONFIG_IVMS8_256 CONFIG_sacsng + CONFIG_CSB272 CONFIG_JSE CONFIG_Sandpoint8240 + CONFIG_CU824 CONFIG_LANTEC CONFIG_Sandpoint8245 + CONFIG_DASA_SIM CONFIG_lwmon CONFIG_sbc8260 + CONFIG_DB64360 CONFIG_MBX CONFIG_sbc8560 + CONFIG_DB64460 CONFIG_MBX860T CONFIG_SM850 + CONFIG_DU405 CONFIG_MHPC CONFIG_SPD823TS + CONFIG_DUET_ADS CONFIG_MIP405 CONFIG_STXGP3 + CONFIG_EBONY CONFIG_MOUSSE CONFIG_SXNI855T + CONFIG_ELPPC CONFIG_MPC8260ADS CONFIG_TQM823L + CONFIG_ELPT860 CONFIG_MPC8540ADS CONFIG_TQM8260 + CONFIG_ep8260 CONFIG_MPC8560ADS CONFIG_TQM850L + CONFIG_ERIC CONFIG_MUSENKI CONFIG_TQM855L + CONFIG_ESTEEM192E CONFIG_MVS1 CONFIG_TQM860L + CONFIG_ETX094 CONFIG_NETPHONE CONFIG_TTTech + CONFIG_EVB64260 CONFIG_NETTA CONFIG_UTX8245 + CONFIG_FADS823 CONFIG_NETVIA CONFIG_V37 + CONFIG_FADS850SAR CONFIG_NX823 CONFIG_W7OLMC + CONFIG_FADS860T CONFIG_OCRTC CONFIG_W7OLMG + CONFIG_FLAGADM CONFIG_ORSG CONFIG_WALNUT405 + CONFIG_FPS850L CONFIG_OXC CONFIG_ZPC1900 + CONFIG_FPS860L CONFIG_ZUMA ARM based boards: ----------------- - CONFIG_HHP_CRADLE, CONFIG_DNP1110, CONFIG_EP7312, - CONFIG_IMPA7, CONFIG_LART, CONFIG_LUBBOCK, - CONFIG_INNOVATOROMAP1510, - CONFIG_SHANNON, CONFIG_SMDK2400, CONFIG_SMDK2410, - CONFIG_TRAB, CONFIG_AT91RM9200DK + CONFIG_AT91RM9200DK, CONFIG_CERF250, CONFIG_DNP1110, + CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE, + CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610, + CONFIG_LART, CONFIG_LPD7A400 CONFIG_LUBBOCK, + CONFIG_OSK_OMAP5912, CONFIG_SHANNON, CONFIG_P2_OMAP730, + CONFIG_SMDK2400, CONFIG_SMDK2410, CONFIG_TRAB, + CONFIG_VCMA9 + + MicroBlaze based boards: + ------------------------ + + CONFIG_SUZAKU - CPU Module Type: (if CONFIG_COGENT is defined) @@ -387,20 +330,37 @@ The following options need to be configured: CONFIG_ADSTYPE Possible values are: CFG_8260ADS - original MPC8260ADS - CFG_8266ADS - MPC8266ADS (untested) - CFG_PQ2FADS - PQ2FADS-ZU - + CFG_8266ADS - MPC8266ADS + CFG_PQ2FADS - PQ2FADS-ZU or PQ2FADS-VR + CFG_8272ADS - MPC8272ADS - MPC824X Family Member (if CONFIG_MPC824X is defined) - Define exactly one of - CONFIG_MPC8240, CONFIG_MPC8245 + Define exactly one of + CONFIG_MPC8240, CONFIG_MPC8245 -- 8xx CPU Options: (if using an 8xx cpu) +- 8xx CPU Options: (if using an MPC8xx cpu) Define one or more of - CONFIG_8xx_GCLK_FREQ - if get_gclk_freq() can not work e.g. - no 32KHz reference PIT/RTC clock - -- Clock Interface: + CONFIG_8xx_GCLK_FREQ - if get_gclk_freq() cannot work + e.g. if there is no 32KHz + reference PIT/RTC clock + +- 859/866 CPU options: (if using a MPC859 or MPC866 CPU): + CFG_866_OSCCLK + CFG_866_CPUCLK_MIN + CFG_866_CPUCLK_MAX + CFG_866_CPUCLK_DEFAULT + See doc/README.MPC866 + + CFG_MEASURE_CPUCLK + + Define this to measure the actual CPU clock instead + of relying on the correctness of the configured + values. Mostly useful for board bringup to make sure + the PLL is locked at the intended frequency. Note + that this requires a (stable) reference clock (32 kHz + RTC clock), + +- Linux Kernel Interface: CONFIG_CLOCKS_IN_MHZ U-Boot stores all clock information in Hz @@ -410,11 +370,16 @@ The following options need to be configured: "clocks_in_mhz" can be defined so that U-Boot converts clock data to MHZ before passing it to the Linux kernel. - When CONFIG_CLOCKS_IN_MHZ is defined, a definition of "clocks_in_mhz=1" is automatically included in the default environment. + CONFIG_MEMSIZE_IN_BYTES [relevant for MIPS only] + + When transfering memsize parameter to linux, some versions + expect it to be in bytes, others in MB. + Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes. + - Console Interface: Depending on board, define exactly one serial port (like CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2, @@ -437,11 +402,11 @@ The following options need to