#
-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2012 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
include $(INCLUDE_DIR)/image.mk
export PATH=$(TARGET_PATH):/sbin
-BOOTOPTS=$(strip $(subst ",, $(CONFIG_X86_GRUB_BOOTOPTS)))
-ROOTPART=$(strip $(subst ",, $(CONFIG_X86_GRUB_ROOTPART)))
-#"))")) # fix vim's broken syntax highlighting
+GRUB2_MODULES = at_keyboard biosdisk boot chain configfile ext2 linux ls part_msdos reboot serial vga
+GRUB2_MODULES_ISO = at_keyboard biosdisk boot chain configfile iso9660 linux ls part_msdos reboot serial vga
+GRUB_TERMINALS =
+GRUB_SERIAL_CONFIG =
+GRUB_TERMINAL_CONFIG =
+GRUB_CONSOLE_CMDLINE =
-ifeq ($(CONFIG_X86_GRUB_IMAGES),y)
-ifneq ($(HOST_OS),Darwin)
- define Image/cmdline/squashfs
- block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=squashfs init=/etc/preinit
+ifneq ($(CONFIG_X86_GRUB_CONSOLE),)
+ GRUB_CONSOLE_CMDLINE += console=tty0
+ GRUB_TERMINALS += console
+endif
+
+ifneq ($(CONFIG_X86_GRUB_SERIAL),)
+ GRUB_CONSOLE_CMDLINE += console=$(call qstrip,$(CONFIG_X86_GRUB_SERIAL)),$(CONFIG_X86_GRUB_BAUDRATE)n8
+ GRUB_SERIAL_CONFIG := serial --unit=0 --speed=$(CONFIG_X86_GRUB_BAUDRATE) --word=8 --parity=no --stop=1
+ GRUB_TERMINALS += serial
+endif
+
+ifneq ($(GRUB_TERMINALS),)
+ GRUB_TERMINAL_CONFIG := terminal_input $(GRUB_TERMINALS); terminal_output $(GRUB_TERMINALS)
+endif
+
+ROOTPART:=$(call qstrip,$(CONFIG_TARGET_ROOTFS_PARTNAME))
+
+GRUB_TIMEOUT:=$(call qstrip,$(CONFIG_X86_GRUB_TIMEOUT))
+
+ifneq ($(CONFIG_X86_GRUB_IMAGES),)
+
+ BOOTOPTS:=$(call qstrip,$(CONFIG_X86_GRUB_BOOTOPTS))
+
+ define Image/cmdline/ext4
+ root=$(ROOTPART) rootfstype=ext4 rootwait
endef
define Image/cmdline/jffs2-64k
- block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=jffs2 init=/etc/preinit
+ block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=jffs2 rootwait
endef
define Image/cmdline/jffs2-128k
- block2mtd.block2mtd=$(ROOTPART),131072,rootfs root=/dev/mtdblock0 rootfstype=jffs2 init=/etc/preinit
+ block2mtd.block2mtd=$(ROOTPART),131072,rootfs root=/dev/mtdblock0 rootfstype=jffs2 rootwait
endef
- define Image/cmdline/ext2
- root=$(ROOTPART) rootfstype=ext2 init=/etc/preinit
+ define Image/cmdline/squashfs
+ block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=squashfs rootwait
endef
-
- define Image/Build/grub
+
+ define Image/Build/grub2
# left here because the image builder doesnt need these
- $(INSTALL_DIR) $(KDIR)/root.grub/boot/grub
- $(CP) \
- $(KDIR)/*stage* \
- $(KDIR)/root.grub/boot/grub/
+ $(INSTALL_DIR) $(KDIR)/root.grub/boot/grub $(KDIR)/grub2
$(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
+ grub-mkimage \
+ -o $(KDIR)/grub2/core.img \
+ -O i386-pc \
+ -c ./grub-early.cfg \
+ $(GRUB2_MODULES)
+ $(CP) $(STAGING_DIR_HOST)/lib/grub/i386-pc/*.img $(KDIR)/grub2/
+ echo '(hd0) $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img' > $(KDIR)/grub2/device.map
sed \
- -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1))) $(BOOTOPTS)#g' \
- -e 's#@BAUDRATE@#$(CONFIG_X86_GRUB_BAUDRATE)#g' \
- ./menu.lst > $(KDIR)/root.grub/boot/grub/menu.lst
