* Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
* Copyright (C) 2005-2006 by Rob Landley <rob@landley.net>
*
- * Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
+ * Licensed under GPLv2 or later, see file LICENSE in this source tree.
*/
-
-/* Design notes: There is no spec for mount. Remind me to write one.
-
- mount_main() calls singlemount() which calls mount_it_now().
-
- mount_main() can loop through /etc/fstab for mount -a
- singlemount() can loop through /etc/filesystems for fstype detection.
- mount_it_now() does the actual mount.
-*/
+// Design notes: There is no spec for mount. Remind me to write one.
+//
+// mount_main() calls singlemount() which calls mount_it_now().
+//
+// mount_main() can loop through /etc/fstab for mount -a
+// singlemount() can loop through /etc/filesystems for fstype detection.
+// mount_it_now() does the actual mount.
+//
+
+//usage:#define mount_trivial_usage
+//usage: "[OPTIONS] [-o OPTS] DEVICE NODE"
+//usage:#define mount_full_usage "\n\n"
+//usage: "Mount a filesystem. Filesystem autodetection requires /proc.\n"
+//usage: "\n -a Mount all filesystems in fstab"
+//usage: IF_FEATURE_MOUNT_FAKE(
+//usage: IF_FEATURE_MTAB_SUPPORT(
+//usage: "\n -f Update /etc/mtab, but don't mount"
+//usage: )
+//usage: IF_NOT_FEATURE_MTAB_SUPPORT(
+//usage: "\n -f Dry run"
+//usage: )
+//usage: )
+//usage: IF_FEATURE_MOUNT_HELPERS(
+//usage: "\n -i Don't run mount helper"
+//usage: )
+//usage: IF_FEATURE_MTAB_SUPPORT(
+//usage: "\n -n Don't update /etc/mtab"
+//usage: )
+//usage: IF_FEATURE_MOUNT_VERBOSE(
+//usage: "\n -v Verbose"
+//usage: )
+////usage: "\n -s Sloppy (ignored)"
+//usage: "\n -r Read-only mount"
+//usage: "\n -w Read-write mount (default)"
+//usage: "\n -t FSTYPE[,...] Filesystem type(s)"
+//usage: "\n -O OPT Mount only filesystems with option OPT (-a only)"
+//usage: "\n-o OPT:"
+//usage: IF_FEATURE_MOUNT_LOOP(
+//usage: "\n loop Ignored (loop devices are autodetected)"
+//usage: )
+//usage: IF_FEATURE_MOUNT_FLAGS(
+//usage: "\n [a]sync Writes are [a]synchronous"
+//usage: "\n [no]atime Disable/enable updates to inode access times"
+//usage: "\n [no]diratime Disable/enable atime updates to directories"
+//usage: "\n [no]relatime Disable/enable atime updates relative to modification time"
+//usage: "\n [no]dev (Dis)allow use of special device files"
+//usage: "\n [no]exec (Dis)allow use of executable files"
+//usage: "\n [no]suid (Dis)allow set-user-id-root programs"
+//usage: "\n [r]shared Convert [recursively] to a shared subtree"
+//usage: "\n [r]slave Convert [recursively] to a slave subtree"
+//usage: "\n [r]private Convert [recursively] to a private subtree"
+//usage: "\n [un]bindable Make mount point [un]able to be bind mounted"
+//usage: "\n [r]bind Bind a file or directory [recursively] to another location"
+//usage: "\n move Relocate an existing mount point"
+//usage: )
+//usage: "\n remount Remount a mounted filesystem, changing flags"
+//usage: "\n ro/rw Same as -r/-w"
+//usage: "\n"
+//usage: "\nThere are filesystem-specific -o flags."
+//usage:
+//usage:#define mount_example_usage
+//usage: "$ mount\n"
+//usage: "/dev/hda3 on / type minix (rw)\n"
+//usage: "proc on /proc type proc (rw)\n"
+//usage: "devpts on /dev/pts type devpts (rw)\n"
+//usage: "$ mount /dev/fd0 /mnt -t msdos -o ro\n"
+//usage: "$ mount /tmp/diskimage /opt -t ext2 -o loop\n"
+//usage: "$ mount cd_image.iso mydir\n"
+//usage:#define mount_notes_usage
+//usage: "Returns 0 for success, number of failed mounts for -a, or errno for one mount."
#include <mntent.h>
#include <syslog.h>
-#include "libbb.h"
+#include <sys/mount.h>
+// Grab more as needed from util-linux's mount/mount_constants.h
+#ifndef MS_DIRSYNC
+# define MS_DIRSYNC (1 << 7) // Directory modifications are synchronous
+#endif
+#ifndef MS_UNION
+# define MS_UNION (1 << 8)
+#endif
+#ifndef MS_BIND
+# define MS_BIND (1 << 12)
+#endif
+#ifndef MS_MOVE
+# define MS_MOVE (1 << 13)
+#endif
+#ifndef MS_RECURSIVE
+# define MS_RECURSIVE (1 << 14)
+#endif
+#ifndef MS_SILENT
+# define MS_SILENT (1 << 15)
+#endif
+// The shared subtree stuff, which went in around 2.6.15
+#ifndef MS_UNBINDABLE
+# define MS_UNBINDABLE (1 << 17)
+#endif
+#ifndef MS_PRIVATE
+# define MS_PRIVATE (1 << 18)
+#endif
+#ifndef MS_SLAVE
+# define MS_SLAVE (1 << 19)
+#endif
+#ifndef MS_SHARED
+# define MS_SHARED (1 << 20)
+#endif
+#ifndef MS_RELATIME
+# define MS_RELATIME (1 << 21)
+#endif
+#ifndef MS_STRICTATIME
+# define MS_STRICTATIME (1 << 24)
+#endif
+/* Any ~MS_FOO value has this bit set: */
+#define BB_MS_INVERTED_VALUE (1u << 31)
+
+#include "libbb.h"
#if ENABLE_FEATURE_MOUNT_LABEL
-#include "volume_id.h"
+# include "volume_id.h"
+#else
+# define resolve_mount_spec(fsname) ((void)0)
#endif
-/* Needed for nfs support only */
+// Needed for nfs support only
#include <sys/utsname.h>
#undef TRUE
#undef FALSE
-#include <rpc/rpc.h>
-#include <rpc/pmap_prot.h>
-#include <rpc/pmap_clnt.h>
-
-#ifndef MS_SILENT
-#define MS_SILENT (1 << 15)
-#endif
-/* Grab more as needed from util-linux's mount/mount_constants.h */
-#ifndef MS_DIRSYNC
-#define MS_DIRSYNC 128 /* Directory modifications are synchronous */
+#if ENABLE_FEATURE_MOUNT_NFS
+/* This is just a warning of a common mistake. Possibly this should be a
+ * uclibc faq entry rather than in busybox... */
+# if defined(__UCLIBC__) && ! defined(__UCLIBC_HAS_RPC__)
+# error "You need to build uClibc with UCLIBC_HAS_RPC for NFS support"
+# endif
+# include <rpc/rpc.h>
+# include <rpc/pmap_prot.h>
+# include <rpc/pmap_clnt.h>
#endif
#if defined(__dietlibc__)
-/* 16.12.2006, Sampo Kellomaki (sampo@iki.fi)
- * dietlibc-0.30 does not have implementation of getmntent_r() */
-static struct mntent *getmntent_r(FILE* stream, struct mntent* result, char* buffer, int bufsize)
+// 16.12.2006, Sampo Kellomaki (sampo@iki.fi)
+// dietlibc-0.30 does not have implementation of getmntent_r()
+static struct mntent *getmntent_r(FILE* stream, struct mntent* result,
+ char* buffer UNUSED_PARAM, int bufsize UNUSED_PARAM)
{
struct mntent* ment = getmntent(stream);
- memcpy(result, ment, sizeof(struct mntent));
- return result;
+ return memcpy(result, ment, sizeof(*ment));
}
#endif
};
-#define OPTION_STR "o:t:rwanfvsi"
+#define OPTION_STR "o:t:rwanfvsiO:"
enum {
OPT_o = (1 << 0),
OPT_t = (1 << 1),
OPT_v = (1 << 7),
OPT_s = (1 << 8),
OPT_i = (1 << 9),
+ OPT_O = (1 << 10),
};
#if ENABLE_FEATURE_MTAB_SUPPORT
-#define useMtab (!(option_mask32 & OPT_n))
+#define USE_MTAB (!(option_mask32 & OPT_n))
#else
-#define useMtab 0
+#define USE_MTAB 0
#endif
#if ENABLE_FEATURE_MOUNT_FAKE
-#define fakeIt (option_mask32 & OPT_f)
+#define FAKE_IT (option_mask32 & OPT_f)
#else
-#define fakeIt 0
+#define FAKE_IT 0
+#endif
+
+#if ENABLE_FEATURE_MOUNT_HELPERS
+#define HELPERS_ALLOWED (!(option_mask32 & OPT_i))
+#else
+#define HELPERS_ALLOWED 0
#endif
// This may be useful e.g. for /dev/fd if a login script makes
// the console user owner of this device.
-/* Standard mount options (from -o options or --options), with corresponding
- * flags */
-
+// Standard mount options (from -o options or --options),
+// with corresponding flags
static const int32_t mount_options[] = {
// MS_FLAGS set a bit. ~MS_FLAGS disable that bit. 0 flags are NOPs.
