use warnings;
use POSIX;
-use File::Spec;
+use File::Basename;
use File::Copy;
use OpenSSL::Test qw/:DEFAULT with bldtop_file srctop_file cmdstr/;
use OpenSSL::Test::Utils;
my @reqcmd = ("openssl", "req");
my @x509cmd = ("openssl", "x509", $digest);
my @verifycmd = ("openssl", "verify");
+my @gendsacmd = ("openssl", "gendsa");
my $dummycnf = srctop_file("apps", "openssl.cnf");
my $CAkey = "keyCA.ss";
# new format in ssl_test.c and add recipes to 80-test_ssl_new.t instead.
plan tests =>
1 # For testss
- + 1 # For ssltest_old -test_cipherlist
- + 14 # For the first testssl
- + 16 # For the first testsslproxy
- + 16 # For the second testsslproxy
+ + 12 # For the first testssl
;
subtest 'test_ss' => sub {
}
};
-my $check = ok(run(test(["ssltest_old","-test_cipherlist"])), "running ssltest_old");
-
- SKIP: {
- skip "ssltest_old ended with error, skipping the rest", 3
- if !$check;
-
- note('test_ssl -- key U');
- testssl("keyU.ss", $Ucert, $CAcert);
-
- note('test_ssl -- key P1');
- testsslproxy("keyP1.ss", "certP1.ss", "intP1.ss", "AB");
-
- note('test_ssl -- key P2');
- testsslproxy("keyP2.ss", "certP2.ss", "intP2.ss", "BC");
- }
+note('test_ssl -- key U');
+testssl("keyU.ss", $Ucert, $CAcert);
# -----------
# subtest functions
my @req_dsa = ("-newkey",
"dsa:".srctop_file("apps", "dsa1024.pem"));
+ my $dsaparams = srctop_file("apps", "dsa1024.pem");
my @req_new;
if ($no_rsa) {
@req_new = @req_dsa;
plan skip_all => "skipping DSA certificate creation"
if $no_dsa;
- plan tests => 4;
+ plan tests => 5;
SKIP: {
$ENV{CN2} = "DSA Certificate";
+ skip 'failure', 4 unless
+ ok(run(app([@gendsacmd, "-out", $Dkey,
+ $dsaparams],
+ stdout => "err.ss")),
+ "make a DSA key");
skip 'failure', 3 unless
- ok(run(app([@reqcmd, "-config", $Uconf,
- "-out", $Dreq, "-keyout", $Dkey,
- @req_dsa],
+ ok(run(app([@reqcmd, "-new", "-config", $Uconf,
+ "-out", $Dreq, "-key", $Dkey],
stdout => "err.ss")),
"make a DSA user cert request");
skip 'failure', 2 unless
}
sub testssl {
- my $key = shift || bldtop_file("apps","server.pem");
- my $cert = shift || bldtop_file("apps","server.pem");
- my $CAtmp = shift;
+ my ($key, $cert, $CAtmp) = @_;
my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", bldtop_dir("certs"));
- my @extra = @_;
my @ssltest = ("ssltest_old",
"-s_key", $key, "-s_cert", $cert,
subtest 'standard SSL tests' => sub {
######################################################################
- plan tests => 29;
-
- SKIP: {
- skip "SSLv3 is not supported by this OpenSSL build", 4
- if disabled("ssl3");
-
- ok(run(test([@ssltest, "-ssl3", @extra])),
- 'test sslv3');
- ok(run(test([@ssltest, "-ssl3", "-server_auth", @CA, @extra])),
- 'test sslv3 with server authentication');
- ok(run(test([@ssltest, "-ssl3", "-client_auth", @CA, @extra])),
- 'test sslv3 with client authentication');
- ok(run(test([@ssltest, "-ssl3", "-server_auth", "-client_auth", @CA, @extra])),
- 'test sslv3 with both server and client authentication');
- }
-
- SKIP: {
- skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 4
- if $no_anytls;
-
- ok(run(test([@ssltest, @extra])),
- 'test sslv2/sslv3');
- ok(run(test([@ssltest, "-server_auth", @CA, @extra])),
- 'test sslv2/sslv3 with server authentication');
- ok(run(test([@ssltest, "-client_auth", @CA, @extra])),
- 'test sslv2/sslv3 with client authentication');
- ok(run(test([@ssltest, "-server_auth", "-client_auth", @CA, @extra])),
- 'test sslv2/sslv3 with both server and client authentication');
- }
+ plan tests => 21;
SKIP: {
skip "SSLv3 is not supported by this OpenSSL build", 4
if disabled("ssl3");
- ok(run(test([@ssltest, "-bio_pair", "-ssl3", @extra])),
+ ok(run(test([@ssltest, "-bio_pair", "-ssl3"])),
'test sslv3 via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA, @extra])),
+ ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA])),
'test sslv3 with server authentication via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA, @extra])),
+ ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA])),
'test sslv3 with client authentication via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA, @extra])),
+ ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA])),