be configured: bit-blit (cf. smiLynxEM) VIDEO_VISIBLE_COLS visible pixel columns (cols=pitch) - VIDEO_VISIBLE_ROWS visible pixel rows - VIDEO_PIXEL_SIZE bytes per pixel + VIDEO_VISIBLE_ROWS visible pixel rows + VIDEO_PIXEL_SIZE bytes per pixel VIDEO_DATA_FORMAT graphic data format (0-5, cf. cfb_console.c) - VIDEO_FB_ADRS framebuffer address + VIDEO_FB_ADRS framebuffer address VIDEO_KBD_INIT_FCT keyboard int fct (i.e. i8042_kbd_init()) VIDEO_TSTC_FCT test char fct @@ -468,10 +433,16 @@ The following options need to be configured: default i/o. Serial console can be forced with environment 'console=serial'. + When CONFIG_SILENT_CONSOLE is defined, all console + messages (by U-Boot and Linux!) can be silenced with + the "silent" environment variable. See + doc/README.silent for more information. + - Console Baudrate: CONFIG_BAUDRATE - in bps Select one of the baudrates listed in CFG_BAUDRATE_TABLE, see below. + CFG_BRGCLK_PRESCALE, baudrate prescale - Interrupt driven serial port input: CONFIG_SERIAL_SOFTWARE_FIFO @@ -482,8 +453,8 @@ The following options need to be configured: (RTS/CTS) and UART's built-in FIFO. Set the number of bytes the interrupt driven input buffer should have. - Set to 0 to disable this feature (this is the default). - This will also disable hardware handshake. + Leave undefined to disable this feature, including + disable the buffer and hardware handshake. - Console UART Number: CONFIG_UART1_CONSOLE @@ -568,13 +539,18 @@ The following options need to be configured: #define enables commands: ------------------------- CFG_CMD_ASKENV * ask for env variable + CFG_CMD_AUTOSCRIPT Autoscript Support CFG_CMD_BDI bdinfo CFG_CMD_BEDBUG Include BedBug Debugger + CFG_CMD_BMP * BMP support CFG_CMD_BOOTD bootd CFG_CMD_CACHE icache, dcache CFG_CMD_CONSOLE coninfo CFG_CMD_DATE * support for RTC, date/time... CFG_CMD_DHCP DHCP support + CFG_CMD_DIAG * Diagnostics + CFG_CMD_DOC * Disk-On-Chip Support + CFG_CMD_DTT Digital Therm and Thermostat CFG_CMD_ECHO * echo arguments CFG_CMD_EEPROM * EEPROM read/write support CFG_CMD_ELF bootelf, bootvx @@ -584,38 +560,50 @@ The following options need to be configured: CFG_CMD_FDOS * Dos diskette Support CFG_CMD_FLASH flinfo, erase, protect CFG_CMD_FPGA FPGA device initialization support + CFG_CMD_HWFLOW * RTS/CTS hw flow control CFG_CMD_I2C * I2C serial bus support CFG_CMD_IDE * IDE harddisk support CFG_CMD_IMI iminfo + CFG_CMD_IMLS List all found images CFG_CMD_IMMAP * IMMR dump support CFG_CMD_IRQ * irqinfo + CFG_CMD_ITEST * Integer/string test of 2 values + CFG_CMD_JFFS2 * JFFS2 Support CFG_CMD_KGDB * kgdb CFG_CMD_LOADB loadb CFG_CMD_LOADS loads CFG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base, - loop, mtest + loop, loopw, mtest + CFG_CMD_MISC Misc functions like sleep etc CFG_CMD_MMC MMC memory mapped support CFG_CMD_MII MII utility commands + CFG_CMD_NAND * NAND support CFG_CMD_NET bootp, tftpboot, rarpboot CFG_CMD_PCI * pciinfo CFG_CMD_PCMCIA * PCMCIA support + CFG_CMD_PING * send ICMP ECHO_REQUEST to network host + CFG_CMD_PORTIO * Port I/O CFG_CMD_REGINFO * Register dump CFG_CMD_RUN run command in env variable + CFG_CMD_SAVES save S record dump CFG_CMD_SCSI * SCSI Support + CFG_CMD_SDRAM * print SDRAM configuration information CFG_CMD_SETGETDCR Support for DCR Register access (4xx only) CFG_CMD_SPI * SPI serial bus support CFG_CMD_USB * USB support + CFG_CMD_VFD * VFD support (TRAB) CFG_CMD_BSP * Board SPecific functions + CFG_CMD_CDP * Cisco Discover Protocol support ----------------------------------------------- CFG_CMD_ALL all - CFG_CMD_DFL Default configuration; at the moment + CONFIG_CMD_DFL Default configuration; at the moment this is includes all commands, except the ones marked with "*" in the list above. If you don't define CONFIG_COMMANDS