- USE_FEATURE_MOUNT_LOOP(
+ IF_FEATURE_MOUNT_LOOP(
/* "loop" */ 0,
)
- USE_FEATURE_MOUNT_FSTAB(
+ IF_FEATURE_MOUNT_FSTAB(
/* "defaults" */ 0,
/* "quiet" 0 - do not filter out, vfat wants to see it */
/* "noauto" */ MOUNT_NOAUTO,
/* "sw" */ MOUNT_SWAP,
/* "swap" */ MOUNT_SWAP,
- USE_DESKTOP(/* "user" */ MOUNT_USERS,)
- USE_DESKTOP(/* "users" */ MOUNT_USERS,)
+ IF_DESKTOP(/* "user" */ MOUNT_USERS,)
+ IF_DESKTOP(/* "users" */ MOUNT_USERS,)
/* "_netdev" */ 0,
+ IF_DESKTOP(/* "comment=" */ 0,) /* systemd uses this in fstab */
)
- USE_FEATURE_MOUNT_FLAGS(
+ IF_FEATURE_MOUNT_FLAGS(
// vfs flags
/* "nosuid" */ MS_NOSUID,
/* "suid" */ ~MS_NOSUID,
/* "noatime" */ MS_NOATIME,
/* "diratime" */ ~MS_NODIRATIME,
/* "nodiratime" */ MS_NODIRATIME,
+ /* "mand" */ MS_MANDLOCK,
+ /* "nomand" */ ~MS_MANDLOCK,
+ /* "relatime" */ MS_RELATIME,
+ /* "norelatime" */ ~MS_RELATIME,
+ /* "strictatime" */ MS_STRICTATIME,
/* "loud" */ ~MS_SILENT,
+ /* "rbind" */ MS_BIND|MS_RECURSIVE,
// action flags
+ /* "union" */ MS_UNION,
/* "bind" */ MS_BIND,
/* "move" */ MS_MOVE,
/* "shared" */ MS_SHARED,
/* "unbindable" */ MS_UNBINDABLE,
/* "rshared" */ MS_SHARED|MS_RECURSIVE,
/* "rslave" */ MS_SLAVE|MS_RECURSIVE,
- /* "rprivate" */ MS_SLAVE|MS_RECURSIVE,
+ /* "rprivate" */ MS_PRIVATE|MS_RECURSIVE,
/* "runbindable" */ MS_UNBINDABLE|MS_RECURSIVE,
)
};
static const char mount_option_str[] =
- USE_FEATURE_MOUNT_LOOP(
- "loop" "\0"
+ IF_FEATURE_MOUNT_LOOP(
+ "loop\0"
)
- USE_FEATURE_MOUNT_FSTAB(
- "defaults" "\0"
- /* "quiet" "\0" - do not filter out, vfat wants to see it */
- "noauto" "\0"
- "sw" "\0"
- "swap" "\0"
- USE_DESKTOP("user" "\0")
- USE_DESKTOP("users" "\0")
- "_netdev" "\0"
+ IF_FEATURE_MOUNT_FSTAB(
+ "defaults\0"
+ // "quiet\0" - do not filter out, vfat wants to see it
+ "noauto\0"
+ "sw\0"
+ "swap\0"
+ IF_DESKTOP("user\0")
+ IF_DESKTOP("users\0")
+ "_netdev\0"
+ IF_DESKTOP("comment=\0") /* systemd uses this in fstab */
)
- USE_FEATURE_MOUNT_FLAGS(
+ IF_FEATURE_MOUNT_FLAGS(
// vfs flags
- "nosuid" "\0"
- "suid" "\0"
- "dev" "\0"
- "nodev" "\0"
- "exec" "\0"
- "noexec" "\0"
- "sync" "\0"
- "dirsync" "\0"
- "async" "\0"
- "atime" "\0"
- "noatime" "\0"
- "diratime" "\0"
- "nodiratime" "\0"
- "loud" "\0"
+ "nosuid\0"
+ "suid\0"
+ "dev\0"
+ "nodev\0"
+ "exec\0"
+ "noexec\0"
+ "sync\0"
+ "dirsync\0"
+ "async\0"
+ "atime\0"
+ "noatime\0"
+ "diratime\0"
+ "nodiratime\0"
+ "mand\0"
+ "nomand\0"
+ "relatime\0"
+ "norelatime\0"
+ "strictatime\0"
+ "loud\0"
+ "rbind\0"
// action flags
- "bind" "\0"
- "move" "\0"
- "shared" "\0"
- "slave" "\0"
- "private" "\0"
- "unbindable" "\0"
- "rshared" "\0"
- "rslave" "\0"
- "rprivate" "\0"
- "runbindable" "\0"
+ "union\0"
+ "bind\0"
+ "move\0"
+ "make-shared\0"
+ "make-slave\0"
+ "make-private\0"
+ "make-unbindable\0"
+ "make-rshared\0"
+ "make-rslave\0"
+ "make-rprivate\0"
+ "make-runbindable\0"
)
// Always understood.
- "ro" "\0" // vfs flag
- "rw" "\0" // vfs flag
- "remount" "\0" // action flag
+ "ro\0" // vfs flag
+ "rw\0" // vfs flag
+ "remount\0" // action flag
;
#endif
llist_t *fslist;
char getmntent_buf[1];
-
-};
+} FIX_ALIASING;
enum { GETMNTENT_BUFSIZE = COMMON_BUFSIZE - offsetof(struct globals, getmntent_buf) };
#define G (*(struct globals*)&bb_common_bufsiz1)
#define nfs_mount_version (G.nfs_mount_version)
#endif
#define fslist (G.fslist )
#define getmntent_buf (G.getmntent_buf )
+#define INIT_G() do { } while (0)
+
+#if ENABLE_FEATURE_MTAB_SUPPORT
+/*
+ * update_mtab_entry_on_move() is used to update entry in case of mount --move.
+ * we are looking for existing entries mnt_dir which is equal to mnt_fsname of
+ * input mntent and replace it by new one.
+ */
+static void FAST_FUNC update_mtab_entry_on_move(const struct mntent *mp)
+{
+ struct mntent *entries, *m;
+ int i, count;
+ FILE *mountTable;
+
+ mountTable = setmntent(bb_path_mtab_file, "r");
+ if (!mountTable) {
+ bb_perror_msg(bb_path_mtab_file);
+ return;
+ }
+
+ entries = NULL;
+ count = 0;
+ while ((m = getmntent(mountTable)) != NULL) {
+ entries = xrealloc_vector(entries, 3, count);
+ entries[count].mnt_fsname = xstrdup(m->mnt_fsname);
+ entries[count].mnt_dir = xstrdup(m->mnt_dir);
+ entries[count].mnt_type = xstrdup(m->mnt_type);
+ entries[count].mnt_opts = xstrdup(m->mnt_opts);
+ entries[count].mnt_freq = m->mnt_freq;
+ entries[count].mnt_passno = m->mnt_passno;
+ count++;
+ }
+ endmntent(mountTable);
+
+ mountTable = setmntent(bb_path_mtab_file, "w");
+ if (mountTable) {
+ for (i = 0; i < count; i++) {
+ if (strcmp(entries[i].mnt_dir, mp->mnt_fsname) != 0)
+ addmntent(mountTable, &entries[i]);
+ else
+ addmntent(mountTable, mp);
+ }
+ endmntent(mountTable);
+ } else if (errno != EROFS)
+ bb_perror_msg(bb_path_mtab_file);
+ if (ENABLE_FEATURE_CLEAN_UP) {
+ for (i = 0; i < count; i++) {
+ free(entries[i].mnt_fsname);
+ free(entries[i].mnt_dir);
+ free(entries[i].mnt_type);
+ free(entries[i].mnt_opts);
+ }
+ free(entries);
+ }
+}
+#endif
#if ENABLE_FEATURE_MOUNT_VERBOSE
static int verbose_mount(const char *source, const char *target,
#define verbose_mount(...) mount(__VA_ARGS__)
#endif
-static int resolve_mount_spec(char **fsname)
-{
- char *tmp = NULL;
-
-#if ENABLE_FEATURE_MOUNT_LABEL
- if (!strncmp(*fsname, "UUID=", 5))
- tmp = get_devname_from_uuid(*fsname + 5);
- else if (!strncmp(*fsname, "LABEL=", 6))
- tmp = get_devname_from_label(*fsname + 6);
-#endif
-
- if (tmp) {
- *fsname = tmp;
- return 1;
- }
- return 0;
-}
-
-/* Append mount options to string */
+// Append mount options to string
static void append_mount_options(char **oldopts, const char *newopts)
{
if (*oldopts && **oldopts) {
- /* do not insert options which are already there */
+ // Do not insert options which are already there
while (newopts[0]) {
char *p;
int len = strlen(newopts);
}
}
-/* Use the mount_options list to parse options into flags.
- * Also return list of unrecognized options if unrecognized!=NULL */
-static long parse_mount_options(char *options, char **unrecognized)
+// Use the mount_options list to parse options into flags.
+// Also update list of unrecognized options if unrecognized != NULL
+static unsigned long parse_mount_options(char *options, char **unrecognized)
{
- long flags = MS_SILENT;
+ unsigned long flags = MS_SILENT;
// Loop through options
for (;;) {
if (comma) *comma = '\0';
+// FIXME: use hasmntopt()
// Find this option in mount_options
for (i = 0; i < ARRAY_SIZE(mount_options); i++) {
- if (!strcasecmp(option_str, options)) {
- long fl = mount_options[i];
- if (fl < 0) flags &= fl;
- else flags |= fl;
- break;
+ unsigned opt_len = strlen(option_str);
+
+ if (strncasecmp(option_str, options, opt_len) == 0
+ && (options[opt_len] == '\0'
+ /* or is it "comment=" thingy in fstab? */
+ IF_FEATURE_MOUNT_FSTAB(IF_DESKTOP( || option_str[opt_len-1] == '=' ))
+ )
+ ) {
+ unsigned long fl = mount_options[i];
+ if (fl & BB_MS_INVERTED_VALUE)
+ flags &= fl;
+ else
+ flags |= fl;
+ goto found;
}
- option_str += strlen(option_str) + 1;
+ option_str += opt_len + 1;
}
- // If unrecognized not NULL, append unrecognized mount options */
- if (unrecognized && i == ARRAY_SIZE(mount_options)) {
+ // We did not recognize this option.
+ // If "unrecognized" is not NULL, append option there.
+ // Note that we should not append *empty* option -
+ // in this case we want to pass NULL, not "", to "data"
+ // parameter of mount(2) syscall.
