ramips: fix edimax 6200nl switch config

[oweals/openwrt.git] / target / linux / ramips / dts / WZR-AGL300NH.dts

diff --git a/target/linux/ramips/dts/WZR-AGL300NH.dts b/target/linux/ramips/dts/WZR-AGL300NH.dts
index 02989bee1522f6e21e7dd647b04f0d83f1d62aaf..23fba7cb8fd1e2dca4cbe7fcf0097f46a3d12c31 100644 (file)
--- a/target/linux/ramips/dts/WZR-AGL300NH.dts
+++ b/target/linux/ramips/dts/WZR-AGL300NH.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "rt2880.dtsi"
+#include "rt2880.dtsi"
 
 / {
        #address-cells = <1>;
@@ -8,19 +8,12 @@
        compatible = "WZR-AGL300NH", "ralink,rt2880-soc";
        model = "Buffalo WZR-AGL300NH";
 
-       palmbus@300000 {
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-       };
-
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "i2c", "uartlite", "mdio";
-                               ralink,function = "gpio";
-                       };
-               };
+       pci@440000 {
+               compatible = "ralink,rt288x-pci";
+               reg = <0x00440000 0x20000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               status = "ok";
        };
 
        cfi@1f000000 {
@@ -55,34 +48,12 @@
                };
        };
 
-       ethernet@400000 {
-               status = "okay";
-               mtd-mac-address = <&factory 0x4>;
-
-               port@0 {
-                       mediatek,fixed-link = <1000 1 1 1>;
-               };
-
-               mdio-bus {
-                       status = "okay";
-
-                       phy0: ethernet-phy@0 {
-                               phy-mode = "mii";
-                               reg = <0>;
-                       };
-               };
-       };
-
        rtl8366s {
                compatible = "realtek,rtl8366s";
                gpio-sda = <&gpio0 1 0>;
                gpio-sck = <&gpio0 2 0>;
        };
 
-       wmac@480000 {
-               ralink,mtd-eeprom = <&factory 0>;
-       };
-
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
@@ -131,13 +102,39 @@
                        gpios = <&gpio0 13 1>;
                };
        };
+};
 
+&gpio0 {
+       status = "okay";
+};
 
-       pcibus0: pci@00440000 {
-               compatible = "ralink,rt288x-pci";
-               reg = <0x00440000 0x20000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-               status = "ok";
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "uartlite", "mdio";
+                       ralink,function = "gpio";
+               };
        };
 };
+
+&ethernet {
+       status = "okay";
+       mtd-mac-address = <&factory 0x4>;
+
+       port@0 {
+               mediatek,fixed-link = <1000 1 1 1>;
+       };
+
+       mdio-bus {
+               status = "okay";
+
+               phy0: ethernet-phy@0 {
+                       phy-mode = "mii";
+                       reg = <0>;
+               };
+       };
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};