# RT288X Profiles
#
-# Airlink101 AR670W -- LZMA without uImage header
-define BuildFirmware/AR670W/squashfs
- $(call PatchKernelLzmaDtb,$(2),$(3),$(5))
-
- $(eval output_name=$(IMG_PREFIX)-$(2)-$(1)-$(if $(4),$(4),sysupgrade).bin)
- $(eval factory_name=$(IMG_PREFIX)-$(2)-$(1)-factory.bin)
-
- ( dd if=$(KDIR)/vmlinux-$(2).bin.lzma bs=65536 \
- conv=sync; dd if=$(KDIR)/root.$(1) ) > $(KDIR)/$(output_name)
-
- $(call prepare_generic_squashfs,$(KDIR)/$(output_name))
-
- if [ `stat -c%s "$(KDIR)/$(output_name)"` \
- -gt $(ralink_default_fw_size_4M) ]; then \
- echo "Warning: $(KDIR)/$(output_name) is too big" >&2; \
- else \
- mkwrgimg -i $(KDIR)/$(output_name) \
- -d "/dev/mtdblock/2" \
- -s "wrgn16a_airlink_ar670w" \
- -o $(BIN_DIR)/$(factory_name); \
- $(CP) $(KDIR)/$(output_name) $(BIN_DIR)/$(output_name); \
+define Build/gemtek-header
+ if [ -f $@ ]; then \
+ mkheader_gemtek $@ $@.new $(1) && \
+ mv $@.new $@; \
fi
endef
-define BuildFirmware/Gemtek/squashfs
- $(call BuildFirmware/Default4M/$(1),$(1),$(2),$(3))
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- mkheader_gemtek "$(call sysupname,$(1),$(2))" \
- "$(call imgname,$(1),$(2))-factory.bin" $(2) || \
- rm -f "$(call imgname,$(1),$(2))-factory.bin"; \
- fi
+define Device/ar670w
+ DTS := AR670W
+ BLOCKSIZE := 64k
+ DEVICE_TITLE := Airlink AR670W
+ IMAGE_SIZE := $(ralink_default_fw_size_4M)
+ KERNEL := $(KERNEL_DTB) | pad-to $$(BLOCKSIZE)
+ IMAGES += factory.bin
+ IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+ wrg-header wrgn16a_airlink_ar670w
+endef
+TARGET_DEVICES += ar670w
+
+define Device/ar725w
+ DTS := AR725W
+ DEVICE_TITLE := Airlink AR725W
+ IMAGES += factory.bin
+ IMAGE/factory.bin := $$(sysupgrade_bin) | check-size 3328k | \
+ gemtek-header ar725w
+endef
+TARGET_DEVICES += ar725w
+
+define Device/dlink_dap-1522-a1
+ DTS := DAP-1522-A1
+ BLOCKSIZE := 64k
+ IMAGE_SIZE := 3801088
+ DEVICE_TITLE := D-Link DAP-1522 A1
+ DEVICE_PACKAGES := kmod-switch-rtl8366s
+ KERNEL := $(KERNEL_DTB)
+ IMAGES += factory.bin
+ IMAGE/factory.bin := \
+ append-kernel | pad-offset $$$$(BLOCKSIZE) 96 | \
+ append-rootfs | pad-rootfs -x 96 | \
+ wrg-header wapnd01_dlink_dap1522 | \
+ check-size $$$$(IMAGE_SIZE)
endef
-BuildFirmware/Gemtek/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
+TARGET_DEVICES += dlink_dap-1522-a1
+define Device/f5d8235-v1
+ DTS := F5D8235_V1
+ IMAGE_SIZE := 7744k
+ DEVICE_TITLE := Belkin F5D8235 V1
+ DEVICE_PACKAGES := kmod-switch-rtl8366s kmod-usb-core kmod-usb-ohci \
+ kmod-usb-ohci-pci kmod-usb2 kmod-usb2-pci kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += f5d8235-v1
-Image/Build/Profile/AR670W=$(call BuildFirmware/AR670W/$(1),$(1),ar670w,AR670W)
-Image/Build/Profile/AR725W=$(call BuildFirmware/Gemtek/$(1),$(1),ar725w,AR725W)
-# 0x790000
-belkin_f5d8235v1_mtd_size=7929856
-Image/Build/Profile/F5D8235V1=$(call BuildFirmware/CustomFlash/$(1),$(1),f5d8235v1,F5D8235_V1,$(belkin_f5d8235v1_mtd_size))
-Image/Build/Profile/RTN15=$(call BuildFirmware/Default4M/$(1),$(1),rt-n15,RT-N15)
-Image/Build/Profile/V11STFE=$(call BuildFirmware/Default4M/$(1),$(1),v11st-fe,V11STFE)
-Image/Build/Profile/WLITX4AG300N=$(call BuildFirmware/Default4M/$(1),$(1),wli-tx4-ag300n,WLI-TX4-AG300N)
-Image/Build/Profile/WZRAGL300NH=$(call BuildFirmware/Default4M/$(1),$(1),wzr-agl300nh,WZR-AGL300NH)
+define Device/rt-n15
+ DTS := RT-N15
+ BLOCKSIZE := 64k
+ IMAGE_SIZE := $(ralink_default_fw_size_4M)
+ DEVICE_TITLE := Asus RT-N15
+ DEVICE_PACKAGES := kmod-switch-rtl8366s
+endef
+TARGET_DEVICES += rt-n15
+define Device/v11st-fe
+ DTS := V11STFE
+ BLOCKSIZE := 64k
+ IMAGE_SIZE := $(ralink_default_fw_size_4M)
+ DEVICE_TITLE := Ralink V11ST-FE
+endef
+TARGET_DEVICES += v11st-fe
+
+define Device/wli-tx4-ag300n
+ DTS := WLI-TX4-AG300N
+ BLOCKSIZE := 64k
+ IMAGE_SIZE := $(ralink_default_fw_size_4M)
+ DEVICE_TITLE := Buffalo WLI-TX4-AG300N
+ DEVICE_PACKAGES := kmod-switch-ip17xx
+endef
+TARGET_DEVICES += wli-tx4-ag300n
-define Image/Build/Profile/Default
- $(call Image/Build/Profile/AR670W,$(1))
- $(call Image/Build/Profile/AR725W,$(1))
- $(call Image/Build/Profile/F5D8235V1,$(1))
- $(call Image/Build/Profile/RTN15,$(1))
- $(call Image/Build/Profile/V11STFE,$(1))
- $(call Image/Build/Profile/WLITX4AG300N,$(1))
- $(call Image/Build/Profile/WZRAGL300NH,$(1))
+define Device/wzr-agl300nh
+ DTS := WZR-AGL300NH
+ BLOCKSIZE := 64k
+ IMAGE_SIZE := $(ralink_default_fw_size_4M)
+ DEVICE_TITLE := Buffalo WZR-AGL300NH
+ DEVICE_PACKAGES := kmod-switch-rtl8366s
endef
+TARGET_DEVICES += wzr-agl300nh