+ // This is crucial for filesystems that don't accept
+ // any arbitrary mount options, like cgroup fs:
+ // "mount -t cgroup none /mnt"
+ if (options[0] && unrecognized) {
// Add it to strflags, to pass on to kernel
- i = *unrecognized ? strlen(*unrecognized) : 0;
- *unrecognized = xrealloc(*unrecognized, i+strlen(options)+2);
+ char *p = *unrecognized;
+ unsigned len = p ? strlen(p) : 0;
+ *unrecognized = p = xrealloc(p, len + strlen(options) + 2);
// Comma separated if it's not the first one
- if (i) (*unrecognized)[i++] = ',';
- strcpy((*unrecognized)+i, options);
+ if (len) p[len++] = ',';
+ strcpy(p + len, options);
}
-
+ found:
if (!comma)
break;
// Advance to next option
}
// Return a list of all block device backed filesystems
-
static llist_t *get_block_backed_filesystems(void)
{
static const char filesystems[2][sizeof("/proc/filesystems")] = {
"/proc/filesystems",
};
char *fs, *buf;
- llist_t *list = 0;
+ llist_t *list = NULL;
int i;
FILE *f;
for (i = 0; i < 2; i++) {
- f = fopen(filesystems[i], "r");
+ f = fopen_for_read(filesystems[i]);
if (!f) continue;
while ((buf = xmalloc_fgetline(f)) != NULL) {
- if (!strncmp(buf, "nodev", 5) && isspace(buf[5]))
- continue;
+ if (strncmp(buf, "nodev", 5) == 0 && isspace(buf[5]))
+ goto next;
fs = skip_whitespace(buf);
- if (*fs=='#' || *fs=='*' || !*fs) continue;
+ if (*fs == '#' || *fs == '*' || !*fs)
+ goto next;
llist_add_to_end(&list, xstrdup(fs));
+ next:
free(buf);
}
if (ENABLE_FEATURE_CLEAN_UP) fclose(f);
// Perform actual mount of specific filesystem at specific location.
// NB: mp->xxx fields may be trashed on exit
-static int mount_it_now(struct mntent *mp, long vfsflags, char *filteropts)
+static int mount_it_now(struct mntent *mp, unsigned long vfsflags, char *filteropts)
{
int rc = 0;
- if (fakeIt) {
+ if (FAKE_IT) {
if (verbose >= 2)
bb_error_msg("would do mount('%s','%s','%s',0x%08lx,'%s')",
mp->mnt_fsname, mp->mnt_dir, mp->mnt_type,
vfsflags, filteropts);
// If mount failed, try
- // helper program <mnt_type>
- if (ENABLE_FEATURE_MOUNT_HELPERS && rc) {
- char *args[6];
+ // helper program mount.<mnt_type>
+ if (HELPERS_ALLOWED && rc && mp->mnt_type) {
+ char *args[8];
int errno_save = errno;
args[0] = xasprintf("mount.%s", mp->mnt_type);
rc = 1;
+ if (FAKE_IT)
+ args[rc++] = (char *)"-f";
+ if (ENABLE_FEATURE_MTAB_SUPPORT && !USE_MTAB)
+ args[rc++] = (char *)"-n";
+ args[rc++] = mp->mnt_fsname;
+ args[rc++] = mp->mnt_dir;
if (filteropts) {
args[rc++] = (char *)"-o";
args[rc++] = filteropts;
}
- args[rc++] = mp->mnt_fsname;
- args[rc++] = mp->mnt_dir;
args[rc] = NULL;
- rc = wait4pid(spawn(args));
+ rc = spawn_and_wait(args);
free(args[0]);
if (!rc)
break;
if (rc && errno == EPERM)
bb_error_msg_and_die(bb_msg_perm_denied_are_you_root);
- /* If the mount was successful, and we're maintaining an old-style
- * mtab file by hand, add the new entry to it now. */
+ // If the mount was successful, and we're maintaining an old-style
+ // mtab file by hand, add the new entry to it now.
mtab:
- if (useMtab && !rc && !(vfsflags & MS_REMOUNT)) {
+ if (USE_MTAB && !rc && !(vfsflags & MS_REMOUNT)) {
char *fsname;
FILE *mountTable = setmntent(bb_path_mtab_file, "a+");
const char *option_str = mount_option_str;
int i;
if (!mountTable) {
- bb_error_msg("no %s", bb_path_mtab_file);
+ bb_perror_msg(bb_path_mtab_file);
goto ret;
}
// Add vfs string flags
-
for (i = 0; mount_options[i] != MS_REMOUNT; i++) {
if (mount_options[i] > 0 && (mount_options[i] & vfsflags))
append_mount_options(&(mp->mnt_opts), option_str);
}
// Remove trailing / (if any) from directory we mounted on
-
i = strlen(mp->mnt_dir) - 1;
- if (i > 0 && mp->mnt_dir[i] == '/') mp->mnt_dir[i] = '\0';
+ while (i > 0 && mp->mnt_dir[i] == '/')
+ mp->mnt_dir[i--] = '\0';
// Convert to canonical pathnames as needed
-
mp->mnt_dir = bb_simplify_path(mp->mnt_dir);
- fsname = 0;
- if (!mp->mnt_type || !*mp->mnt_type) { /* bind mount */
+ fsname = NULL;
+ if (!mp->mnt_type || !*mp->mnt_type) { // bind mount
mp->mnt_fsname = fsname = bb_simplify_path(mp->mnt_fsname);
mp->mnt_type = (char*)"bind";
}
mp->mnt_freq = mp->mnt_passno = 0;
- // Write and close.
-
- addmntent(mountTable, mp);
+ // Write and close
+#if ENABLE_FEATURE_MTAB_SUPPORT
+ if (vfsflags & MS_MOVE)
+ update_mtab_entry_on_move(mp);
+ else
+#endif
+ addmntent(mountTable, mp);
endmntent(mountTable);
+
if (ENABLE_FEATURE_CLEAN_UP) {
free(mp->mnt_dir);
free(fsname);
* Linux NFS mount
* Copyright (C) 1993 Rick Sladkey <jrs@world.std.com>
*
- * Licensed under GPLv2, see file LICENSE in this tarball for details.
+ * Licensed under GPLv2, see file LICENSE in this source tree.
*
* Wed Feb 8 12:51:48 1995, biro@yggdrasil.com (Ross Biro): allow all port
* numbers to be specified on the command line.
* plus NFSv3 stuff.
*/
-/* This is just a warning of a common mistake. Possibly this should be a
- * uclibc faq entry rather than in busybox... */
-#if defined(__UCLIBC__) && ! defined(__UCLIBC_HAS_RPC__)
-#error "You need to build uClibc with UCLIBC_HAS_RPC for NFS support."
-#endif
-
#define MOUNTPORT 635
#define MNTPATHLEN 1024
#define MNTNAMLEN 255
*/
struct nfs2_fh {
- char data[32];
+ char data[32];
};
struct nfs3_fh {
- unsigned short size;
- unsigned char data[64];
+ unsigned short size;
+ unsigned char data[64];
};
struct nfs_mount_data {
- int version; /* 1 */
- int fd; /* 1 */
- struct nfs2_fh old_root; /* 1 */
- int flags; /* 1 */
- int rsize; /* 1 */
- int wsize; /* 1 */
- int timeo; /* 1 */
- int retrans; /* 1 */
- int acregmin; /* 1 */
- int acregmax; /* 1 */
- int acdirmin; /* 1 */
- int acdirmax; /* 1 */
- struct sockaddr_in addr; /* 1 */
- char hostname[256]; /* 1 */
- int namlen; /* 2 */
- unsigned int bsize; /* 3 */
- struct nfs3_fh root; /* 4 */
+ int version; /* 1 */
+ int fd; /* 1 */
+ struct nfs2_fh old_root; /* 1 */
+ int flags; /* 1 */
+ int rsize; /* 1 */
+ int wsize; /* 1 */
+ int timeo; /* 1 */
+ int retrans; /* 1 */
+ int acregmin; /* 1 */
+ int acregmax; /* 1 */
+ int acdirmin; /* 1 */
+ int acdirmax; /* 1 */
+ struct sockaddr_in addr; /* 1 */
+ char hostname[256]; /* 1 */
+ int namlen; /* 2 */
+ unsigned int bsize; /* 3 */
+ struct nfs3_fh root; /* 4 */
};
/* bits in the flags field */
NFS_MOUNT_TCP = 0x0040, /* 2 */
NFS_MOUNT_VER3 = 0x0080, /* 3 */
NFS_MOUNT_KERBEROS = 0x0100, /* 3 */
- NFS_MOUNT_NONLM = 0x0200 /* 3 */
+ NFS_MOUNT_NONLM = 0x0200, /* 3 */
+ NFS_MOUNT_NOACL = 0x0800, /* 4 */
+ NFS_MOUNT_NORDIRPLUS = 0x4000
};
* "after #include <errno.h> the symbol errno is reserved for any use,
* it cannot even be used as a struct tag or field name".