- PADDING="$(CONFIG_X86_GRUB_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image.sh $(BIN_DIR)/openwrt-$(BOARD)-$(1).image $(CONFIG_X86_GRUB_KERNELPART) $(KDIR)/root.grub $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
+ -e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \
+ -e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
+ -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1)) $(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE))#g' \
+ -e 's#@TIMEOUT@#$(GRUB_TIMEOUT)#g' \
+ ./grub.cfg > $(KDIR)/root.grub/boot/grub/grub.cfg
+ PADDING="$(CONFIG_TARGET_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_generic.sh \
+ $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
+ $(CONFIG_TARGET_KERNEL_PARTSIZE) $(KDIR)/root.grub \
+ $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(KDIR)/root.$(1) \
+ 256
+ grub-bios-setup \
+ --device-map="$(KDIR)/grub2/device.map" \
+ -d "$(KDIR)/grub2" \
+ -r "hd0,msdos1" \
+ "$(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img"
$(call Image/Build/grub/$(1))
endef
+endif
+
+ROOTDELAY=10
+
+ifneq ($(CONFIG_OLPC_BOOTSCRIPT_IMAGES),)
+
+ define Image/cmdline/ext4
+ root=$(ROOTPART) rootfstype=ext4 rootwait
+ endef
- define Image/Prepare/grub
- # for the image builder
- $(CP) \
- $(STAGING_DIR_HOST)/usr/lib/grub/i386-pc/stage1 \
- $(STAGING_DIR_HOST)/usr/lib/grub/i386-pc/stage2 \
- $(STAGING_DIR_HOST)/usr/lib/grub/i386-pc/e2fs_stage1_5 \
- $(KDIR)/
+ define Image/cmdline/jffs2-64k
+ block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=jffs2 rootdelay=$(ROOTDELAY)
endef
-else
- define Image/Build/grub
- PADDING="$(CONFIG_X86_GRUB_IMAGES_PAD)" PATH="$(TARGET_PATH)" NOGRUB=1 ./gen_image.sh $(BIN_DIR)/openwrt-$(BOARD)-$(1).image $(CONFIG_X86_GRUB_KERNELPART) "" $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
+
+ define Image/cmdline/jffs2-128k
+ block2mtd.block2mtd=$(ROOTPART),131072,rootfs root=/dev/mtdblock0 rootfstype=jffs2 rootdelay=$(ROOTDELAY)
endef
+
+ define Image/cmdline/squashfs
+ block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=squashfs rootdelay=$(ROOTDELAY)
+ endef
+
+ define Image/Build/bootscript
+ # left here because the image builder doesnt need these
+ $(INSTALL_DIR) $(KDIR)/root.bootscript/boot
+ $(CP) $(KDIR)/bzImage $(KDIR)/root.bootscript/boot/vmlinuz
+ sed -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1))) $(BOOTOPTS)#g' \
+ ./olpc.fth > $(KDIR)/root.bootscript/boot/olpc.fth
+ PADDING="$(CONFIG_TARGET_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image_olpc.sh \
+ $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
+ $(CONFIG_TARGET_KERNEL_PARTSIZE) $(KDIR)/root.bootscript \
+ $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(KDIR)/root.$(1)
+ endef
+
endif
-endif
-ifeq ($(CONFIG_X86_VDI_IMAGES),y)
+define Image/Build/squashfs
+ $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+endef
+
+define Image/Build/iso
+ $(INSTALL_DIR) $(KDIR)/root.grub/boot/grub $(KDIR)/grub2
+ $(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
+ grub-mkimage \
+ -o $(KDIR)/grub2/eltorito.img \
+ -O i386-pc \