it defaults to - CFG_CMD_DFL in include/cmd_confdefs.h. A board can + CONFIG_CMD_DFL in include/cmd_confdefs.h. A board can override the default settings in the respective include file. @@ -640,7 +628,7 @@ The following options need to be configured: - Watchdog: CONFIG_WATCHDOG If this variable is defined, it enables watchdog - support. There must support in the platform specific + support. There must be support in the platform specific code for a watchdog. For the 8xx and 8260 CPUs, the SIU Watchdog feature is enabled in the SYPCR register. @@ -665,6 +653,7 @@ The following options need to be configured: CONFIG_RTC_DS1337 - use Maxim, Inc. DS1337 RTC CONFIG_RTC_DS1338 - use Maxim, Inc. DS1338 RTC CONFIG_RTC_DS164x - use Dallas DS164x RTC + CONFIG_RTC_MAX6900 - use Maxim, Inc. MAX6900 RTC Note that if the RTC uses I2C, then the I2C interface must also be configured. See I2C Support, below. @@ -685,16 +674,31 @@ The following options need to be configured: one partition type as well. - IDE Reset method: - CONFIG_IDE_RESET_ROUTINE + CONFIG_IDE_RESET_ROUTINE - this is defined in several + board configurations files but used nowhere! - Set this to define that instead of a reset Pin, the - routine ide_set_reset(int idereset) will be used. + CONFIG_IDE_RESET - is this is defined, IDE Reset will + be performed by calling the function + ide_set_reset(int reset) + which has to be defined in a board specific file - ATAPI Support: CONFIG_ATAPI Set this to enable ATAPI support. +- LBA48 Support + CONFIG_LBA48 + + Set this to enable support for disks larger than 137GB + Also look at CFG_64BIT_LBA ,CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL + Whithout these , LBA48 support uses 32bit variables and will 'only' + support disks up to 2.1TB. + + CFG_64BIT_LBA: + When enabled, makes the IDE subsystem use 64bit sector addresses. + Default is 32bit. + - SCSI Support: At the moment only there is only support for the SYM53C8XX SCSI controller; define @@ -739,9 +743,23 @@ The following options need to be configured: CONFIG_LAN91C96_USE_32_BIT Define this to enable 32 bit addressing + CONFIG_DRIVER_SMC91111 + Support for SMSC's LAN91C111 chip + + CONFIG_SMC91111_BASE + Define this to hold the physical address + of the device (I/O space) + + CONFIG_SMC_USE_32_BIT + Define this if data bus is 32 bits + + CONFIG_SMC_USE_IOFUNCS + Define this to use i/o functions instead of macros + (some hardware wont work with macros) + - USB Support: At the moment only the UHCI host controller is - supported (PIP405, MIP405); define + supported (PIP405, MIP405, MPC5200); define CONFIG_USB_UHCI to enable it. define CONFIG_USB_KEYBOARD to enable the USB Keyboard end define CONFIG_USB_STORAGE to enable the USB @@ -749,6 +767,13 @@ The following options need to be configured: Note: Supported are USB Keyboards and USB Floppy drives (TEAC FD-05PUB). + MPC5200 USB requires additional defines: + CONFIG_USB_CLOCK + for 528 MHz Clock: 0x0001bbbb + CONFIG_USB_CONFIG + for differential drivers: 0x00001000 + for single ended drivers: 0x00005000 + - MMC Support: The MMC controller on the Intel PXA is supported. To @@ -781,17 +806,30 @@ The following options need to be configured: Enable Chips & Technologies 69000 Video chip CONFIG_VIDEO_SMI_LYNXEM - Enable Silicon Motion SMI 712/710/810 Video chip - Videomode are selected via environment 'videomode' with - standard LiLo mode numbers. - Following modes are supported (* is default): - - 800x600 1024x768 1280x1024 - 256 (8bit) 303* 305 307 - 65536 (16bit) 314 317 31a - 16,7 Mill (24bit) 315 318 31b + Enable Silicon Motion SMI 712/710/810 Video chip. The + video output is selected via environment 'videoout' + (1 = LCD and 2 = CRT). If videoout is undefined, CRT is + assumed. + + For the CT69000 and SMI_LYNXEM drivers, videomode is + selected via environment 'videomode'. Two diferent ways + are possible: + - "videomode=num" 'num' is a standard LiLo mode numbers. + Following standard modes are supported (* is default): + + Colors 640x480 800x600 1024x768 1152x864 1280x1024 + -------------+--------------------------------------------- + 8 bits | 0x301* 0x303 0x305 0x161 0x307 + 15 bits | 0x310 0x313 0x316 0x162 0x319 + 16 bits | 0x311 0x314 0x317 0x163 0x31A + 24 bits | 0x312 0x315 0x318 ? 