*/
-
#ifndef EDQUOT
-#define EDQUOT ENOSPC
+# define EDQUOT ENOSPC
#endif
-
-// Convert each NFSERR_BLAH into EBLAH
-
-static const struct {
- short stat;
- short errnum;
-} nfs_errtbl[] = {
- {0,0}, {1,EPERM}, {2,ENOENT}, {5,EIO}, {6,ENXIO}, {13,EACCES}, {17,EEXIST},
- {19,ENODEV}, {20,ENOTDIR}, {21,EISDIR}, {22,EINVAL}, {27,EFBIG},
- {28,ENOSPC}, {30,EROFS}, {63,ENAMETOOLONG}, {66,ENOTEMPTY}, {69,EDQUOT},
- {70,ESTALE}, {71,EREMOTE}, {-1,EIO}
+/* Convert each NFSERR_BLAH into EBLAH */
+static const uint8_t nfs_err_stat[] = {
+ 1, 2, 5, 6, 13, 17,
+ 19, 20, 21, 22, 27, 28,
+ 30, 63, 66, 69, 70, 71
+};
+#if ( \
+ EPERM | ENOENT | EIO | ENXIO | EACCES| EEXIST | \
+ ENODEV| ENOTDIR | EISDIR | EINVAL| EFBIG | ENOSPC | \
+ EROFS | ENAMETOOLONG| ENOTEMPTY| EDQUOT| ESTALE| EREMOTE) < 256
+typedef uint8_t nfs_err_type;
+#else
+typedef uint16_t nfs_err_type;
+#endif
+static const nfs_err_type nfs_err_errnum[] = {
+ EPERM , ENOENT , EIO , ENXIO , EACCES, EEXIST,
+ ENODEV, ENOTDIR , EISDIR , EINVAL, EFBIG , ENOSPC,
+ EROFS , ENAMETOOLONG, ENOTEMPTY, EDQUOT, ESTALE, EREMOTE
};
-
static char *nfs_strerror(int status)
{
int i;
- for (i = 0; nfs_errtbl[i].stat != -1; i++) {
- if (nfs_errtbl[i].stat == status)
- return strerror(nfs_errtbl[i].errnum);
+ for (i = 0; i < ARRAY_SIZE(nfs_err_stat); i++) {
+ if (nfs_err_stat[i] == status)
+ return strerror(nfs_err_errnum[i]);
}
return xasprintf("unknown nfs status return value: %d", status);
}
static bool_t xdr_fhandle(XDR *xdrs, fhandle objp)
{
- if (!xdr_opaque(xdrs, objp, FHSIZE))
- return FALSE;
- return TRUE;
+ return xdr_opaque(xdrs, objp, FHSIZE);
}
static bool_t xdr_fhstatus(XDR *xdrs, fhstatus *objp)
{
if (!xdr_u_int(xdrs, &objp->fhs_status))
- return FALSE;
- switch (objp->fhs_status) {
- case 0:
- if (!xdr_fhandle(xdrs, objp->fhstatus_u.fhs_fhandle))
- return FALSE;
- break;
- default:
- break;
- }
+ return FALSE;
+ if (objp->fhs_status == 0)
+ return xdr_fhandle(xdrs, objp->fhstatus_u.fhs_fhandle);
return TRUE;
}
static bool_t xdr_dirpath(XDR *xdrs, dirpath *objp)
{
- if (!xdr_string(xdrs, objp, MNTPATHLEN))
- return FALSE;
- return TRUE;
+ return xdr_string(xdrs, objp, MNTPATHLEN);
}
static bool_t xdr_fhandle3(XDR *xdrs, fhandle3 *objp)
{
- if (!xdr_bytes(xdrs, (char **)&objp->fhandle3_val, (unsigned int *) &objp->fhandle3_len, FHSIZE3))
- return FALSE;
- return TRUE;
+ return xdr_bytes(xdrs, (char **)&objp->fhandle3_val,
+ (unsigned int *) &objp->fhandle3_len,
+ FHSIZE3);
}
static bool_t xdr_mountres3_ok(XDR *xdrs, mountres3_ok *objp)
{
if (!xdr_fhandle3(xdrs, &objp->fhandle))
return FALSE;
- if (!xdr_array(xdrs, &(objp->auth_flavours.auth_flavours_val), &(objp->auth_flavours.auth_flavours_len), ~0,
- sizeof (int), (xdrproc_t) xdr_int))
- return FALSE;
- return TRUE;
+ return xdr_array(xdrs, &(objp->auth_flavours.auth_flavours_val),
+ &(objp->auth_flavours.auth_flavours_len),
+ ~0,
+ sizeof(int),
+ (xdrproc_t) xdr_int);
}
static bool_t xdr_mountstat3(XDR *xdrs, mountstat3 *objp)
{
- if (!xdr_enum(xdrs, (enum_t *) objp))
- return FALSE;
- return TRUE;
+ return xdr_enum(xdrs, (enum_t *) objp);
}
static bool_t xdr_mountres3(XDR *xdrs, mountres3 *objp)
{
if (!xdr_mountstat3(xdrs, &objp->fhs_status))
return FALSE;
- switch (objp->fhs_status) {
- case MNT_OK:
- if (!xdr_mountres3_ok(xdrs, &objp->mountres3_u.mountinfo))
- return FALSE;
- break;
- default:
- break;
- }
+ if (objp->fhs_status == MNT_OK)
+ return xdr_mountres3_ok(xdrs, &objp->mountres3_u.mountinfo);
return TRUE;
}
kernel_version = get_linux_version_code();
if (kernel_version) {
- if (kernel_version < KERNEL_VERSION(2,1,32))
- nfs_mount_version = 1;
- else if (kernel_version < KERNEL_VERSION(2,2,18) ||
- (kernel_version >= KERNEL_VERSION(2,3,0) &&
- kernel_version < KERNEL_VERSION(2,3,99)))
+ if (kernel_version < KERNEL_VERSION(2,2,18))
nfs_mount_version = 3;
/* else v4 since 2.3.99pre4 */
}
goto next;
if (version && version <= 2 && pmap->pml_map.pm_vers > 2)
goto next;
- if (pmap->pml_map.pm_vers > MAX_NFSPROT ||
- (proto && pm_mnt->pm_prot && pmap->pml_map.pm_prot != proto) ||
- (port && pmap->pml_map.pm_port != port))
+ if (pmap->pml_map.pm_vers > MAX_NFSPROT
+ || (proto && pm_mnt->pm_prot && pmap->pml_map.pm_prot != proto)
+ || (port && pmap->pml_map.pm_port != port)
+ ) {
goto next;
+ }
memcpy(pm_mnt, &pmap->pml_map, sizeof(*pm_mnt));
next:
pmap = pmap->pml_next;
#if BB_MMU
static int daemonize(void)
{
- int fd;
int pid = fork();
if (pid < 0) /* error */
return -errno;
if (pid > 0) /* parent */
return 0;
/* child */
- fd = xopen(bb_dev_null, O_RDWR);
- dup2(fd, 0);
- dup2(fd, 1);
- dup2(fd, 2);
- while (fd > 2) close(fd--);
+ close(0);
+ xopen(bb_dev_null, O_RDWR);
+ xdup2(0, 1);
+ xdup2(0, 2);
setsid();
openlog(applet_name, LOG_PID, LOG_DAEMON);
logmode = LOGMODE_SYSLOG;
static inline int daemonize(void) { return -ENOSYS; }
#endif
-// TODO
-static inline int we_saw_this_host_before(const char *hostname ATTRIBUTE_UNUSED)
+/* TODO */
+static inline int we_saw_this_host_before(const char *hostname UNUSED_PARAM)
{
return 0;
}
bb_error_msg("%.*s", len, msg);
}
-// NB: mp->xxx fields may be trashed on exit
-static int nfsmount(struct mntent *mp, long vfsflags, char *filteropts)
+/* NB: mp->xxx fields may be trashed on exit */
+static NOINLINE int nfsmount(struct mntent *mp, unsigned long vfsflags, char *filteropts)
{
CLIENT *mclient;
char *hostname;
char *pathname;
char *mounthost;
+ /* prior to 2.6.23, kernel took NFS options in a form of this struct
+ * only. 2.6.23+ looks at data->version, and if it's not 1..6,
+ * then data pointer is interpreted as a string. */
struct nfs_mount_data data;
char *opt;
struct hostent *hp;
int mountport;
int proto;
#if BB_MMU
- int bg = 0;
+ smallint bg = 0;
#else
enum { bg = 0 };
#endif
- int soft;
- int intr;
- int posix;
- int nocto;
- int noac;
- int nolock;
int retry;
- int tcp;
int mountprog;
int mountvers;
int nfsprog;
int nfsvers;
int retval;
+ /* these all are one-bit really. gcc 4.3.1 likes this combination: */
+ smallint tcp;
+ smallint soft;
+ int intr;
+ int posix;
+ int nocto;
+ int noac;
+ int nordirplus;
+ int nolock;
+ int noacl;
find_kernel_nfs_mount_version();
pathname = s + 1;
*s = '\0';
/* Ignore all but first hostname in replicated mounts
- until they can be fully supported. (mack@sgi.com) */
+ * until they can be fully supported. (mack@sgi.com) */
s = strchr(hostname, ',');
if (s) {
*s = '\0';
bb_herror_msg("%s", hostname);
goto fail;
}
- if ((size_t)hp->h_length > sizeof(struct in_addr)) {
- bb_error_msg("got bad hp->h_length");
- hp->h_length = sizeof(struct in_addr);
+ if (hp->h_length != (int)sizeof(struct in_addr)) {
+ bb_error_msg_and_die("only IPv4 is supported");
}
- memcpy(&server_addr.sin_addr,
- hp->h_addr, hp->h_length);
+ memcpy(&server_addr.sin_addr, hp->h_addr_list[0], sizeof(struct in_addr));
}
memcpy(&mount_server_addr, &server_addr, sizeof(mount_server_addr));
* let the kernel decide.