'test sslv3 with both server and client authentication via BIO pair');
}
skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 1
if $no_anytls;
- ok(run(test([@ssltest, "-bio_pair", @extra])),
+ ok(run(test([@ssltest, "-bio_pair"])),
'test sslv2/sslv3 via BIO pair');
}
skip "DTLSv1 is not supported by this OpenSSL build", 4
if disabled("dtls1");
- ok(run(test([@ssltest, "-dtls1", @extra])),
+ ok(run(test([@ssltest, "-dtls1"])),
'test dtlsv1');
- ok(run(test([@ssltest, "-dtls1", "-server_auth", @CA, @extra])),
+ ok(run(test([@ssltest, "-dtls1", "-server_auth", @CA])),
'test dtlsv1 with server authentication');
- ok(run(test([@ssltest, "-dtls1", "-client_auth", @CA, @extra])),
+ ok(run(test([@ssltest, "-dtls1", "-client_auth", @CA])),
'test dtlsv1 with client authentication');
- ok(run(test([@ssltest, "-dtls1", "-server_auth", "-client_auth", @CA, @extra])),
+ ok(run(test([@ssltest, "-dtls1", "-server_auth", "-client_auth", @CA])),
'test dtlsv1 with both server and client authentication');
}
skip "DTLSv1.2 is not supported by this OpenSSL build", 4
if disabled("dtls1_2");
- ok(run(test([@ssltest, "-dtls12", @extra])),
+ ok(run(test([@ssltest, "-dtls12"])),
'test dtlsv1.2');
- ok(run(test([@ssltest, "-dtls12", "-server_auth", @CA, @extra])),
+ ok(run(test([@ssltest, "-dtls12", "-server_auth", @CA])),
'test dtlsv1.2 with server authentication');
- ok(run(test([@ssltest, "-dtls12", "-client_auth", @CA, @extra])),
+ ok(run(test([@ssltest, "-dtls12", "-client_auth", @CA])),
'test dtlsv1.2 with client authentication');
- ok(run(test([@ssltest, "-dtls12", "-server_auth", "-client_auth", @CA, @extra])),
+ ok(run(test([@ssltest, "-dtls12", "-server_auth", "-client_auth", @CA])),
'test dtlsv1.2 with both server and client authentication');
}
SKIP: {
skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert;
- ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe", @extra])),
+ ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe"])),
'test sslv2/sslv3 w/o (EC)DHE via BIO pair');
}
- ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v", @extra])),
+ ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v"])),
'test sslv2/sslv3 with 1024bit DHE via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA, @extra])),
+ ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA])),
'test sslv2/sslv3 with server authentication');
- ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA, @extra])),
+ ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA])),
'test sslv2/sslv3 with client authentication via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA, @extra])),
+ ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA])),
'test sslv2/sslv3 with both client and server authentication via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA, @extra])),
+ ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA])),
'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify');
SKIP: {
skip "No IPv4 available on this machine", 1
unless !disabled("sock") && have_IPv4();
- ok(run(test([@ssltest, "-ipv4", @extra])),
+ ok(run(test([@ssltest, "-ipv4"])),
'test TLS via IPv4');
}
SKIP: {
skip "No IPv6 available on this machine", 1
unless !disabled("sock") && have_IPv6();
- ok(run(test([@ssltest, "-ipv6", @extra])),
+ ok(run(test([@ssltest, "-ipv6"])),
'test TLS via IPv6');
}
}
skip "skipping anonymous DH tests", 1
if ($no_dh);
- ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time", @extra])),
+ ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time"])),
'test tlsv1 with 1024bit anonymous DH, multiple handshakes');
}
skip "skipping RSA tests", 2
if $no_rsa;
- ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time", @extra])),
+ ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time"])),
'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes');
skip "skipping RSA+DHE tests", 1
if $no_dh;
- ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time", @extra])),
+ ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time"])),
'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes');
}
skip "skipping PSK tests", 2
if ($no_psk);
- ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123", @extra])),
+ ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123"])),
'test tls1 with PSK');
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123", @extra])),
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123"])),
'test tls1 with PSK via BIO pair');
}
}
}
};
- subtest 'SNI tests' => sub {
-
- plan tests => 7;
-
- SKIP: {
- skip "TLSv1.x is not supported by this OpenSSL build", 7
- if $no_tls1 && $no_tls1_1 && $no_tls1_2;
-
- ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo"])));
- ok(run(test([@ssltest, "-bio_pair", "-sn_server1", "foo"])));
- ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo", "-sn_server1", "foo", "-sn_expect1"])));
- ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo", "-sn_server1", "bar", "-sn_expect1"])));
- ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo", "-sn_server1", "foo", "-sn_server2", "bar", "-sn_expect1"])));
- ok(run(test([@ssltest, "-bio_pair", "-sn_client", "bar", "-sn_server1", "foo", "-sn_server2", "bar", "-sn_expect2"])));
- # Negative test - make sure it doesn't crash, and doesn't switch contexts
- ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foobar", "-sn_server1", "foo", "-sn_server2", "bar", "-sn_expect1"])));
- }
- };
-
subtest 'ALPN tests' => sub {
######################################################################
if $no_anytls;
skip "skipping multi-buffer tests", 2
- if @extra || (POSIX::uname())[4] ne "x86_64";
+ if (POSIX::uname())[4] ne "x86_64";
ok(run(test([@ssltest, "-cipher", "AES128-SHA", "-bytes", "8m"])));
}
};
- subtest 'DTLS Version min/max tests' => sub {
- my @protos;
- push(@protos, "dtls1") unless ($no_dtls1 || $no_dtls);
- push(@protos, "dtls1.2") unless ($no_dtls1_2 || $no_dtls);
- my @minprotos = (undef, @protos);
- my @maxprotos = (@protos, undef);
- my @shdprotos = (@protos, $protos[$#protos]);
- my $n = ((@protos+2) * (@protos+3))/2 - 2;
- my $ntests = $n * $n;
- plan tests => $ntests;
- SKIP: {
- skip "DTLS disabled", 1 if $ntests == 1;
-
- my $should;
- for (my $smin = 0; $smin < @minprotos; ++$smin) {
- for (my $smax = $smin ? $smin - 1 : 0; $smax < @maxprotos; ++$smax) {
- for (my $cmin = 0; $cmin < @minprotos; ++$cmin) {
- for (my $cmax = $cmin ? $cmin - 1 : 0; $cmax < @maxprotos; ++$cmax) {
- if ($cmax < $smin-1) {
- $should = "fail-server";
- } elsif ($smax < $cmin-1) {
- $should = "fail-client";
- } elsif ($cmax > $smax) {
- $should = $shdprotos[$smax];
- } else {
- $should = $shdprotos[$cmax];
- }
-
- my @args = (@ssltest, "-dtls");
- push(@args, "-should_negotiate", $should);
- push(@args, "-server_min_proto", $minprotos[$smin])
- if (defined($minprotos[$smin]));
- push(@args, "-server_max_proto", $maxprotos[$smax])
- if (defined($maxprotos[$smax]));
- push(@args, "-client_min_proto", $minprotos[$cmin])
- if (defined($minprotos[$cmin]));
- push(@args, "-client_max_proto", $maxprotos[$cmax])
- if (defined($maxprotos[$cmax]));
- my $ok = run(test[@args]);
- if (! $ok) {
- print STDERR "\nsmin=$smin, smax=$smax, cmin=$cmin, cmax=$cmax\n";
- print STDERR "\nFailed: @args\n";
- }
- ok($ok);
- }}}}}
- };
-
subtest 'TLS session reuse' => sub {
plan tests => 12;
subtest 'DTLS session reuse' => sub {
plan tests => 12;
SKIP: {
- skip "DTLS disabled", 12 if $no_dtls;
+ skip "DTLS1.0 or DTLS1.2 disabled", 12 if $no_dtls1 || $no_dtls1_2;
ok(run(test([@ssltest, "-dtls", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
ok(run(test([@ssltest, "-dtls", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "dtls1.2"])));
};
}
-sub testsslproxy {
- my $key = shift || srctop_file("apps","server.pem");
- my $cert = shift || srctop_file("apps","server.pem");
- my $CAtmp = shift;
- my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", bldtop_dir("certs"));
- my @extra = @_;
-
- my @ssltest = ("ssltest_old",
- "-s_key", $key, "-s_cert", $cert,
- "-c_key", $key, "-c_cert", $cert);
-
- # plan tests => 16;
-
- note('Testing a lot of proxy conditions.');
-
- # We happen to know that certP1.ss has policy letters "AB" and
- # certP2.ss has policy letters "BC". However, because certP2.ss
- # has certP1.ss as issuer, when it's used, both their policy
- # letters get combined into just "B".