0x31B + -------------+--------------------------------------------- (i.e. setenv videomode 317; saveenv; reset;) + - "videomode=bootargs" all the video parameters are parsed + from the bootargs. (See drivers/videomodes.c) + + CONFIG_VIDEO_SED13806 Enable Epson SED13806 driver. This driver supports 8bpp and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP @@ -811,13 +849,18 @@ The following options need to be configured: display); also select one of the supported displays by defining one of these: - CONFIG_NEC_NL6648AC33: + CONFIG_NEC_NL6448AC33: + + NEC NL6448AC33-18. Active, color, single scan. - NEC NL6648AC33-18. Active, color, single scan. + CONFIG_NEC_NL6448BC20 + + NEC NL6448BC20-08. 6.5", 640x480. + Active, color, single scan. - CONFIG_NEC_NL6648BC20 + CONFIG_NEC_NL6448BC33_54 - NEC NL6648BC20-08. 6.5", 640x480. + NEC NL6448BC33-54. 10.4", 640x480. Active, color, single scan. CONFIG_SHARP_16x9 @@ -848,17 +891,53 @@ The following options need to be configured: Normally display is black on white background; define CFG_WHITE_ON_BLACK to get it inverted. -- Spash Screen Support: CONFIG_SPLASH_SCREEN +- Splash Screen Support: CONFIG_SPLASH_SCREEN If this option is set, the environment is checked for a variable "splashimage". If found, the usual display of logo, copyright and system information on the LCD - is supressed and the BMP image at the address + is suppressed and the BMP image at the address specified in "splashimage" is loaded instead. The console is redirected to the "nulldev", too. This allows for a "silent" boot where a splash screen is loaded very quickly after power-on. +- Compression support: + CONFIG_BZIP2 + + If this option is set, support for bzip2 compressed + images is included. If not, only uncompressed and gzip + compressed images are supported. + + NOTE: the bzip2 algorithm requires a lot of RAM, so + the malloc area (as defined by CFG_MALLOC_LEN) should + be at least 4MB. + +- MII/PHY support: + CONFIG_PHY_ADDR + + The address of PHY on MII bus. + + CONFIG_PHY_CLOCK_FREQ (ppc4xx) + + The clock frequency of the MII bus + + CONFIG_PHY_GIGE + + If this option is set, support for speed/duplex + detection of Gigabit PHY is included. + + CONFIG_PHY_RESET_DELAY + + Some PHY like Intel LXT971A need extra delay after + reset before any MII register access is possible. + For such PHY, set this option to the usec delay + required. (minimum 300usec for LXT971A) + + CONFIG_PHY_CMD_DELAY (ppc4xx) + + Some PHY like Intel LXT971A need extra delay after + command issued before MII status register can be read - Ethernet address: CONFIG_ETHADDR @@ -901,6 +980,71 @@ The following options need to be configured: 4th and following BOOTP requests: delay 0 ... 