* timeo is filled in after we know whether it'll be TCP or UDP. */
memset(&data, 0, sizeof(data));
- data.retrans = 3;
- data.acregmin = 3;
- data.acregmax = 60;
- data.acdirmin = 30;
- data.acdirmax = 60;
- data.namlen = NAME_MAX;
+ data.retrans = 3;
+ data.acregmin = 3;
+ data.acregmax = 60;
+ data.acdirmin = 30;
+ data.acdirmax = 60;
+ data.namlen = NAME_MAX;
soft = 0;
intr = 0;
nocto = 0;
nolock = 0;
noac = 0;
+ nordirplus = 0;
+ noacl = 0;
retry = 10000; /* 10000 minutes ~ 1 week */
- tcp = 0;
+ tcp = 1; /* nfs-utils uses tcp per default */
mountprog = MOUNTPROG;
mountvers = 0;
if (filteropts) for (opt = strtok(filteropts, ","); opt; opt = strtok(NULL, ",")) {
char *opteq = strchr(opt, '=');
if (opteq) {
+ int val, idx;
static const char options[] ALIGN1 =
/* 0 */ "rsize\0"
/* 1 */ "wsize\0"
/* 18 */ "proto\0"
/* 19 */ "namlen\0"
/* 20 */ "addr\0";
- int val = xatoi_u(opteq + 1);
- *opteq = '\0';
- switch (index_in_strings(options, opt)) {
+
+ *opteq++ = '\0';
+ idx = index_in_strings(options, opt);
+ switch (idx) {
+ case 12: // "mounthost"
+ mounthost = xstrndup(opteq,
+ strcspn(opteq, " \t\n\r,"));
+ continue;
+ case 18: // "proto"
+ if (!strncmp(opteq, "tcp", 3))
+ tcp = 1;
+ else if (!strncmp(opteq, "udp", 3))
+ tcp = 0;
+ else
+ bb_error_msg("warning: unrecognized proto= option");
+ continue;
+ case 20: // "addr" - ignore
+ continue;
+ case -1: // unknown
+ if (vfsflags & MS_REMOUNT)
+ continue;
+ }
+
+ val = xatoi_positive(opteq);
+ switch (idx) {
case 0: // "rsize"
data.rsize = val;
- break;
+ continue;
case 1: // "wsize"
data.wsize = val;
- break;
+ continue;
case 2: // "timeo"
data.timeo = val;
- break;
+ continue;
case 3: // "retrans"
data.retrans = val;
- break;
+ continue;
case 4: // "acregmin"
data.acregmin = val;
- break;
+ continue;
case 5: // "acregmax"
data.acregmax = val;
- break;
+ continue;
case 6: // "acdirmin"
data.acdirmin = val;
- break;
+ continue;
case 7: // "acdirmax"
data.acdirmax = val;
- break;
+ continue;
case 8: // "actimeo"
data.acregmin = val;
data.acregmax = val;
data.acdirmin = val;
data.acdirmax = val;
- break;
+ continue;
case 9: // "retry"
retry = val;
- break;
+ continue;
case 10: // "port"
port = val;
- break;
+ continue;
case 11: // "mountport"
mountport = val;
- break;
- case 12: // "mounthost"
- mounthost = xstrndup(opteq+1,
- strcspn(opteq+1," \t\n\r,"));
- break;
+ continue;
case 13: // "mountprog"
mountprog = val;
- break;
+ continue;
case 14: // "mountvers"
mountvers = val;
- break;
+ continue;
case 15: // "nfsprog"
nfsprog = val;
- break;
+ continue;
case 16: // "nfsvers"
case 17: // "vers"
nfsvers = val;
- break;
- case 18: // "proto"
- if (!strncmp(opteq+1, "tcp", 3))
- tcp = 1;
- else if (!strncmp(opteq+1, "udp", 3))
- tcp = 0;
- else
- bb_error_msg("warning: unrecognized proto= option");
- break;
+ continue;
case 19: // "namlen"
- if (nfs_mount_version >= 2)
+ //if (nfs_mount_version >= 2)
data.namlen = val;
- else
- bb_error_msg("warning: option namlen is not supported\n");
- break;
- case 20: // "addr" - ignore
- break;
+ //else
+ // bb_error_msg("warning: option namlen is not supported\n");
+ continue;
default:
bb_error_msg("unknown nfs mount parameter: %s=%d", opt, val);
goto fail;
}
}
- else {
+ else { /* not of the form opt=val */
static const char options[] ALIGN1 =
"bg\0"
"fg\0"
"ac\0"
"tcp\0"
"udp\0"
- "lock\0";
+ "lock\0"
+ "rdirplus\0"
+ "acl\0";
int val = 1;
if (!strncmp(opt, "no", 2)) {
val = 0;
else
bb_error_msg("warning: option nolock is not supported");
break;
+ case 11: //rdirplus
+ nordirplus = !val;
+ break;
+ case 12: // acl
+ noacl = !val;
+ break;
default:
bb_error_msg("unknown nfs mount option: %s%s", val ? "" : "no", opt);
goto fail;
| (intr ? NFS_MOUNT_INTR : 0)
| (posix ? NFS_MOUNT_POSIX : 0)
| (nocto ? NFS_MOUNT_NOCTO : 0)
- | (noac ? NFS_MOUNT_NOAC : 0);
+ | (noac ? NFS_MOUNT_NOAC : 0)
+ | (nordirplus ? NFS_MOUNT_NORDIRPLUS : 0)
+ | (noacl ? NFS_MOUNT_NOACL : 0);
if (nfs_mount_version >= 2)
data.flags |= (tcp ? NFS_MOUNT_TCP : 0);
if (nfs_mount_version >= 3)
}
}
- /* create mount daemon client */
+ /* Create mount daemon client */
/* See if the nfs host = mount host. */
if (mounthost) {
if (mounthost[0] >= '0' && mounthost[0] <= '9') {
bb_herror_msg("%s", mounthost);
goto fail;
}
- if ((size_t)hp->h_length > sizeof(struct in_addr)) {
- bb_error_msg("got bad hp->h_length");
- hp->h_length = sizeof(struct in_addr);
+ if (hp->h_length != (int)sizeof(struct in_addr)) {
+ bb_error_msg_and_die("only IPv4 is supported");
}
mount_server_addr.sin_family = AF_INET;
- memcpy(&mount_server_addr.sin_addr,
- hp->h_addr, hp->h_length);
+ memcpy(&mount_server_addr.sin_addr, hp->h_addr_list[0], sizeof(struct in_addr));
}
}
retry_timeout.tv_usec = 0;
total_timeout.tv_sec = 20;
total_timeout.tv_usec = 0;
+/* FIXME: use monotonic()? */
timeout = time(NULL) + 60 * retry;
prevt = 0;
t = 30;
retry:
- /* be careful not to use too many CPU cycles */
+ /* Be careful not to use too many CPU cycles */
if (t - prevt < 30)
sleep(30);
switch (pm_mnt.pm_prot) {
case IPPROTO_UDP:
mclient = clntudp_create(&mount_server_addr,
- pm_mnt.pm_prog,
- pm_mnt.pm_vers,
- retry_timeout,
- &msock);
+ pm_mnt.pm_prog,
+ pm_mnt.pm_vers,
+ retry_timeout,
+ &msock);
if (mclient)
break;
mount_server_addr.sin_port = htons(pm_mnt.pm_port);
msock = RPC_ANYSOCK;
case IPPROTO_TCP:
mclient = clnttcp_create(&mount_server_addr,
- pm_mnt.pm_prog,
- pm_mnt.pm_vers,
- &msock, 0, 0);
+ pm_mnt.pm_prog,
+ pm_mnt.pm_vers,
+ &msock, 0, 0);
break;
default:
mclient = NULL;
error_msg_rpc(clnt_spcreateerror(" "));
} else {
enum clnt_stat clnt_stat;
- /* try to mount hostname:pathname */
+
+ /* Try to mount hostname:pathname */
mclient->cl_auth = authunix_create_default();
- /* make pointers in xdr_mountres3 NULL so
+ /* Make pointers in xdr_mountres3 NULL so
* that xdr_array allocates memory for us
*/
memset(&status, 0, sizeof(status));
if (pm_mnt.pm_vers == 3)
clnt_stat = clnt_call(mclient, MOUNTPROC3_MNT,
- (xdrproc_t) xdr_dirpath,
- (caddr_t) &pathname,
- (xdrproc_t) xdr_mountres3,
- (caddr_t) &status,
- total_timeout);
+ (xdrproc_t) xdr_dirpath,
+ (caddr_t) &pathname,
+ (xdrproc_t) xdr_mountres3,
+ (caddr_t) &status,
+ total_timeout);
else
clnt_stat = clnt_call(mclient, MOUNTPROC_MNT,
- (xdrproc_t) xdr_dirpath,
- (caddr_t) &pathname,
- (xdrproc_t) xdr_fhstatus,
- (caddr_t) &status,
- total_timeout);
+ (xdrproc_t) xdr_dirpath,
+ (caddr_t) &pathname,
+ (xdrproc_t) xdr_fhstatus,
+ (caddr_t) &status,
+ total_timeout);
if (clnt_stat == RPC_SUCCESS)
goto prepare_kernel_data; /* we're done */
}
/* Timeout. We are going to retry... maybe */
-
if (!bg)
goto fail;
if (!daemonized) {
data.flags |= NFS_MOUNT_VER3;
}
- /* create nfs socket for kernel */
-
+ /* Create nfs socket for kernel */
if (tcp) {
if (nfs_mount_version < 3) {
bb_error_msg("NFS over TCP is not supported");
}
server_addr.sin_port = htons(port);
- /* prepare data structure for kernel */
-
+ /* Prepare data structure for kernel */
data.fd = fsock;
memcpy((char *) &data.addr, (char *) &server_addr, sizeof(data.addr));
strncpy(data.hostname, hostname, sizeof(data.hostname));
- /* clean up */
-
+ /* Clean up */
auth_destroy(mclient->cl_auth);
clnt_destroy(mclient);
close(msock);
if (!daemonized) {
daemonized = daemonize();
if (daemonized <= 0) { /* parent or error */
- // FIXME: parent doesn't close fsock - ??!
+/* FIXME: parent doesn't close fsock - ??! */
retval = -daemonized;
goto ret;
}
}
}
- do_mount: /* perform actual mount */
-
- mp->mnt_type = (char*)"nfs";
+ /* Perform actual mount */
+ do_mount:
retval = mount_it_now(mp, vfsflags, (char*)&data);
goto ret;
- fail: /* abort */
-
+ /* Abort */
+ fail:
if (msock >= 0) {
if (mclient) {
auth_destroy(mclient->cl_auth);
return retval;
}
-#else /* !ENABLE_FEATURE_MOUNT_NFS */
+#else // !ENABLE_FEATURE_MOUNT_NFS
-/* Never called. Call should be optimized out. */
-int nfsmount(struct mntent *mp, long vfsflags, char *filteropts);
+/* Linux 2.6.23+ supports nfs mounts with options passed as a string.
