X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;ds=sidebyside;f=Makefile;h=8c735866c1549733a0dce0419ad73a94c0c08c21;hb=75edebe3011c963a7cd84be0f4a987477f2aaf89;hp=2f07657f5df16f59c6fdac794369d0e37432e0d7;hpb=1951f847f0a851853871b613ad7cf21a5242226c;p=oweals%2Fu-boot.git diff --git a/Makefile b/Makefile index 2f07657f5d..8c735866c1 100644 --- a/Makefile +++ b/Makefile @@ -21,8 +21,8 @@ # MA 02111-1307 USA # -VERSION = 2008 -PATCHLEVEL = 10 +VERSION = 2009 +PATCHLEVEL = 01 SUBLEVEL = EXTRAVERSION = ifneq "$(SUBLEVEL)" "" @@ -197,7 +197,7 @@ include $(TOPDIR)/config.mk OBJS = cpu/$(CPU)/start.o ifeq ($(CPU),i386) OBJS += cpu/$(CPU)/start16.o -OBJS += cpu/$(CPU)/reset.o +OBJS += cpu/$(CPU)/resetvec.o endif ifeq ($(CPU),ppc4xx) OBJS += cpu/$(CPU)/resetvec.o @@ -228,6 +228,7 @@ LIBS += drivers/bios_emulator/libatibiosemu.a LIBS += drivers/block/libblock.a LIBS += drivers/dma/libdma.a LIBS += drivers/fpga/libfpga.a +LIBS += drivers/gpio/libgpio.a LIBS += drivers/hwmon/libhwmon.a LIBS += drivers/i2c/libi2c.a LIBS += drivers/input/libinput.a @@ -347,7 +348,7 @@ $(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(OBJS): depend $(obj)include/autoconf.mk $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@)) -$(LIBS): depend $(obj)include/autoconf.mk +$(LIBS): depend $(obj)include/autoconf.mk $(SUBDIRS) $(MAKE) -C $(dir $(subst $(obj),,$@)) $(LIBBOARD): depend $(LIBS) $(obj)include/autoconf.mk @@ -407,6 +408,7 @@ TAG_SUBDIRS += disk TAG_SUBDIRS += common TAG_SUBDIRS += drivers/bios_emulator TAG_SUBDIRS += drivers/block +TAG_SUBDIRS += drivers/gpio TAG_SUBDIRS += drivers/hwmon TAG_SUBDIRS += drivers/i2c TAG_SUBDIRS += drivers/input @@ -463,7 +465,8 @@ $(obj)include/autoconf.mk: $(obj)include/config.h set -e ; \ : Extract the config macros ; \ $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \ - sed -n -f tools/scripts/define2mk.sed > $@ + sed -n -f tools/scripts/define2mk.sed > $@.tmp && \ + mv $@.tmp $@ sinclude $(obj)include/autoconf.mk.dep @@ -2183,6 +2186,9 @@ TASREG_config : unconfig ## MPC83xx Systems ######################################################################### +kmeter1_config: unconfig + @$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile + MPC8313ERDB_33_config \ MPC8313ERDB_66_config \ MPC8313ERDB_NAND_33_config \ @@ -2322,6 +2328,21 @@ MVBLM7_config: unconfig sbc8349_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349 +SIMPC8313_LP_config \ +SIMPC8313_SP_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/sheldon/simpc8313 + @if [ "$(findstring _LP_,$@)" ] ; then \ + $(XECHO) -n "...Large Page NAND..." ; \ + echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \ + fi ; \ + if [ "$(findstring _SP_,$@)" ] ; then \ + $(XECHO) -n "...Small Page NAND..." ; \ + echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \ + fi ; + @$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon + @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + TQM834x_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc @@ -2395,8 +2416,14 @@ MPC8555CDS_config: unconfig MPC8568MDS_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale +MPC8572DS_36BIT_config \ MPC8572DS_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8572ds freescale + @mkdir -p $(obj)include + @if [ "$(findstring _36BIT_,$@)" ] ; then \ + echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \ + $(XECHO) "... enabling 36-bit physical addressing." ; \ + fi + @$(MKCONFIG) -a MPC8572DS ppc mpc85xx mpc8572ds freescale PM854_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854 @@ -2460,6 +2487,12 @@ TQM8560_config: unconfig echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h; @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc +XPEDITE5200_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes + +XPEDITE5370_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes + ######################################################################### ## MPC86xx Systems ######################################################################### @@ -2593,6 +2626,7 @@ at91sam9260ek_nandflash_config \ at91sam9260ek_dataflash_cs0_config \ at91sam9260ek_dataflash_cs1_config \ at91sam9260ek_config : unconfig + @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ @@ -2605,10 +2639,28 @@ at91sam9260ek_config : unconfig fi; @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 +at91sam9xeek_nandflash_config \ +at91sam9xeek_dataflash_cs0_config \ +at91sam9xeek_dataflash_cs1_config \ +at91sam9xeek_config : unconfig + @mkdir -p $(obj)include + @if [ "$(findstring _nandflash,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in NAND FLASH" ; \ + elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ + else \ + echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ + fi; + @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91sam9 + at91sam9261ek_nandflash_config \ at91sam9261ek_dataflash_cs0_config \ at91sam9261ek_dataflash_cs3_config \ at91sam9261ek_config : unconfig + @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ @@ -2625,6 +2677,7 @@ at91sam9263ek_nandflash_config \ at91sam9263ek_dataflash_config \ at91sam9263ek_dataflash_cs0_config \ at91sam9263ek_config : unconfig + @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ @@ -2638,6 +2691,7 @@ at91sam9rlek_nandflash_config \ at91sam9rlek_dataflash_config \ at91sam9rlek_dataflash_cs0_config \ at91sam9rlek_config : unconfig + @mkdir -p $(obj)include @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ @@ -2960,14 +3014,17 @@ smdk6400_config : unconfig ######################################################################### ## AMD SC520 CDP ######################################################################### +eNET_config : unconfig + @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520 + sc520_cdp_config : unconfig - @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp + @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520 sc520_spunk_config : unconfig - @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk + @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520 sc520_spunk_rel_config : unconfig - @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk + @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520 #======================================================================== # MIPS @@ -3140,21 +3197,15 @@ PCI5441_config : unconfig ## Microblaze #======================================================================== -ml401_config: unconfig +microblaze-generic_config: unconfig @mkdir -p $(obj)include - @echo "#define CONFIG_ML401 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx + @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx suzaku_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno -xupv2p_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_XUPV2P 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx - #======================================================================== # Blackfin #======================================================================== @@ -3205,9 +3256,9 @@ mimc200_config : unconfig ## sh2 (Renesas SuperH) ######################################################################### rsk7203_config: unconfig - @ >include/config.h - @echo "#define CONFIG_RSK7203 1" >> include/config.h - @./mkconfig -a $(@:_config=) sh sh2 rsk7203 renesas + @mkdir -p $(obj)include + @echo "#define CONFIG_RSK7203 1" > $(obj)/include/config.h + @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas ######################################################################### ## sh3 (Renesas SuperH) @@ -3230,7 +3281,7 @@ ms7720se_config: unconfig MigoR_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h - @./mkconfig -a $(@:_config=) sh sh4 MigoR renesas + @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas ms7750se_config: unconfig @mkdir -p $(obj)include