8 sec +- DHCP Advanced Options: + CONFIG_BOOTP_MASK + + You can fine tune the DHCP functionality by adding + these flags to the CONFIG_BOOTP_MASK define: + + CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS + serverip from a DHCP server, it is possible that more + than one DNS serverip is offered to the client. + If CONFIG_BOOTP_DNS2 is enabled, the secondary DNS + serverip will be stored in the additional environment + variable "dnsip2". The first DNS serverip is always + stored in the variable "dnsip", when CONFIG_BOOTP_DNS + is added to the CONFIG_BOOTP_MASK. + + CONFIG_BOOTP_SEND_HOSTNAME - Some DHCP servers are capable + to do a dynamic update of a DNS server. To do this, they + need the hostname of the DHCP requester. + If CONFIG_BOOP_SEND_HOSTNAME is added to the + CONFIG_BOOTP_MASK, the content of the "hostname" + environment variable is passed as option 12 to + the DHCP server. + + - CDP Options: + CONFIG_CDP_DEVICE_ID + + The device id used in CDP trigger frames. + + CONFIG_CDP_DEVICE_ID_PREFIX + + A two character string which is prefixed to the MAC address + of the device. + + CONFIG_CDP_PORT_ID + + A printf format string which contains the ascii name of + the port. Normally is set to "eth%d" which sets + eth0 for the first ethernet, eth1 for the second etc. + + CONFIG_CDP_CAPABILITIES + + A 32bit integer which indicates the device capabilities; + 0x00000010 for a normal host which does not forwards. + + CONFIG_CDP_VERSION + + An ascii string containing the version of the software. + + CONFIG_CDP_PLATFORM + + An ascii string containing the name of the platform. + + CONFIG_CDP_TRIGGER + + A 32bit integer sent on the trigger. + + CONFIG_CDP_POWER_CONSUMPTION + + A 16bit integer containing the power consumption of the + device in .1 of milliwatts. + + CONFIG_CDP_APPLIANCE_VLAN_TYPE + + A byte containing the id of the VLAN. + - Status LED: CONFIG_STATUS_LED Several configurations allow to display the current @@ -930,7 +1074,7 @@ The following options need to be configured: clock chips. See common/cmd_i2c.c for a description of the command line interface. - CONFIG_HARD_I2C selects the CPM hardware driver for I2C. + CONFIG_HARD_I2C selects the CPM hardware driver for I2C. CONFIG_SOFT_I2C configures u-boot to use a software (aka bit-banging) driver instead of CPM or similar hardware @@ -960,7 +1104,7 @@ The following options need to be configured: (Optional). Any commands necessary to enable the I2C controller or configure ports. - eg: #define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) + eg: #define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) I2C_PORT @@ -998,7 +1142,7 @@ The following options need to be configured: eg: #define I2C_SDA(bit) \ if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ - else immr->im_cpm.cp_pbdat &= ~PB_SDA + else immr->im_cpm.cp_pbdat &= ~PB_SDA I2C_SCL(bit) @@ -1007,7 +1151,7 @@ The following options need to be configured: eg: #define I2C_SCL(bit) \ if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ - else immr->im_cpm.cp_pbdat &= ~PB_SCL + else immr->im_cpm.cp_pbdat &= ~PB_SCL I2C_DELAY @@ -1029,6 +1173,12 @@ The following options need to be configured: custom i2c_init_board() routine in boards/xxx/board.c is run early in the boot sequence. + CONFIG_I2CFAST (PPC405GP|PPC405EP only) + + This option enables configuration of bi_iic_fast[] flags + in u-boot bd_info structure based on u-boot environment + variable "i2cfast". (see also i2cfast) + - SPI Support: CONFIG_SPI Enables SPI driver (so far only tested with @@ -1056,60 +1206,6 @@ The following options need to be configured: CONFIG_FPGA - Used to specify the types of FPGA devices. For - example, - #define CONFIG_FPGA CFG_XILINX_VIRTEX2 - - CFG_FPGA_PROG_FEEDBACK - - Enable printing of hash marks during FPGA - configuration. - - CFG_FPGA_CHECK_BUSY - - Enable checks on FPGA configuration interface busy - status by the configuration function. This option - will require a board or device specific function to - be written. - - CONFIG_FPGA_DELAY - - If defined, a function that provides delays in the - FPGA configuration driver. - - CFG_FPGA_CHECK_CTRLC - - Allow Control-C to interrupt FPGA configuration - - CFG_FPGA_CHECK_ERROR - - Check for configuration errors during FPGA bitfile - loading. For example, abort during Virtex II - configuration