+ * For older kernels, you must build busybox with ENABLE_FEATURE_MOUNT_NFS.
+ * (However, note that then you lose any chances that NFS over IPv6 would work).
+ */
+static int nfsmount(struct mntent *mp, unsigned long vfsflags, char *filteropts)
+{
+ len_and_sockaddr *lsa;
+ char *opts;
+ char *end;
+ char *dotted;
+ int ret;
+
+# if ENABLE_FEATURE_IPV6
+ end = strchr(mp->mnt_fsname, ']');
+ if (end && end[1] == ':')
+ end++;
+ else
+# endif
+ /* mount_main() guarantees that ':' is there */
+ end = strchr(mp->mnt_fsname, ':');
+
+ *end = '\0';
+ lsa = xhost2sockaddr(mp->mnt_fsname, /*port:*/ 0);
+ *end = ':';
+ dotted = xmalloc_sockaddr2dotted_noport(&lsa->u.sa);
+ if (ENABLE_FEATURE_CLEAN_UP) free(lsa);
+ opts = xasprintf("%s%saddr=%s",
+ filteropts ? filteropts : "",
+ filteropts ? "," : "",
+ dotted
+ );
+ if (ENABLE_FEATURE_CLEAN_UP) free(dotted);
+ ret = mount_it_now(mp, vfsflags, opts);
+ if (ENABLE_FEATURE_CLEAN_UP) free(opts);
+
+ return ret;
+}
-#endif /* !ENABLE_FEATURE_MOUNT_NFS */
+#endif // !ENABLE_FEATURE_MOUNT_NFS
// Mount one directory. Handles CIFS, NFS, loopback, autobind, and filesystem
// type detection. Returns 0 for success, nonzero for failure.
static int singlemount(struct mntent *mp, int ignore_busy)
{
int rc = -1;
- long vfsflags;
- char *loopFile = 0, *filteropts = 0;
- llist_t *fl = 0;
+ unsigned long vfsflags;
+ char *loopFile = NULL, *filteropts = NULL;
+ llist_t *fl = NULL;
struct stat st;
- vfsflags = parse_mount_options(mp->mnt_opts, &filteropts);
+ errno = 0;
- // Treat fstype "auto" as unspecified.
+ vfsflags = parse_mount_options(mp->mnt_opts, &filteropts);
+ // Treat fstype "auto" as unspecified
if (mp->mnt_type && strcmp(mp->mnt_type, "auto") == 0)
mp->mnt_type = NULL;
// Might this be a virtual filesystem?
-
- if (ENABLE_FEATURE_MOUNT_HELPERS
- && (strchr(mp->mnt_fsname, '#'))
- ) {
- char *s, *p, *args[35];
- int n = 0;
-// FIXME: does it allow execution of arbitrary commands?!
-// What args[0] can end up with?
- for (s = p = mp->mnt_fsname; *s && n < 35-3; ++s) {
- if (s[0] == '#' && s[1] != '#') {
- *s = '\0';
- args[n++] = p;
- p = s + 1;
+ if (ENABLE_FEATURE_MOUNT_HELPERS && strchr(mp->mnt_fsname, '#')) {
+ char *args[35];
+ char *s;
+ int n;
+ // fsname: "cmd#arg1#arg2..."
+ // WARNING: allows execution of arbitrary commands!
+ // Try "mount 'sh#-c#sh' bogus_dir".
+ // It is safe ONLY because non-root
+ // cannot use two-argument mount command
+ // and using one-argument "mount 'sh#-c#sh'" doesn't work:
+ // "mount: can't find sh#-c#sh in /etc/fstab"
+ // (if /etc/fstab has it, it's ok: root sets up /etc/fstab).
+
+ s = mp->mnt_fsname;
+ n = 0;
+ args[n++] = s;
+ while (*s && n < 35 - 2) {
+ if (*s++ == '#' && *s != '#') {
+ s[-1] = '\0';
+ args[n++] = s;
}
}
- args[n++] = p;
args[n++] = mp->mnt_dir;
args[n] = NULL;
- rc = wait4pid(xspawn(args));
+ rc = spawn_and_wait(args);
goto report_error;
}
// Might this be an CIFS filesystem?
-
if (ENABLE_FEATURE_MOUNT_CIFS
&& (!mp->mnt_type || strcmp(mp->mnt_type, "cifs") == 0)
&& (mp->mnt_fsname[0] == '/' || mp->mnt_fsname[0] == '\\')
&& mp->mnt_fsname[0] == mp->mnt_fsname[1]
) {
+ int len;
+ char c;
+ char *hostname, *share;
+ char *dotted, *ip;
len_and_sockaddr *lsa;
- char *ip, *dotted;
- char *s;
-
- rc = 1;
- // Replace '/' with '\' and verify that unc points to "//server/share".
-
- for (s = mp->mnt_fsname; *s; ++s)
- if (*s == '/') *s = '\\';
- // get server IP
+ // Parse mp->mnt_fsname of the form "//hostname/share[/dir1/dir2]"
- s = strrchr(mp->mnt_fsname, '\\');
- if (s <= mp->mnt_fsname+1) goto report_error;
- *s = '\0';
- lsa = host2sockaddr(mp->mnt_fsname+2, 0);
- *s = '\\';
- if (!lsa) goto report_error;
+ hostname = mp->mnt_fsname + 2;
+ len = strcspn(hostname, "/\\");
+ share = hostname + len + 1;
+ if (len == 0 // 3rd char is a [back]slash (IOW: empty hostname)
+ || share[-1] == '\0' // no [back]slash after hostname
+ || share[0] == '\0' // empty share name
+ ) {
+ goto report_error;
+ }
+ c = share[-1];
+ share[-1] = '\0';
+ len = strcspn(share, "/\\");
+
+ // "unc=\\hostname\share" option is mandatory
+ // after CIFS option parsing was rewritten in Linux 3.4.
+ // Must use backslashes.
+ // If /dir1/dir2 is present, also add "prefixpath=dir1/dir2"
+ {
+ char *unc = xasprintf(
+ share[len] != '\0' /* "/dir1/dir2" exists? */
+ ? "unc=\\\\%s\\%.*s,prefixpath=%s"
+ : "unc=\\\\%s\\%.*s",
+ hostname,
+ len, share,
+ share + len + 1 /* "dir1/dir2" */
+ );
+ parse_mount_options(unc, &filteropts);
+ if (ENABLE_FEATURE_CLEAN_UP) free(unc);
+ }
- // insert ip=... option into string flags.
+ lsa = host2sockaddr(hostname, 0);
+ share[-1] = c;
+ if (!lsa)
+ goto report_error;
+ // Insert "ip=..." option into options
dotted = xmalloc_sockaddr2dotted_noport(&lsa->u.sa);
+ if (ENABLE_FEATURE_CLEAN_UP) free(lsa);
ip = xasprintf("ip=%s", dotted);
+ if (ENABLE_FEATURE_CLEAN_UP) free(dotted);
parse_mount_options(ip, &filteropts);
-
- // compose new unc '\\server-ip\share'
- // (s => slash after hostname)
-
- mp->mnt_fsname = xasprintf("\\\\%s%s", dotted, s);
-
- // lock is required
- vfsflags |= MS_MANDLOCK;
+ if (ENABLE_FEATURE_CLEAN_UP) free(ip);
mp->mnt_type = (char*)"cifs";
rc = mount_it_now(mp, vfsflags, filteropts);
- if (ENABLE_FEATURE_CLEAN_UP) {
- free(mp->mnt_fsname);
- free(ip);
- free(dotted);
- free(lsa);
- }
+
goto report_error;
}
// Might this be an NFS filesystem?
-
- if (ENABLE_FEATURE_MOUNT_NFS
- && (!mp->mnt_type || !strcmp(mp->mnt_type, "nfs"))
+ if ((!mp->mnt_type || strncmp(mp->mnt_type, "nfs", 3) == 0)
&& strchr(mp->mnt_fsname, ':') != NULL
) {
+ if (!mp->mnt_type)
+ mp->mnt_type = (char*)"nfs";
rc = nfsmount(mp, vfsflags, filteropts);
goto report_error;
}
// a synthetic filesystem like proc or sysfs.)
// (We use stat, not lstat, in order to allow
// mount symlink_to_file_or_blkdev dir)
-
if (!stat(mp->mnt_fsname, &st)
&& !(vfsflags & (MS_REMOUNT | MS_BIND | MS_MOVE))
) {
// Do we need to allocate a loopback device for it?
-
if (ENABLE_FEATURE_MOUNT_LOOP && S_ISREG(st.st_mode)) {
loopFile = bb_simplify_path(mp->mnt_fsname);
- mp->mnt_fsname = NULL; /* will receive malloced loop dev name */
- if (set_loop(&(mp->mnt_fsname), loopFile, 0) < 0) {
+ mp->mnt_fsname = NULL; // will receive malloced loop dev name
+ if (set_loop(&mp->mnt_fsname, loopFile, 0, /*ro:*/ (vfsflags & MS_RDONLY)) < 0) {
if (errno == EPERM || errno == EACCES)
bb_error_msg(bb_msg_perm_denied_are_you_root);
else
- bb_perror_msg("cannot setup loop device");
+ bb_perror_msg("can't setup loop device");
return errno;
}
// Autodetect bind mounts
-
} else if (S_ISDIR(st.st_mode) && !mp->mnt_type)
vfsflags |= MS_BIND;
}
- /* If we know the fstype (or don't need to), jump straight
- * to the actual mount. */
-
- if (mp->mnt_type || (vfsflags & (MS_REMOUNT | MS_BIND | MS_MOVE)))
- rc = mount_it_now(mp, vfsflags, filteropts);
- else {
+ // If we know the fstype (or don't need to), jump straight
+ // to the actual mount.
