use warnings;
use POSIX;
-use File::Spec;
+use File::Basename;
use File::Copy;
use OpenSSL::Test qw/:DEFAULT with bldtop_file srctop_file cmdstr/;
use OpenSSL::Test::Utils;
# new format in ssl_test.c and add recipes to 80-test_ssl_new.t instead.
plan tests =>
1 # For testss
- + 14 # For the first testssl
+ +6 # For the first testssl
;
subtest 'test_ss' => sub {
subtest 'standard SSL tests' => sub {
######################################################################
- plan tests => 21;
+ plan tests => 21;
SKIP: {
skip "SSLv3 is not supported by this OpenSSL build", 4
};
- subtest 'Next Protocol Negotiation Tests' => sub {
- ######################################################################
-
- plan tests => 7;
-
- SKIP: {
- skip "TLSv1.0 is not supported by this OpenSSL build", 7
- if $no_tls1;
- skip "Next Protocol Negotiation is not supported by this OpenSSL build", 7
- if disabled("nextprotoneg");
-
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server_reject"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server_reject"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2", "-reuse"])));
- }
- };
-
subtest 'Custom Extension tests' => sub {
######################################################################
}
};
- subtest 'SNI tests' => sub {
-
- plan tests => 7;
-
- SKIP: {
- skip "TLSv1.x is not supported by this OpenSSL build", 7
- if $no_tls1 && $no_tls1_1 && $no_tls1_2;
-
- ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo"])));
- ok(run(test([@ssltest, "-bio_pair", "-sn_server1", "foo"])));
- ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo", "-sn_server1", "foo", "-sn_expect1"])));
- ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo", "-sn_server1", "bar", "-sn_expect1"])));
- ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo", "-sn_server1", "foo", "-sn_server2", "bar", "-sn_expect1"])));
- ok(run(test([@ssltest, "-bio_pair", "-sn_client", "bar", "-sn_server1", "foo", "-sn_server2", "bar", "-sn_expect2"])));
- # Negative test - make sure it doesn't crash, and doesn't switch contexts
- ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foobar", "-sn_server1", "foo", "-sn_server2", "bar", "-sn_expect1"])));
- }
- };
-
- subtest 'ALPN tests' => sub {
- ######################################################################
-
- plan tests => 13;
-
- SKIP: {
- skip "TLSv1.0 is not supported by this OpenSSL build", 13
- if $no_tls1;
-
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_server", "foo"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "foo", "-alpn_expected", "foo"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "foo", "-alpn_expected", "foo"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo", "-alpn_expected", "foo"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo,bar", "-alpn_expected", "foo"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "bar,foo", "-alpn_expected", "bar"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "bar,foo", "-alpn_expected", "bar"])));
-
- is(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "bar"])), 0,
- "Testing ALPN with protocol mismatch, expecting failure");
- is(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "baz", "-alpn_server", "bar,foo"])), 0,
- "Testing ALPN with protocol mismatch, expecting failure");
-
- # ALPN + SNI
- ok(run(test([@ssltest, "-bio_pair",
- "-alpn_client", "foo,bar", "-sn_client", "alice",
- "-alpn_server1", "foo,123", "-sn_server1", "alice",
- "-alpn_server2", "bar,456", "-sn_server2", "bob",
- "-alpn_expected", "foo"])));
- ok(run(test([@ssltest, "-bio_pair",
- "-alpn_client", "foo,bar", "-sn_client", "bob",
- "-alpn_server1", "foo,123", "-sn_server1", "alice",
- "-alpn_server2", "bar,456", "-sn_server2", "bob",
- "-alpn_expected", "bar"])));
- ok(run(test([@ssltest, "-bio_pair",
- "-alpn_client", "foo,bar", "-sn_client", "bob",
- "-alpn_server2", "bar,456", "-sn_server2", "bob",
- "-alpn_expected", "bar"])));
- }
- };
-
subtest 'SRP tests' => sub {
plan tests => 4;
SKIP: {
skip "skipping SRP tests", 4
- if $no_srp;
+ if $no_srp || alldisabled(grep !/^ssl3/, available_protocols("tls"));
ok(run(test([@ssltest, "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
'test tls1 with SRP');
'test tls1 with SRP auth via BIO pair');
}
};
-
- subtest 'Multi-buffer tests' => sub {
- ######################################################################
-
- plan tests => 2;
-
- SKIP: {
- skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 2
- if $no_anytls;
-
- skip "skipping multi-buffer tests", 2
- if (POSIX::uname())[4] ne "x86_64";
-
- ok(run(test([@ssltest, "-cipher", "AES128-SHA", "-bytes", "8m"])));
-
- # We happen to know that AES128-SHA256 is TLSv1.2 only... for now.
