#! /usr/bin/env perl
-# Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved.
+# Copyright 2015-2018 The OpenSSL Project Authors. All Rights Reserved.
#
-# Licensed under the OpenSSL license (the "License"). You may not use
+# Licensed under the Apache License 2.0 (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html
use File::Basename;
use File::Compare qw/compare_text/;
-use if $^O ne "VMS", 'File::Glob' => qw/glob/;
-
+use OpenSSL::Glob;
use OpenSSL::Test qw/:DEFAULT srctop_dir srctop_file/;
use OpenSSL::Test::Utils qw/disabled alldisabled available_protocols/;
setup("test_ssl_new");
$ENV{TEST_CERTS_DIR} = srctop_dir("test", "certs");
-$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
+$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.cnf");
-my @conf_srcs = glob(srctop_file("test", "ssl-tests", "*.conf.in"));
+my @conf_srcs = glob(srctop_file("test", "ssl-tests", "*.cnf.in"));
map { s/;.*// } @conf_srcs if $^O eq "VMS";
my @conf_files = map { basename($_, ".in") } @conf_srcs;
map { s/\^// } @conf_files if $^O eq "VMS";
# We hard-code the number of tests to double-check that the globbing above
# finds all files as expected.
-plan tests => 22; # = scalar @conf_srcs
+plan tests => 30; # = scalar @conf_srcs
# Some test results depend on the configuration of enabled protocols. We only
# verify generated sources in the default configuration.
my $is_default_tls = (disabled("ssl3") && !disabled("tls1") &&
!disabled("tls1_1") && !disabled("tls1_2") &&
- disabled("tls1_3"));
+ !disabled("tls1_3"));
my $is_default_dtls = (!disabled("dtls1") && !disabled("dtls1_2"));
my @all_pre_tls1_3 = ("ssl3", "tls1", "tls1_1", "tls1_2");
my $no_tls = alldisabled(available_protocols("tls"));
+my $no_tls_below1_3 = $no_tls || (disabled("tls1_2") && !disabled("tls1_3"));
my $no_pre_tls1_3 = alldisabled(@all_pre_tls1_3);
my $no_dtls = alldisabled(available_protocols("dtls"));
my $no_npn = disabled("nextprotoneg");
# Add your test here if the test conf.in generates test cases and/or
# expectations dynamically based on the OpenSSL compile-time config.
my %conf_dependent_tests = (
- "02-protocol-version.conf" => !$is_default_tls,
- "04-client_auth.conf" => !$is_default_tls,
- "05-sni.conf" => disabled("tls1_1"),
- "07-dtls-protocol-version.conf" => !$is_default_dtls,
- "10-resumption.conf" => !$is_default_tls,
- "11-dtls_resumption.conf" => !$is_default_dtls,
- "17-renegotiate.conf" => disabled("tls1_2"),
- "18-dtls-renegotiate.conf" => disabled("dtls1_2"),
- "19-mac-then-encrypt.conf" => !$is_default_tls,
- "20-cert-select.conf" => !$is_default_tls || $no_dh || $no_dsa,
- "22-compression.conf" => !$is_default_tls,
+ "02-protocol-version.cnf" => !$is_default_tls,
+ "04-client_auth.cnf" => !$is_default_tls || !$is_default_dtls
+ || !disabled("sctp"),
+ "05-sni.cnf" => disabled("tls1_1"),
+ "07-dtls-protocol-version.cnf" => !$is_default_dtls || !disabled("sctp"),
+ "10-resumption.cnf" => !$is_default_tls || $no_ec,
+ "11-dtls_resumption.cnf" => !$is_default_dtls || !disabled("sctp"),
+ "16-dtls-certstatus.cnf" => !$is_default_dtls || !disabled("sctp"),
+ "17-renegotiate.cnf" => disabled("tls1_2"),
+ "18-dtls-renegotiate.cnf" => disabled("dtls1_2") || !disabled("sctp"),
+ "19-mac-then-encrypt.cnf" => !$is_default_tls,
+ "20-cert-select.cnf" => !$is_default_tls || $no_dh || $no_dsa,
+ "22-compression.cnf" => !$is_default_tls,
+ "25-cipher.cnf" => disabled("poly1305") || disabled("chacha"),
+ "27-ticket-appdata.cnf" => !$is_default_tls,
+ "28-seclevel.cnf" => disabled("tls1_2") || $no_ec,
+ "30-extended-master-secret.cnf" => disabled("tls1_2"),
);