+ if (mp->mnt_type || (vfsflags & (MS_REMOUNT | MS_BIND | MS_MOVE))) {
+ char *next;
+ for (;;) {
+ next = mp->mnt_type ? strchr(mp->mnt_type, ',') : NULL;
+ if (next)
+ *next = '\0';
+ rc = mount_it_now(mp, vfsflags, filteropts);
+ if (rc == 0 || !next)
+ break;
+ mp->mnt_type = next + 1;
+ }
+ } else {
// Loop through filesystem types until mount succeeds
// or we run out
- /* Initialize list of block backed filesystems. This has to be
- * done here so that during "mount -a", mounts after /proc shows up
- * can autodetect. */
-
+ // Initialize list of block backed filesystems.
+ // This has to be done here so that during "mount -a",
+ // mounts after /proc shows up can autodetect.
if (!fslist) {
fslist = get_block_backed_filesystems();
if (ENABLE_FEATURE_CLEAN_UP && fslist)
for (fl = fslist; fl; fl = fl->link) {
mp->mnt_type = fl->data;
rc = mount_it_now(mp, vfsflags, filteropts);
- if (!rc) break;
+ if (rc == 0)
+ break;
}
}
// If mount failed, clean up loop file (if any).
-
if (ENABLE_FEATURE_MOUNT_LOOP && rc && loopFile) {
del_loop(mp->mnt_fsname);
if (ENABLE_FEATURE_CLEAN_UP) {
if (errno == EBUSY && ignore_busy)
return 0;
- if (rc < 0)
+ if (rc != 0)
bb_perror_msg("mounting %s on %s failed", mp->mnt_fsname, mp->mnt_dir);
return rc;
}
-// Parse options, if necessary parse fstab/mtab, and call singlemount for
-// each directory to be mounted.
+// -O support
+// -O interprets a list of filter options which select whether a mount
+// point will be mounted: only mounts with options matching *all* filtering
+// options will be selected.
+// By default each -O filter option must be present in the list of mount
+// options, but if it is prefixed by "no" then it must be absent.
+// For example,
+// -O a,nob,c matches -o a,c but fails to match -o a,b,c
+// (and also fails to match -o a because -o c is absent).
+//
+// It is different from -t in that each option is matched exactly; a leading
+// "no" at the beginning of one option does not negate the rest.
+static int match_opt(const char *fs_opt_in, const char *O_opt)
+{
+ if (!O_opt)
+ return 1;
-static const char must_be_root[] ALIGN1 = "you must be root";
+ while (*O_opt) {
+ const char *fs_opt = fs_opt_in;
+ int O_len;
+ int match;
+
+ // If option begins with "no" then treat as an inverted match:
+ // matching is a failure
+ match = 0;
+ if (O_opt[0] == 'n' && O_opt[1] == 'o') {
+ match = 1;
+ O_opt += 2;
+ }
+ // Isolate the current O option
+ O_len = strchrnul(O_opt, ',') - O_opt;
+ // Check for a match against existing options
+ while (1) {
+ if (strncmp(fs_opt, O_opt, O_len) == 0
+ && (fs_opt[O_len] == '\0' || fs_opt[O_len] == ',')
+ ) {
+ if (match)
+ return 0; // "no" prefix, but option found
+ match = 1; // current O option found, go check next one
+ break;
+ }
+ fs_opt = strchr(fs_opt, ',');
+ if (!fs_opt)
+ break;
+ fs_opt++;
+ }
+ if (match == 0)
+ return 0; // match wanted but not found
+ if (O_opt[O_len] == '\0') // end?
+ break;
+ // Step to the next O option
+ O_opt += O_len + 1;
+ }
+ // If we get here then everything matched
+ return 1;
+}
+// Parse options, if necessary parse fstab/mtab, and call singlemount for
+// each directory to be mounted.
int mount_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
-int mount_main(int argc, char **argv)
+int mount_main(int argc UNUSED_PARAM, char **argv)
{
- char *cmdopts = xstrdup("");
+ char *cmdopts = xzalloc(1);
char *fstype = NULL;
- char *storage_path = NULL;
- char *opt_o;
+ char *O_optmatch = NULL;
+ char *storage_path;
+ llist_t *lst_o = NULL;
const char *fstabname;
FILE *fstab;
- int i, j, rc = 0;
+ int i, j;
+ int rc = EXIT_SUCCESS;
+ unsigned long cmdopt_flags;
unsigned opt;
struct mntent mtpair[2], *mtcur = mtpair;
- SKIP_DESKTOP(const int nonroot = 0;)
+ IF_NOT_DESKTOP(const int nonroot = 0;)
+
+ IF_DESKTOP(int nonroot = ) sanitize_env_if_suid();
- USE_DESKTOP( int nonroot = ) sanitize_env_if_suid();
+ INIT_G();
// Parse long options, like --bind and --move. Note that -o option
// and --option are synonymous. Yes, this means --remount,rw works.
-
- for (i = j = 0; i < argc; i++) {
- if (argv[i][0] == '-' && argv[i][1] == '-') {
- append_mount_options(&cmdopts, argv[i]+2);
- } else argv[j++] = argv[i];
+ for (i = j = 1; argv[i]; i++) {
+ if (argv[i][0] == '-' && argv[i][1] == '-')
+ append_mount_options(&cmdopts, argv[i] + 2);
+ else
+ argv[j++] = argv[i];
}
argv[j] = NULL;
- argc = j;
// Parse remaining options
-
-#if ENABLE_FEATURE_MOUNT_VERBOSE
- opt_complementary = "vv"; // -v is a counter
-#endif
- opt = getopt32(argv, OPTION_STR, &opt_o, &fstype
- USE_FEATURE_MOUNT_VERBOSE(, &verbose));
- if (opt & OPT_o) append_mount_options(&cmdopts, opt_o); // -o
+ // Max 2 params; -o is a list, -v is a counter
+ opt_complementary = "?2o::" IF_FEATURE_MOUNT_VERBOSE("vv");
+ opt = getopt32(argv, OPTION_STR, &lst_o, &fstype, &O_optmatch
+ IF_FEATURE_MOUNT_VERBOSE(, &verbose));
+ while (lst_o) append_mount_options(&cmdopts, llist_pop(&lst_o)); // -o
if (opt & OPT_r) append_mount_options(&cmdopts, "ro"); // -r
if (opt & OPT_w) append_mount_options(&cmdopts, "rw"); // -w
argv += optind;
- argc -= optind;
-
- // Three or more non-option arguments? Die with a usage message.
-
- if (argc > 2) bb_show_usage();
// If we have no arguments, show currently mounted filesystems
-
- if (!argc) {
+ if (!argv[0]) {
if (!(opt & OPT_a)) {
FILE *mountTable = setmntent(bb_path_mtab_file, "r");
- if (!mountTable) bb_error_msg_and_die("no %s", bb_path_mtab_file);
+ if (!mountTable)
+ bb_error_msg_and_die("no %s", bb_path_mtab_file);
while (getmntent_r(mountTable, &mtpair[0], getmntent_buf,
GETMNTENT_BUFSIZE))
{
// Don't show rootfs. FIXME: why??
// util-linux 2.12a happily shows rootfs...
- //if (!strcmp(mtpair->mnt_fsname, "rootfs")) continue;
+ //if (strcmp(mtpair->mnt_fsname, "rootfs") == 0) continue;
- if (!fstype || !strcmp(mtpair->mnt_type, fstype))
+ if (!fstype || strcmp(mtpair->mnt_type, fstype) == 0)
printf("%s on %s type %s (%s)\n", mtpair->mnt_fsname,
mtpair->mnt_dir, mtpair->mnt_type,
mtpair->mnt_opts);
}
- if (ENABLE_FEATURE_CLEAN_UP) endmntent(mountTable);
+ if (ENABLE_FEATURE_CLEAN_UP)
+ endmntent(mountTable);
return EXIT_SUCCESS;
}
- } else storage_path = bb_simplify_path(argv[0]);
-
- // When we have two arguments, the second is the directory and we can
- // skip looking at fstab entirely. We can always abspath() the directory
- // argument when we get it.
-
- if (argc == 2) {
- if (nonroot)
- bb_error_msg_and_die(must_be_root);
- mtpair->mnt_fsname = argv[0];
- mtpair->mnt_dir = argv[1];
- mtpair->mnt_type = fstype;
- mtpair->mnt_opts = cmdopts;
- if (ENABLE_FEATURE_MOUNT_LABEL) {
+ storage_path = NULL;
+ } else {
+ // When we have two arguments, the second is the directory and we can
+ // skip looking at fstab entirely. We can always abspath() the directory
+ // argument when we get it.
+ if (argv[1]) {
+ if (nonroot)
+ bb_error_msg_and_die(bb_msg_you_must_be_root);
+ mtpair->mnt_fsname = argv[0];
+ mtpair->mnt_dir = argv[1];
+ mtpair->mnt_type = fstype;
+ mtpair->mnt_opts = cmdopts;
resolve_mount_spec(&mtpair->mnt_fsname);
+ rc = singlemount(mtpair, /*ignore_busy:*/ 0);
+ return rc;
}
- rc = singlemount(mtpair, 0);
- goto clean_up;
+ storage_path = bb_simplify_path(argv[0]); // malloced
}
- i = parse_mount_options(cmdopts, 0); // FIXME: should be "long", not "int"
- if (nonroot && (i & ~MS_SILENT)) // Non-root users cannot specify flags
- bb_error_msg_and_die(must_be_root);
+ // Past this point, we are handling either "mount -a [opts]"
+ // or "mount [opts] single_param"
- // If we have a shared subtree flag, don't worry about fstab or mtab.