- # The policy letter(s) then get filtered with the given auth letter
- # in the table below, and the result gets tested with the given
- # condition. For details, read ssltest_old.c
- #
- # certfilename => [ [ auth, cond, expected result ] ... ]
- my %expected = ( "certP1.ss" => [ [ [ 'A', 'A' ], 1 ],
- [ [ 'A', 'B' ], 0 ],
- [ [ 'A', 'C' ], 0 ],
- [ [ 'A', 'A|B&!C' ], 1 ],
- [ [ 'B', 'A' ], 0 ],
- [ [ 'B', 'B' ], 1 ],
- [ [ 'B', 'C' ], 0 ],
- [ [ 'B', 'A|B&!C' ], 1 ],
- [ [ 'C', 'A' ], 0 ],
- [ [ 'C', 'B' ], 0 ],
- [ [ 'C', 'C' ], 0 ],
- [ [ 'C', 'A|B&!C' ], 0 ],
- [ [ 'BC', 'A' ], 0 ],
- [ [ 'BC', 'B' ], 1 ],
- [ [ 'BC', 'C' ], 0 ],
- [ [ 'BC', 'A|B&!C' ], 1 ] ],
- "certP2.ss" => [ [ [ 'A', 'A' ], 0 ],
- [ [ 'A', 'B' ], 0 ],
- [ [ 'A', 'C' ], 0 ],
- [ [ 'A', 'A|B&!C' ], 0 ],
- [ [ 'B', 'A' ], 0 ],
- [ [ 'B', 'B' ], 1 ],
- [ [ 'B', 'C' ], 0 ],
- [ [ 'B', 'A|B&!C' ], 1 ],
- [ [ 'C', 'A' ], 0 ],
- [ [ 'C', 'B' ], 0 ],
- [ [ 'C', 'C' ], 0 ],
- [ [ 'C', 'A|B&!C' ], 0 ],
- [ [ 'BC', 'A' ], 0 ],
- [ [ 'BC', 'B' ], 1 ],
- [ [ 'BC', 'C' ], 0 ],
- [ [ 'BC', 'A|B&!C' ], 1 ] ] );
-
- SKIP: {
- skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", scalar(@{$expected{$cert}})
- if $no_anytls;
-
- foreach (@{$expected{$cert}}) {
- my $auth = $_->[0]->[0];
- my $cond = $_->[0]->[1];
- my $res = $_->[1];
- is(run(test([@ssltest, "-server_auth", @CA,
- "-proxy", "-proxy_auth", $auth,
- "-proxy_cond", $cond])), $res,
- "test tlsv1, server auth, proxy auth $auth and cond $cond (expect "
- .($res ? "success" : "failure").")");
- }
- }
-}
+unlink $CAkey;
+unlink $CAcert;
+unlink $CAserial;
+unlink $CAreq;
+unlink $CAreq2;
+
+unlink $Ukey;
+unlink $Ureq;
+unlink $Ucert;
+unlink basename($Ucert, '.ss').'.srl';
+
+unlink $Dkey;
+unlink $Dreq;
+unlink $Dcert;
+
+unlink $Ekey;
+unlink $Ereq;
+unlink $Ecert;
+
+unlink $P1key;
+unlink $P1req;
+unlink $P1cert;
+unlink basename($P1cert, '.ss').'.srl';
+unlink $P1intermediate;
+unlink "intP1.ss";
+
+unlink $P2key;
+unlink $P2req;
+unlink $P2cert;
+unlink $P2intermediate;
+unlink "intP2.ss";
+
+unlink "ecp.ss";
+unlink "err.ss";
+
+unlink $server_sess;
+unlink $client_sess;