+ -c ./grub-early.cfg \
+ $(GRUB2_MODULES_ISO)
+ cat \
+ $(STAGING_DIR_HOST)/lib/grub/i386-pc/cdboot.img \
+ $(KDIR)/grub2/eltorito.img \
+ > $(KDIR)/root.grub/boot/grub/eltorito.img
+ sed \
+ -e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \
+ -e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
+ -e 's#@CMDLINE@#root=/dev/sr0 rootfstype=iso9660 rootwait $(strip $(call Image/cmdline/$(1)) $(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE))#g' \
+ -e 's#@TIMEOUT@#$(GRUB_TIMEOUT)#g' \
+ ./grub-iso.cfg > $(KDIR)/root.grub/boot/grub/grub.cfg
+ $(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
+ mkisofs -R -b boot/grub/eltorito.img -no-emul-boot -boot-info-table \
+ -o $(KDIR)/root.iso $(KDIR)/root.grub $(TARGET_DIR)
+endef
+
+ifneq ($(CONFIG_X86_VDI_IMAGES),)
define Image/Build/vdi
# left here because the image builder doesnt need these
- ifeq ($(1),ext2)
- rm $(BIN_DIR)/openwrt-$(BOARD)-ext2.vdi || true
- VBoxManage convertfromraw -format VDI $(BIN_DIR)/openwrt-$(BOARD)-ext2.image $(BIN_DIR)/openwrt-$(BOARD)-ext2.vdi
+ ifeq ($(1),ext4)
+ rm $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi || true
+ qemu-img convert -f raw -O vdi \
+ $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
+ $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi
+ # XXX: VBoxManage insists on setting perms to 0600
+ chmod 0644 $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vdi
endif
endef
endif
-ifeq ($(CONFIG_X86_VMDK_IMAGES),y)
+ifneq ($(CONFIG_X86_VMDK_IMAGES),)
define Image/Build/vmdk
# left here because the image builder doesnt need these
- ifeq ($(1),ext2)
- rm $(BIN_DIR)/openwrt-$(BOARD)-ext2.vmdk || true
- qemu-img convert -f raw $(BIN_DIR)/openwrt-$(BOARD)-ext2.image \
- -O vmdk $(BIN_DIR)/openwrt-$(BOARD)-ext2.vmdk
+ ifeq ($(1),ext4)
+ rm $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vmdk || true
+ qemu-img convert -f raw -O vmdk \
+ $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img \
+ $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).vmdk
endif
endef
endif
-define Image/Prepare
- $(CP) $(LINUX_DIR)/arch/x86/boot/bzImage $(KDIR)/bzImage
- $(call Image/Prepare/grub)
-endef
-
-define Image/Build/squashfs
- $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+define Image/Build/gzip
+ gzip -f9 $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).img
+ gzip -f9 $(BIN_DIR)/$(IMG_PREFIX)-rootfs-$(1).img
endef
-define Image/Build/iso
- $(CP) \
- $(STAGING_DIR_HOST)/usr/lib/grub/i386-pc/stage2_eltorito \
- $(KDIR)/root.grub/boot/grub/stage2_eltorito
- sed -i \
- -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1))) $(BOOTOPTS)#g' \
- -e 's#@BAUDRATE@#$(CONFIG_X86_GRUB_BAUDRATE)#g' \
- -e 's#(hd0,0)#(cd)#g' \
- $(KDIR)/root.grub/boot/grub/menu.lst
- $(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz
- mkisofs -R -b boot/grub/stage2_eltorito -no-emul-boot -boot-load-size 4 -boot-info-table \
- -o $(KDIR)/root.iso $(KDIR)/root.grub
-endef
+ifneq ($(CONFIG_TARGET_IMAGES_GZIP),)
+ define Image/Build/gzip/ext4
+ $(call Image/Build/gzip,ext4)
+ endef
+ ifneq ($(CONFIG_TARGET_IMAGES_PAD),)