- skip "TLSv1.2 is not supported by this OpenSSL configuration", 1
- if $no_tls1_2;
-
- ok(run(test([@ssltest, "-cipher", "AES128-SHA256", "-bytes", "8m"])));
- }
- };
-
- subtest 'DTLS Version min/max tests' => sub {
- my @protos;
- push(@protos, "dtls1") unless ($no_dtls1 || $no_dtls);
- push(@protos, "dtls1.2") unless ($no_dtls1_2 || $no_dtls);
- my @minprotos = (undef, @protos);
- my @maxprotos = (@protos, undef);
- my @shdprotos = (@protos, $protos[$#protos]);
- my $n = ((@protos+2) * (@protos+3))/2 - 2;
- my $ntests = $n * $n;
- plan tests => $ntests;
- SKIP: {
- skip "DTLS disabled", 1 if $ntests == 1;
-
- my $should;
- for (my $smin = 0; $smin < @minprotos; ++$smin) {
- for (my $smax = $smin ? $smin - 1 : 0; $smax < @maxprotos; ++$smax) {
- for (my $cmin = 0; $cmin < @minprotos; ++$cmin) {
- for (my $cmax = $cmin ? $cmin - 1 : 0; $cmax < @maxprotos; ++$cmax) {
- if ($cmax < $smin-1) {
- $should = "fail-server";
- } elsif ($smax < $cmin-1) {
- $should = "fail-client";
- } elsif ($cmax > $smax) {
- $should = $shdprotos[$smax];
- } else {
- $should = $shdprotos[$cmax];
- }
-
- my @args = (@ssltest, "-dtls");
- push(@args, "-should_negotiate", $should);
- push(@args, "-server_min_proto", $minprotos[$smin])
- if (defined($minprotos[$smin]));
- push(@args, "-server_max_proto", $maxprotos[$smax])
- if (defined($maxprotos[$smax]));
- push(@args, "-client_min_proto", $minprotos[$cmin])
- if (defined($minprotos[$cmin]));
- push(@args, "-client_max_proto", $maxprotos[$cmax])
- if (defined($maxprotos[$cmax]));
- my $ok = run(test[@args]);
- if (! $ok) {
- print STDERR "\nsmin=$smin, smax=$smax, cmin=$cmin, cmax=$cmax\n";
- print STDERR "\nFailed: @args\n";
- }
- ok($ok);
- }}}}}
- };
-
- subtest 'TLS session reuse' => sub {
- plan tests => 12;
-
- SKIP: {
- skip "TLS1.1 or TLS1.2 disabled", 12 if $no_tls1_1 || $no_tls1_2;
- ok(run(test([@ssltest, "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
- ok(run(test([@ssltest, "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "tls1.2"])));
- ok(run(test([@ssltest, "-server_max_proto", "tls1.1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "tls1.1"])));
-
- ok(run(test([@ssltest, "-server_max_proto", "tls1.1", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
- ok(run(test([@ssltest, "-server_max_proto", "tls1.1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "tls1.1"])));
- ok(run(test([@ssltest, "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "tls1.2"])));
-
- ok(run(test([@ssltest, "-no_ticket", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
- ok(run(test([@ssltest, "-no_ticket", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "tls1.2"])));
- ok(run(test([@ssltest, "-no_ticket", "-server_max_proto", "tls1.1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "tls1.1"])));
-
- ok(run(test([@ssltest, "-no_ticket", "-server_max_proto", "tls1.1", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
- ok(run(test([@ssltest, "-no_ticket", "-server_max_proto", "tls1.1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "tls1.1"])));
- ok(run(test([@ssltest, "-no_ticket", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "tls1.2"])));
- }
- };
-
- subtest 'DTLS session reuse' => sub {
- plan tests => 12;
- SKIP: {
- skip "DTLS disabled", 12 if $no_dtls;
-
- ok(run(test([@ssltest, "-dtls", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
- ok(run(test([@ssltest, "-dtls", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "dtls1.2"])));
- ok(run(test([@ssltest, "-dtls", "-server_max_proto", "dtls1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "dtls1"])));
-
- ok(run(test([@ssltest, "-dtls", "-server_max_proto", "dtls1", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
- ok(run(test([@ssltest, "-dtls", "-server_max_proto", "dtls1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "dtls1"])));
- ok(run(test([@ssltest, "-dtls", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "dtls1.2"])));
-
- ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
- ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "dtls1.2"])));
- ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_max_proto", "dtls1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "dtls1"])));
-
- ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_max_proto", "dtls1", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
- ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_max_proto", "dtls1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "dtls1"])));
- ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "dtls1.2"])));
- }
- };
-
- subtest 'Certificate Transparency tests' => sub {
- ######################################################################
-
- plan tests => 3;
-
- SKIP: {
- skip "Certificate Transparency is not supported by this OpenSSL build", 3
- if $no_ct;
- skip "TLSv1.0 is not supported by this OpenSSL build", 3
- if $no_tls1;
-
- $ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
- my @ca = qw(-CAfile certCA.ss);
- ok(run(test([@ssltest, @ca, "-bio_pair", "-tls1", "-noct"])));
- # No SCTs provided, so this should fail.
- ok(run(test([@ssltest, @ca, "-bio_pair", "-tls1", "-ct",
- "-should_negotiate", "fail-client"])));
- # No SCTs provided, unverified chains still succeed.
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-ct"])));
- }
- };
}
+
+unlink $CAkey;
+unlink $CAcert;
+unlink $CAserial;
+unlink $CAreq;
+unlink $CAreq2;
+
+unlink $Ukey;
+unlink $Ureq;
+unlink $Ucert;
+unlink basename($Ucert, '.ss').'.srl';
+
+unlink $Dkey;
+unlink $Dreq;
+unlink $Dcert;
+
+unlink $Ekey;
+unlink $Ereq;
+unlink $Ecert;
+
+unlink $P1key;
+unlink $P1req;
+unlink $P1cert;
+unlink basename($P1cert, '.ss').'.srl';
+unlink $P1intermediate;
+unlink "intP1.ss";
+
+unlink $P2key;
+unlink $P2req;
+unlink $P2cert;
+unlink $P2intermediate;
+unlink "intP2.ss";
+
+unlink "ecp.ss";
+unlink "err.ss";
+
+unlink $server_sess;
+unlink $client_sess;
projects / oweals / openssl.git / blobdiff