treewide: dts: use keycode defines from input dt-binding

[oweals/openwrt.git] / target / linux / ramips / dts / WHR-G300N.dts

diff --git a/target/linux/ramips/dts/WHR-G300N.dts b/target/linux/ramips/dts/WHR-G300N.dts
index d919405ce3effe9f533f3bdd1b4126a6d697fc8f..c0779e25bddad746c5f17098cc356e8cb3332145 100644 (file)
--- a/target/linux/ramips/dts/WHR-G300N.dts
+++ b/target/linux/ramips/dts/WHR-G300N.dts
@@ -1,60 +1,35 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
+
+#include <dt-bindings/input/input.h>
 
 / {
        compatible = "WHR-G300N", "ralink,rt3052-soc";
        model = "Buffalo WHR-G300N";
 
-       memorydetect {
-               ralink,memory = <0x0 0x200000 0x4000000>;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,57600";
-       };
-
-       palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-       };
-
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
                #size-cells = <1>;
        };
 
-       ethernet@10100000 {
-               status = "okay";
-       };
-
-       esw@10110000 {
-               status = "okay";
-               ralink,portmap = <0x2f>;
-       };
-
        gpio-leds {
                compatible = "gpio-leds";
+
                diag {
                        label = "whr-g300n:red:diag";
                        gpios = <&gpio0 7 1>;
                };
+
                router {
                        label = "whr-g300n:green:router";
                        gpios = <&gpio0 9 1>;
                };
+
                security {
                        label = "whr-g300n:amber:security";
                        gpios = <&gpio0 14 1>;
@@ -66,29 +41,48 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
                reset {
                        label = "reset";
                        gpios = <&gpio0 10 1>;
-                       linux,code = <0x198>;
+                       linux,code = <KEY_RESTART>;
                };
+
                aoss {
                        label = "aoss";
                        gpios = <&gpio0 0 1>;
-                       linux,code = <0x211>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
+
                router-off {
                        label = "router-off";
                        gpios = <&gpio0 11 1>;
-                       linux,code = <0x102>;
+                       linux,code = <BTN_2>;
                };
+
                router-on {
                        label = "router-on";
                        gpios = <&gpio0 8 1>;
-                       linux,code = <0x103>;
+                       linux,code = <BTN_3>;
                };
        };
+};
 
-       wmac@10180000 {
-               status = "okay";
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+                       ralink,function = "gpio";
+               };
        };
 };
+
+&esw {
+       mediatek,portmap = <0x2f>;
+};
+
+/* FIXME: no partitions defined */
+/*&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+*/