if the INIT_B line goes low (which - indicated a CRC error). - - CFG_FPGA_WAIT_INIT - - Maximum time to wait for the INIT_B line to deassert - after PROB_B has been deasserted during a Virtex II - FPGA configuration sequence. The default time is 500 mS. - - CFG_FPGA_WAIT_BUSY - - Maximum time to wait for BUSY to deassert during - Virtex II FPGA configuration. The default is 5 mS. - - CFG_FPGA_WAIT_CONFIG - - Time to wait after FPGA configuration. The default is - 200 mS. - -- FPGA Support: CONFIG_FPGA_COUNT - - Specify the number of FPGA devices to support. - - CONFIG_FPGA - Used to specify the types of FPGA devices. For example, #define CONFIG_FPGA CFG_XILINX_VIRTEX2 @@ -1166,7 +1262,7 @@ The following options need to be configured: U-Boot considers the values of the environment variables "serial#" (Board Serial Number) and - "ethaddr" (Ethernet Address) to bb parameters that + "ethaddr" (Ethernet Address) to be parameters that are set once by the board vendor / manufacturer, and protects these variables from casual modification by the user. Once set, these variables are read-only, @@ -1237,6 +1333,10 @@ The following options need to be configured: default value of 5 is used. - Command Interpreter: + CFG_AUTO_COMPLETE + + Enable auto completion of commands using TAB. + CFG_HUSH_PARSER Define this variable to enable the "hush" shell (from @@ -1276,12 +1376,12 @@ The following options need to be configured: of the backslashes before semicolons and special symbols. -- Default Environment +- Default Environment: CONFIG_EXTRA_ENV_SETTINGS Define this to contain any number of null terminated strings (variable = value pairs) that will be part of - the default enviroment compiled into the boot image. + the default environment compiled into the boot image. For example, place something like this in your board's config file: @@ -1294,7 +1394,7 @@ The following options need to be configured: internal format how the environment is stored by the U-Boot code. This is NOT an official, exported interface! Although it is unlikely that this format - will change soon, but there is no guarantee either. + will change soon, there is no guarantee either. You better know what you are doing here. Note: overly (ab)use of the default environment is @@ -1302,14 +1402,28 @@ The following options need to be configured: the environment like the autoscript function or the boot command first. -- DataFlash Support +- DataFlash Support: CONFIG_HAS_DATAFLASH Defining this option enables DataFlash features and allows to read/write in Dataflash via the standard commands cp, md... -- Show boot progress +- SystemACE Support: + CONFIG_SYSTEMACE + + Adding this option adds support for Xilinx SystemACE + chips attached via some sort of local bus. The address + of the chip must alsh be defined in the + CFG_SYSTEMACE_BASE macro. For example: + + #define CONFIG_SYSTEMACE + #define CFG_SYSTEMACE_BASE 0xf0000000 + + When SystemACE support is added, the "ace" device type + becomes available to the fat commands, i.e. fatls. + +- Show boot progress: CONFIG_SHOW_BOOT_PROGRESS Defining this option allows to add some board- @@ -1321,11 +1435,11 @@ The following options need to be configured: Arg Where When 1 common/cmd_bootm.c before attempting to boot an image - -1 common/cmd_bootm.c Image header has bad magic number + -1 common/cmd_bootm.c Image header has bad magic number 2 common/cmd_bootm.c Image header has correct magic number - -2 common/cmd_bootm.c Image header has bad checksum + -2 common/cmd_bootm.c Image header has bad checksum 3 common/cmd_bootm.c Image header has correct checksum - -3 common/cmd_bootm.c Image data has bad checksum + -3 common/cmd_bootm.c Image data has bad checksum 4 common/cmd_bootm.c Image data has correct checksum -4 