kernel: remove non-existant symbols

[oweals/openwrt.git] / target / linux / ramips / dts / mt7620a_netgear_ex3700.dts

diff --git a/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts b/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts
index 311f27781d1a682207359c83c0ffe8f53b67f4b0..f657e926cbff87fd4bc3da9626631ce1de078478 100644 (file)
--- a/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts
+++ b/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts
@@ -2,10 +2,7 @@
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "mt7620a.dtsi"
+#include "mt7620a_netgear_ex3700_ex6130.dtsi"
 
 / {
        compatible = "netgear,ex3700", "ralink,mt7620a-soc";
@@ -18,10 +15,6 @@
                led-upgrade = &led_power_green;
        };
 
-       chosen {
-               bootargs = "console=ttyS0,57600";
-       };
-
        leds {
                compatible = "gpio-leds";
 
@@ -61,109 +54,4 @@
                        gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
                };
        };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-};
-
-&gpio0 {
-       status = "okay";
-};
-
-&gpio2 {
-       status = "okay";
-};
-
-&spi0 {
-       status = "okay";
-
-       m25p80@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <10000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x30000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "config";
-                               reg = <0x30000 0x10000>;
-                               read-only;
-                       };
-
-                       factory: partition@40000 {
-                               label = "factory";
-                               reg = <0x40000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@50000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x50000 0x790000>;
-                       };
-
-                       partition@7e0000 {
-                               label = "board_data";
-                               reg = <0x7e0000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@7f0000 {
-                               label = "nvram";
-                               reg = <0x7f0000 0x10000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pcie {
-       status = "okay";
-};
-
-&pcie0 {
-       mt76@0,0 {
-               reg = <0x0000 0 0 0 0 >;
-               mediatek,mtd-eeprom = <&factory 0x8000>;
-               ieee80211-freq-limit = <5000000 6000000>;
-       };
-};
-
-&ethernet {
-       mtd-mac-address = <&factory 0x28>;
-};
-
-&wmac {
-       ralink,mtd-eeprom = <&factory 0x0>;
-};
-
-&pinctrl {
-       state_default: pinctrl0 {
-               default {
-                       ralink,group = "i2c", "rgmii2", "spi refclk";
-                       ralink,function = "gpio";
-               };
-       };
 };