+ cmdopt_flags = parse_mount_options(cmdopts, NULL);
+ if (nonroot && (cmdopt_flags & ~MS_SILENT)) // Non-root users cannot specify flags
+ bb_error_msg_and_die(bb_msg_you_must_be_root);
+ // If we have a shared subtree flag, don't worry about fstab or mtab.
if (ENABLE_FEATURE_MOUNT_FLAGS
- && (i & (MS_SHARED | MS_PRIVATE | MS_SLAVE | MS_UNBINDABLE))
+ && (cmdopt_flags & (MS_SHARED | MS_PRIVATE | MS_SLAVE | MS_UNBINDABLE))
) {
- rc = verbose_mount("", argv[0], "", i, "");
- if (rc) bb_simple_perror_msg_and_die(argv[0]);
- goto clean_up;
+ // verbose_mount(source, target, type, flags, data)
+ rc = verbose_mount("", argv[0], "", cmdopt_flags, "");
+ if (rc)
+ bb_simple_perror_msg_and_die(argv[0]);
+ return rc;
}
// Open either fstab or mtab
-
fstabname = "/etc/fstab";
- if (i & MS_REMOUNT) {
+ if (cmdopt_flags & MS_REMOUNT) {
+ // WARNING. I am not sure this matches util-linux's
+ // behavior. It's possible util-linux does not
+ // take -o opts from mtab (takes only mount source).
fstabname = bb_path_mtab_file;
}
fstab = setmntent(fstabname, "r");
if (!fstab)
- bb_perror_msg_and_die("cannot read %s", fstabname);
-
- // Loop through entries until we find what we're looking for.
+ bb_perror_msg_and_die("can't read '%s'", fstabname);
+ // Loop through entries until we find what we're looking for
memset(mtpair, 0, sizeof(mtpair));
for (;;) {
- struct mntent *mtnext = (mtcur==mtpair ? mtpair+1 : mtpair);
+ struct mntent *mtother = (mtcur==mtpair ? mtpair+1 : mtpair);
// Get next fstab entry
-
if (!getmntent_r(fstab, mtcur, getmntent_buf
+ (mtcur==mtpair ? GETMNTENT_BUFSIZE/2 : 0),
- GETMNTENT_BUFSIZE/2))
- {
- // Were we looking for something specific?
-
- if (argc) {
-
- // If we didn't find anything, complain.
-
- if (!mtnext->mnt_fsname)
- bb_error_msg_and_die("can't find %s in %s",
- argv[0], fstabname);
-
- mtcur = mtnext;
- if (nonroot) {
- // fstab must have "users" or "user"
- if (!(parse_mount_options(mtcur->mnt_opts, 0) & MOUNT_USERS))
- bb_error_msg_and_die(must_be_root);
- }
-
- // Mount the last thing we found.
-
- mtcur->mnt_opts = xstrdup(mtcur->mnt_opts);
- append_mount_options(&(mtcur->mnt_opts), cmdopts);
- if (ENABLE_FEATURE_MOUNT_LABEL) {
- resolve_mount_spec(&mtpair->mnt_fsname);
- }
- rc = singlemount(mtcur, 0);
- free(mtcur->mnt_opts);
- }
- goto clean_up;
+ GETMNTENT_BUFSIZE/2)
+ ) { // End of fstab/mtab is reached
+ mtcur = mtother; // the thing we found last time
+ break;
}
- /* If we're trying to mount something specific and this isn't it,
- * skip it. Note we must match both the exact text in fstab (ala
- * "proc") or a full path from root */
-
- if (argc) {
+ // If we're trying to mount something specific and this isn't it,
+ // skip it. Note we must match the exact text in fstab (ala
+ // "proc") or a full path from root
+ if (argv[0]) {
// Is this what we're looking for?
+ if (strcmp(argv[0], mtcur->mnt_fsname) != 0
+ && strcmp(storage_path, mtcur->mnt_fsname) != 0
+ && strcmp(argv[0], mtcur->mnt_dir) != 0
+ && strcmp(storage_path, mtcur->mnt_dir) != 0
+ ) {
+ continue; // no
+ }
- if (strcmp(argv[0], mtcur->mnt_fsname) &&
- strcmp(storage_path, mtcur->mnt_fsname) &&
- strcmp(argv[0], mtcur->mnt_dir) &&
- strcmp(storage_path, mtcur->mnt_dir)) continue;
-
- // Remember this entry. Something later may have overmounted
- // it, and we want the _last_ match.
-
- mtcur = mtnext;
-
- // If we're mounting all.
+ // Remember this entry. Something later may have
+ // overmounted it, and we want the _last_ match.
+ mtcur = mtother;
+ // If we're mounting all
} else {
- // Do we need to match a filesystem type?
- if (fstype && match_fstype(mtcur, fstype))
- continue;
-
- // Skip noauto and swap anyway.
+ struct mntent *mp;
+ // No, mount -a won't mount anything,
+ // even user mounts, for mere humans
+ if (nonroot)
+ bb_error_msg_and_die(bb_msg_you_must_be_root);
- if (parse_mount_options(mtcur->mnt_opts, 0) & (MOUNT_NOAUTO | MOUNT_SWAP))
+ // Does type match? (NULL matches always)
+ if (!match_fstype(mtcur, fstype))
continue;
- // No, mount -a won't mount anything,
- // even user mounts, for mere humans.
+ // Skip noauto and swap anyway
+ if ((parse_mount_options(mtcur->mnt_opts, NULL) & (MOUNT_NOAUTO | MOUNT_SWAP))
+ // swap is bogus "fstype", parse_mount_options can't check fstypes
+ || strcasecmp(mtcur->mnt_type, "swap") == 0
+ ) {
+ continue;
+ }
- if (nonroot)
- bb_error_msg_and_die(must_be_root);
+ // Does (at least one) option match?
+ // (NULL matches always)
+ if (!match_opt(mtcur->mnt_opts, O_optmatch))
+ continue;
- // Mount this thing.
- if (ENABLE_FEATURE_MOUNT_LABEL)
- resolve_mount_spec(&mtpair->mnt_fsname);
+ resolve_mount_spec(&mtcur->mnt_fsname);
// NFS mounts want this to be xrealloc-able
mtcur->mnt_opts = xstrdup(mtcur->mnt_opts);
- if (singlemount(mtcur, 1)) {
- /* Count number of failed mounts */
- rc++;
+
+ // If nothing is mounted on this directory...
+ // (otherwise repeated "mount -a" mounts everything again)
+ mp = find_mount_point(mtcur->mnt_dir, /*subdir_too:*/ 0);
+ // We do not check fsname match of found mount point -
+ // "/" may have fsname of "/dev/root" while fstab
+ // says "/dev/something_else".
+ if (mp) {
+ if (verbose) {
+ bb_error_msg("according to %s, "
+ "%s is already mounted on %s",
+ bb_path_mtab_file,
+ mp->mnt_fsname, mp->mnt_dir);
+ }
+ } else {
+ // ...mount this thing
+ if (singlemount(mtcur, /*ignore_busy:*/ 1)) {
+ // Count number of failed mounts
+ rc++;
+ }
}
free(mtcur->mnt_opts);
}
}
- if (ENABLE_FEATURE_CLEAN_UP) endmntent(fstab);
- clean_up:
+ // End of fstab/mtab is reached.
+ // Were we looking for something specific?
+ if (argv[0]) { // yes
+ unsigned long l;
+
+ // If we didn't find anything, complain
+ if (!mtcur->mnt_fsname)
+ bb_error_msg_and_die("can't find %s in %s",
+ argv[0], fstabname);
+
+ // What happens when we try to "mount swap_partition"?
+ // (fstab containts "swap_partition swap swap defaults 0 0")
+ // util-linux-ng 2.13.1 does this:
+ // stat("/sbin/mount.swap", 0x7fff62a3a350) = -1 ENOENT (No such file or directory)
+ // mount("swap_partition", "swap", "swap", MS_MGC_VAL, NULL) = -1 ENOENT (No such file or directory)
+ // lstat("swap", 0x7fff62a3a640) = -1 ENOENT (No such file or directory)
+ // write(2, "mount: mount point swap does not exist\n", 39) = 39
+ // exit_group(32) = ?
+#if 0
+ // In case we want to simply skip swap partitions:
+ l = parse_mount_options(mtcur->mnt_opts, NULL);
+ if ((l & MOUNT_SWAP)
+ // swap is bogus "fstype", parse_mount_options can't check fstypes
+ || strcasecmp(mtcur->mnt_type, "swap") == 0
+ ) {
+ goto ret;
+ }
+#endif
+ if (nonroot) {
+ // fstab must have "users" or "user"
+ l = parse_mount_options(mtcur->mnt_opts, NULL);
+ if (!(l & MOUNT_USERS))
+ bb_error_msg_and_die(bb_msg_you_must_be_root);
+ }
+
+ //util-linux-2.12 does not do this check.
+ //// If nothing is mounted on this directory...
+ //// (otherwise repeated "mount FOO" mounts FOO again)
+ //mp = find_mount_point(mtcur->mnt_dir, /*subdir_too:*/ 0);
+ //if (mp) {
+ // bb_error_msg("according to %s, "
+ // "%s is already mounted on %s",
+ // bb_path_mtab_file,
+ // mp->mnt_fsname, mp->mnt_dir);
+ //} else {
+ // ...mount the last thing we found
+ mtcur->mnt_opts = xstrdup(mtcur->mnt_opts);
+ append_mount_options(&(mtcur->mnt_opts), cmdopts);
+ resolve_mount_spec(&mtpair->mnt_fsname);
+ rc = singlemount(mtcur, /*ignore_busy:*/ 0);
+ if (ENABLE_FEATURE_CLEAN_UP)
+ free(mtcur->mnt_opts);
+ //}
+ }
+ //ret:
+ if (ENABLE_FEATURE_CLEAN_UP)
+ endmntent(fstab);
if (ENABLE_FEATURE_CLEAN_UP) {
free(storage_path);
free(cmdopts);
}
+//TODO: exitcode should be ORed mask of (from "man mount"):
+// 0 success
+// 1 incorrect invocation or permissions
+// 2 system error (out of memory, cannot fork, no more loop devices)
+// 4 internal mount bug or missing nfs support in mount
+// 8 user interrupt
+//16 problems writing or locking /etc/mtab
+//32 mount failure
+//64 some mount succeeded
return rc;
}