+ define Image/Build/gzip/squashfs
+ $(call Image/Build/gzip,squashfs)
+ endef
+ define Image/Build/gzip/jffs2-64k
+ $(call Image/Build/gzip,jffs2-64k)
+ endef
+ define Image/Build/gzip/jffs2-128k
+ $(call Image/Build/gzip,jffs2-128k)
+ endef
+ endif
+endif
define Image/BuildKernel
- $(CP) $(KDIR)/bzImage $(BIN_DIR)/openwrt-$(BOARD)-vmlinuz
+ $(CP) $(KDIR)/bzImage $(BIN_DIR)/$(IMG_PREFIX)-vmlinuz
+ ifneq ($(CONFIG_X86_ETHERBOOT_IMAGES),)
+ rm -f $(BIN_DIR)/$(IMG_PREFIX)-etherboot
+ $(STAGING_DIR_HOST)/bin/mkelfImage \
+ --append=$(CONFIG_X86_ETHERBOOT_BOOTOPTS) \
+ $(KDIR)/bzImage \
+ $(BIN_DIR)/$(IMG_PREFIX)-etherboot
+ endif
+endef
+
+define Image/Build/Profile/ar525w
+ cp $(KDIR)/bzImage $(KDIR)/bzImage.tmp
+ $(SCRIPT_DIR)/pad_image $(1) $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) 32
+ $(STAGING_DIR_HOST)/bin/airlink -b 1 $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) \
+ $(BIN_DIR)/$(IMG_PREFIX)-$(1)-ar525w.img
+ $(STAGING_DIR_HOST)/bin/airlink -e -b 1 $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) \
+ $(BIN_DIR)/$(IMG_PREFIX)-$(1)-ar525w-web.img
+endef
+
+define Image/Build/Profile/sitecom
+ cp $(KDIR)/bzImage $(KDIR)/bzImage.tmp
+ #32k config data + 20 bytes header + 2 bytes checksum after kernel image
+ $(SCRIPT_DIR)/pad_image $(1) $(KDIR)/bzImage.tmp $(KDIR)/root.$(1) 32790
+ $(TOPDIR)/target/linux/rdc/image/mkimg_sitecom.pl $(KDIR)/bzImage.tmp > $(KDIR)/tmp.img
+ cat $(KDIR)/root.$(1) >> $(KDIR)/tmp.img
+ cp $(KDIR)/tmp.img $(BIN_DIR)/$(IMG_PREFIX)-$(1)-sitecom.img
+ rm $(KDIR)/tmp.img $(KDIR)/bzImage.tmp
+endef
+
+define Image/Build/Profile/bifferboard
+ $(TOPDIR)/target/linux/rdc/image/mkimg_bifferboard.py $(KDIR)/bzImage $(KDIR)/root.$(1) \
+ $(BIN_DIR)/$(IMG_PREFIX)-$(1)-bifferboard.img
+endef
+
+define Image/Prepare
+ $(CP) $(LINUX_DIR)/arch/x86/boot/bzImage $(KDIR)/bzImage
+ $(call Image/Prepare/bootscript)
+ $(call Image/Prepare/grub2)
+endef
+
+define Image/Build/Initramfs
+ $(CP) $(KDIR)/bzImage $(BIN_DIR)/$(IMG_PREFIX)-ramfs.bzImage
endef
define Image/Build
$(call Image/Build/$(1))
- $(call Image/Build/grub,$(1))
+ $(call Image/Build/bootscript,$(1))
+ ifneq ($(1),iso)
+ $(call Image/Build/grub2,$(1))
$(call Image/Build/vdi,$(1))
$(call Image/Build/vmdk,$(1))
- $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(1).fs
- $(CP) $(KDIR)/bzImage $(BIN_DIR)/openwrt-$(BOARD)-vmlinuz
+ $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/$(IMG_PREFIX)-rootfs-$(1).img
+ else
+ $(CP) $(KDIR)/root.iso $(BIN_DIR)/$(IMG_PREFIX).iso
+ endif
+ $(CP) $(KDIR)/bzImage $(BIN_DIR)/$(IMG_PREFIX)-vmlinuz
+ $(call Image/Build/gzip/$(1))
+ $(call Image/Build/Profile/$(PROFILE),$(1))
+ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
+ $(call Image/Build/Initramfs)
+endif
endef
$(eval $(call BuildImage))
-
-ifeq ($(CONFIG_X86_VDI_IMAGES),y)
- $(eval $(call RequireCommand,VBoxManage, \
- You need VBoxManage to generate VirtualBox images. \
- ))
-endif
-
-ifeq ($(CONFIG_X86_VMDK_IMAGES),y)
- $(eval $(call RequireCommand,qemu-img, \
- You need qemu-img to generate VMware images. \
- ))
-endif