# Add your test here if it should be skipped for some compile-time
# configurations. Default is $no_tls but some tests have different skip
# conditions.
my %skip = (
- "07-dtls-protocol-version.conf" => $no_dtls,
- "08-npn.conf" => (disabled("tls1") && disabled("tls1_1")
+ "06-sni-ticket.cnf" => $no_tls_below1_3,
+ "07-dtls-protocol-version.cnf" => $no_dtls,
+ "08-npn.cnf" => (disabled("tls1") && disabled("tls1_1")
&& disabled("tls1_2")) || $no_npn,
- "10-resumption.conf" => disabled("tls1_1") || disabled("tls1_2"),
- "11-dtls_resumption.conf" => disabled("dtls1") || disabled("dtls1_2"),
- "12-ct.conf" => $no_tls || $no_ct || $no_ec,
+ "10-resumption.cnf" => disabled("tls1_1") || disabled("tls1_2"),
+ "11-dtls_resumption.cnf" => disabled("dtls1") || disabled("dtls1_2"),
+ "12-ct.cnf" => $no_tls || $no_ct || $no_ec,
# We could run some of these tests without TLS 1.2 if we had a per-test
# disable instruction but that's a bizarre configuration not worth
# special-casing for.
- # We should review this once we have TLS 1.3.
- "13-fragmentation.conf" => disabled("tls1_2"),
- "14-curves.conf" => disabled("tls1_2") || $no_ec || $no_ec2m,
- "15-certstatus.conf" => $no_tls || $no_ocsp,
- "16-dtls-certstatus.conf" => $no_dtls || $no_ocsp,
- "18-dtls-renegotiate.conf" => $no_dtls,
- "19-mac-then-encrypt.conf" => $no_pre_tls1_3,
- "20-cert-select.conf" => disabled("tls1_2") || $no_ec,
- "21-key-update.conf" => disabled("tls1_3"),
- "22-compression.conf" => disabled("zlib") || $no_tls,
+ # TODO(TLS 1.3): We should review this once we have TLS 1.3.
+ "13-fragmentation.cnf" => disabled("tls1_2"),
+ "14-curves.cnf" => disabled("tls1_2") || $no_ec || $no_ec2m,
+ "15-certstatus.cnf" => $no_tls || $no_ocsp,
+ "16-dtls-certstatus.cnf" => $no_dtls || $no_ocsp,
+ "17-renegotiate.cnf" => $no_tls_below1_3,
+ "18-dtls-renegotiate.cnf" => $no_dtls,
+ "19-mac-then-encrypt.cnf" => $no_pre_tls1_3,
+ "20-cert-select.cnf" => disabled("tls1_2") || $no_ec,
+ "21-key-update.cnf" => disabled("tls1_3"),
+ "22-compression.cnf" => disabled("zlib") || $no_tls,
+ "23-srp.cnf" => (disabled("tls1") && disabled ("tls1_1")
+ && disabled("tls1_2")) || disabled("srp"),
+ "24-padding.cnf" => disabled("tls1_3"),
+ "25-cipher.cnf" => disabled("ec") || disabled("tls1_2"),
+ "26-tls13_client_auth.cnf" => disabled("tls1_3"),
+ "29-dtls-sctp-label-bug.cnf" => disabled("sctp") || disabled("sock"),
);
foreach my $conf (@conf_files) {
my ($conf, $check_source, $skip) = @_;
my $conf_file = srctop_file("test", "ssl-tests", $conf);
- my $tmp_file = "${conf}.$$.tmp";
+ my $input_file = $conf_file . ".in";
+ my $output_file = $conf;
my $run_test = 1;
SKIP: {
# "Test" 1. Generate the source.
- my $input_file = $conf_file . ".in";
-
skip 'failure', 2 unless
ok(run(perltest(["generate_ssl_tests.pl", $input_file],
- interpreter_args => [ "-I", srctop_dir("test", "testlib")],
- stdout => $tmp_file)),
+ interpreter_args => [ "-I", srctop_dir("util", "perl")],
+ stdout => $output_file)),
"Getting output from generate_ssl_tests.pl.");
SKIP: {
- # Test 2. Compare against existing output in test/ssl_tests.conf.
+ # Test 2. Compare against existing output in test/ssl_tests.cnf.
skip "Skipping generated source test for $conf", 1
if !$check_source;
- $run_test = is(cmp_text($tmp_file, $conf_file), 0,
+ $run_test = is(cmp_text($output_file, $conf_file), 0,
"Comparing generated sources.");
}
skip "No tests available; skipping tests", 1 if $skip;
skip "Stale sources; skipping tests", 1 if !$run_test;
- ok(run(test(["ssl_test", $tmp_file])), "running ssl_test $conf");
+ ok(run(test(["ssl_test", $output_file])), "running ssl_test $conf");
}
-
- unlink glob $tmp_file;
}
sub cmp_text {