common/cmd_bootm.c Image is for unsupported architecture 5 common/cmd_bootm.c Architecture check OK @@ -1338,10 +1452,10 @@ The following options need to be configured: 8 common/cmd_bootm.c Image Type check OK -9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX) 9 common/cmd_bootm.c Start initial ramdisk verification - -10 common/cmd_bootm.c Ramdisk header has bad magic number - -11 common/cmd_bootm.c Ramdisk header has bad checksum + -10 common/cmd_bootm.c Ramdisk header has bad magic number + -11 common/cmd_bootm.c Ramdisk header has bad checksum 10 common/cmd_bootm.c Ramdisk header is OK - -12 common/cmd_bootm.c Ramdisk data has bad checksum + -12 common/cmd_bootm.c Ramdisk data has bad checksum 11 common/cmd_bootm.c Ramdisk data has correct checksum 12 common/cmd_bootm.c Ramdisk verification complete, start loading -13 common/cmd_bootm.c Wrong Image Type (not PPC Linux Ramdisk) @@ -1349,6 +1463,10 @@ The following options need to be configured: 14 common/cmd_bootm.c No initial ramdisk, no multifile, continue. 15 common/cmd_bootm.c All preparation done, transferring control to OS + -30 lib_ppc/board.c Fatal error, hang the system + -31 post/post.c POST test failed, detected by post_output_backlog() + -32 post/post.c POST test failed, detected by post_run_single() + -1 common/cmd_doc.c Bad usage of "doc" command -1 common/cmd_doc.c No boot device -1 common/cmd_doc.c Unknown Chip ID on boot device @@ -1363,7 +1481,13 @@ The following options need to be configured: -1 common/cmd_ide.c Read Error on boot device -1 common/cmd_ide.c Image header has bad magic number - -1 common/cmd_nvedit.c Environment not changable, but has bad CRC + -1 common/cmd_nand.c Bad usage of "nand" command + -1 common/cmd_nand.c No boot device + -1 common/cmd_nand.c Unknown Chip ID on boot device + -1 common/cmd_nand.c Read Error on boot device + -1 common/cmd_nand.c Image header has bad magic number + + -1 common/env_common.c Environment has a bad CRC, using default Modem Support: @@ -1383,6 +1507,19 @@ Modem Support: Enables debugging stuff (char screen[1024], dbg()) for modem support. Useful only with BDI2000. +- Interrupt support (PPC): + + There are common interrupt_init() and timer_interrupt() + for all PPC archs. interrupt_init() calls interrupt_init_cpu() + for cpu specific initialization. interrupt_init_cpu() + should set decrementer_count to appropriate value. If + cpu resets decrementer automatically after interrupt + (ppc4xx) it should set decrementer_count to zero. + timer_interrupt() calls timer_interrupt_cpu() for cpu + specific handling. If board has watchdog / status_led + / other_activity_monitor it works automatically from + general timer_interrupt(). + - General: In the target system modem support is enabled when a @@ -1445,6 +1582,10 @@ Configuration Settings: - CFG_ALT_MEMTEST: Enable an alternate, more extensive memory test. +- CFG_MEMTEST_SCRATCH: + Scratch address used by the alternate memory test + You only need to set this if address zero isn't writeable + - CFG_TFTP_LOADADDR: Default load address for network file downloads @@ -1519,7 +1660,11 @@ Configuration Settings: - CFG_FLASH_CFI: Define if the flash driver uses extra elements in the - common flash structure for storing flash geometry + common flash structure for storing flash geometry. + +- CFG_FLASH_CFI_DRIVER + This option also enables the building of the cfi_flash driver + in the drivers directory - CFG_RX_ETH_BUFFER: Defines the number of ethernet receive buffers. On some @@ -1650,16 +1795,51 @@ to save the current settings. - CFG_EEPROM_PAGE_WRITE_DELAY_MS: If defined, the number of milliseconds to delay between - page writes. The default is zero milliseconds. + page writes. The default is zero milliseconds. - CFG_I2C_EEPROM_ADDR_LEN: The length