env__usb_dev_ports = (
{
+ "fixture_id": "micro_b",
"tgt_usb_ctlr": "0",
"host_usb_dev_node": "/dev/usbdev-p2371-2180",
# This parameter is optional /if/ you only have a single board
},
)
+# Optional entries (required only when "alt_id_test_file" and
+# "alt_id_dummy_file" are specified).
+test_file_name = "/dfu_test.bin"
+dummy_file_name = "/dfu_dummy.bin"
+# Above files are used to generate proper "alt_info" entry
+"alt_info": "/%s ext4 0 2;/%s ext4 0 2" % (test_file_name, dummy_file_name),
+
env__dfu_configs = (
# eMMC, partition 1
{
+ "fixture_id": "emmc",
"alt_info": "/dfu_test.bin ext4 0 1;/dfu_dummy.bin ext4 0 1",
"cmd_params": "mmc 0",
+ # This value is optional.
+ # If present, it specified the set of transfer sizes tested.
+ # If missing, a default list of sizes will be used, which covers
+ # various useful corner cases.
+ # Manually specifying test sizes is useful if you wish to test 4 DFU
+ # configurations, but don't want to test every single transfer size
+ # on each, to avoid bloating the overall time taken by testing.
+ "test_sizes": (63, 64, 65),
+ # This value is optional.
+ # The name of the environment variable that the the dfu command reads
+ # alt info from. If unspecified, this defaults to dfu_alt_info, which is
+ # valid for most systems. Some systems use a different variable name.
+ # One example is the Odroid XU3, which automatically generates
+ # $dfu_alt_info, each time the dfu command is run, by concatenating
+ # $dfu_alt_boot and $dfu_alt_system.
+ "alt_info_env_name": "dfu_alt_system",
+ # This value is optional.
+ # For boards which require the "test file" alt setting number other than
+ # default (0) it is possible to specify exact file name to be used as
+ # this parameter.
+ "alt_id_test_file": test_file_name,
+ # This value is optional.
+ # For boards which require the "dummy file" alt setting number other
+ # than default (1) it is possible to specify exact file name to be used
+ # as this parameter.
+ "alt_id_dummy_file": dummy_file_name,
},
)
+
b) udev rules to set permissions on devices nodes, so that sudo is not
required. For example:
(You may wish to change the group ID instead of setting the permissions wide
open. All that matters is that the user ID running the test can access the
device.)
+
+c) An optional udev rule to give you a persistent value to use in
+host_usb_dev_node. For example:
+
+IMPORT{builtin}="path_id"
+ENV{ID_PATH}=="?*", ENV{.ID_PORT}=="", SYMLINK+="bus/usb/by-path/$env{ID_PATH}"
+ENV{ID_PATH}=="?*", ENV{.ID_PORT}=="?*", SYMLINK+="bus/usb/by-path/$env{ID_PATH}-port$env{.ID_PORT}"
"""
# The set of file sizes to test. These values trigger various edge-cases such
# as one less than, equal to, and one greater than typical USB max packet
# sizes, and similar boundary conditions.
-test_sizes = (
+test_sizes_default = (
64 - 1,
64,
64 + 1,
Nothing.
"""
+ u_boot_utils.wait_until_file_open_fails(
+ env__usb_dev_port['host_usb_dev_node'], True)
fh = u_boot_utils.attempt_to_open_file(
env__usb_dev_port['host_usb_dev_node'])
if fh:
u_boot_console.log.action(
'Starting long-running U-Boot dfu shell command')
- cmd = 'setenv dfu_alt_info "%s"' % env__dfu_config['alt_info']
+ dfu_alt_info_env = env__dfu_config.get('alt_info_env_name', \
+ 'dfu_alt_info')
+
+ cmd = 'setenv "%s" "%s"' % (dfu_alt_info_env,
+ env__dfu_config['alt_info'])
u_boot_console.run_command(cmd)
cmd = 'dfu 0 ' + env__dfu_config['cmd_params']
Nothing.
"""
- cmd = ['dfu-util', '-a', str(alt_setting), up_dn_load_arg, fn]
+ cmd = ['dfu-util', '-a', alt_setting, up_dn_load_arg, fn]
if 'host_usb_port_path' in env__usb_dev_port:
cmd += ['-p', env__usb_dev_port['host_usb_port_path']]
u_boot_utils.run_and_log(u_boot_console, cmd)
u_boot_console.log.action('Writing test data to DFU primary ' +
'altsetting')
- dfu_write(0, test_f.abs_fn)
+ dfu_write(alt_setting_test_file, test_f.abs_fn)
u_boot_console.log.action('Writing dummy data to DFU secondary ' +
'altsetting to clear DFU buffers')
- dfu_write(1, dummy_f.abs_fn)
+ dfu_write(alt_setting_dummy_file, dummy_f.abs_fn)
u_boot_console.log.action('Reading DFU primary altsetting for ' +
'comparison')
- dfu_read(0, readback_fn)
+ dfu_read(alt_setting_test_file, readback_fn)
u_boot_console.log.action('Comparing written and read data')
written_hash = test_f.content_hash
if not first_usb_dev_port:
first_usb_dev_port = env__usb_dev_port
if env__usb_dev_port == first_usb_dev_port:
- sizes = test_sizes
+ sizes = env__dfu_config.get('test_sizes', test_sizes_default)
else:
sizes = []
dummy_f = u_boot_utils.PersistentRandomFile(u_boot_console,
'dfu_dummy.bin', 1024)
+ alt_setting_test_file = env__dfu_config.get('alt_id_test_file', '0')
+ alt_setting_dummy_file = env__dfu_config.get('alt_id_dummy_file', '1')
+
ignore_cleanup_errors = True
try:
start_dfu()
u_boot_console.log.action(
'Overwriting DFU primary altsetting with dummy data')
- dfu_write(0, dummy_f.abs_fn)
+ dfu_write(alt_setting_test_file, dummy_f.abs_fn)
for size in sizes:
- with u_boot_console.log.section("Data size %d" % size):
+ with u_boot_console.log.section('Data size %d' % size):
dfu_write_read_check(size)
# Make the status of each sub-test obvious. If the test didn't
# pass, an exception was thrown so this code isn't executed.