ramips: Support for NexAira BC2

[librecmc/librecmc.git] / target / linux / ramips / rt305x / config-2.6.39

diff --git a/target/linux/ramips/rt305x/config-2.6.39 b/target/linux/ramips/rt305x/config-2.6.39
index 1f85b88155750a1c873018ee9a6a1cfe8fcd2766..5d7e4b12fdc5e9a010117a129ab91edfde12baff 100644 (file)
--- a/target/linux/ramips/rt305x/config-2.6.39
+++ b/target/linux/ramips/rt305x/config-2.6.39
@@ -28,8 +28,8 @@ CONFIG_CSRC_R4K=y
 CONFIG_CSRC_R4K_LIB=y
 CONFIG_DECOMPRESS_LZMA=y
 CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DWC_OTG is not set
 CONFIG_EARLY_PRINTK=y
-# CONFIG_FSNOTIFY is not set
 CONFIG_GENERIC_ATOMIC64=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -65,6 +65,7 @@ CONFIG_IMAGE_CMDLINE_HACK=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_IRQ_CPU=y
 # CONFIG_LEDS_GPIO is not set
+CONFIG_M25PXX_USE_FAST_READ=y
 CONFIG_MACH_NO_WESTBRIDGE=y
 # CONFIG_MII is not set
 # CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
@@ -76,6 +77,7 @@ CONFIG_MIPS_RALINK=y
 CONFIG_MIPS_RAMIPS_NET=y
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_M25P80=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
@@ -89,21 +91,32 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y
 # CONFIG_RALINK_RT288X is not set
 CONFIG_RALINK_RT305X=y
 CONFIG_RAMIPS_WDT=y
+CONFIG_RT305X_MACH_ARGUS_ATP52B=y
+CONFIG_RT305X_MACH_BC2=y
 CONFIG_RT305X_MACH_DIR_300_REVB=y
 CONFIG_RT305X_MACH_F5D8235_V2=y
 CONFIG_RT305X_MACH_FONERA20N=y
 CONFIG_RT305X_MACH_HW550_3G=y
 CONFIG_RT305X_MACH_MOFI3500_3GN=y
+CONFIG_RT305X_MACH_NBG_419N=y
+CONFIG_RT305X_MACH_NW718=y
 CONFIG_RT305X_MACH_PWH2004=y
+CONFIG_RT305X_MACH_RT_G32_REVB=y
 CONFIG_RT305X_MACH_V22RW_2X2=y
 CONFIG_RT305X_MACH_WCR150GN=y
 CONFIG_RT305X_MACH_WHR_G300N=y
+CONFIG_RT305X_MACH_WR512_3GN=y
 # CONFIG_SCSI_DMA is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RT288X=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 CONFIG_SOC_RT305X=y
+CONFIG_SPI=y
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_RAMIPS=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_SYS_HAS_CPU_MIPS32_R2=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
@@ -111,7 +124,6 @@ CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_XZ_DEC=y