in bytes of the EEPROM memory array address. Note that this is NOT the chip address length! + - CFG_I2C_EEPROM_ADDR_OVERFLOW: + EEPROM chips that implement "address overflow" are ones + like Catalyst 24WC04/08/16 which has 9/10/11 bits of + address and the extra bits end up in the "chip address" bit + slots. This makes a 24WC08 (1Kbyte) chip look like four 256 + byte chips. + + Note that we consider the length of the address field to + still be one byte because the extra address bits are hidden + in the chip address. + - CFG_EEPROM_SIZE: The size in bytes of the EEPROM device. +- CFG_ENV_IS_IN_DATAFLASH: + + Define this if you have a DataFlash memory device which you + want to use for the environment. + + - CFG_ENV_OFFSET: + - CFG_ENV_ADDR: + - CFG_ENV_SIZE: + + These three #defines specify the offset and size of the + environment area within the total memory of your DataFlash placed + at the specified address. + +- CFG_ENV_IS_IN_NAND: + + Define this if you have a NAND device which you want to use + for the environment. + + - CFG_ENV_OFFSET: + - CFG_ENV_SIZE: + + These two #defines specify the offset and size of the environment + area within the first NAND device. + - CFG_SPI_INIT_OFFSET Defines offset to the initial SPI buffer area in DPRAM. The @@ -1686,6 +1866,21 @@ Note: once the monitor has been relocated, then it will complain if the default environment is used; a new CRC is computed as soon as you use the "saveenv" command to store a valid environment. +- CFG_FAULT_ECHO_LINK_DOWN: + Echo the inverted Ethernet link state to the fault LED. + + Note: If this option is active, then CFG_FAULT_MII_ADDR + also needs to be defined. + +- CFG_FAULT_MII_ADDR: + MII address of the PHY to check for the Ethernet link state. + +- CFG_64BIT_VSPRINTF: + Makes vsprintf (and all *printf functions) support printing + of 64bit values by using the L quantifier + +- CFG_64BIT_STRTOUL: + Adds simple_strtoull that returns a 64bit value Low Level (hardware related) configuration options: --------------------------------------------------- @@ -1696,9 +1891,9 @@ Low Level (hardware related) configuration options: - CFG_DEFAULT_IMMR: Default address of the IMMR after system reset. - Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU, - and RPXsuper) to be able to adjust the position of - the IMMR register after a reset. + Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU, + and RPXsuper) to be able to adjust the position of + the IMMR register after a reset. - Floppy Disk Support: CFG_FDC_DRIVE_NUMBER @@ -1732,7 +1927,7 @@ Low Level (hardware related) configuration options: - CFG_INIT_RAM_ADDR: - Start address of memory area tha can be used for + Start address of memory area that can be used for initial data and stack; please note that this must be writable memory that is working WITHOUT special initialization, i. e. you CANNOT use normal RAM which @@ -1828,6 +2023,40 @@ Low Level (hardware related) configuration options: CFG_POCMR2_MASK_ATTRIB: (MPC826x only) Overrides the default PCI memory map in cpu/mpc8260/pci.c if set. +- CONFIG_ETHER_ON_FEC[12] + Define to enable FEC[12] on a 8xx series processor. + +- CONFIG_FEC[12]_PHY + Define to the hardcoded PHY address which corresponds + to the given FEC; i. e. + #define CONFIG_FEC1_PHY 4 + means that the PHY with address 4 is connected to FEC1 + + When set to -1, means to probe for first available. + +- CONFIG_FEC[12]_PHY_NORXERR + The PHY does not have a RXERR line (RMII only). + (so program the FEC to ignore it). + +- CONFIG_RMII + Enable RMII mode for all FECs. + Note that this is a global option, we can't + have one FEC in standard MII mode and another in RMII mode. + +- CONFIG_CRC32_VERIFY + Add a verify option to the crc32 command. + The syntax is: + + => crc32 -v