/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
- compatible = "3G-6200N", "ralink,rt3050-soc";
- model = "Edimax 3g-6200n";
-
- memorydetect {
- ralink,memory = <0x0 0x200000 0x4000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,128k@0x3e0000(cimage)ro,3648k@0x50000(firmware)";
- };
-
- palmbus@10000000 {
- sysc@0 {
- ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
- ralink,uartmux = "gpio";
- ralink,wdtmux = <1>;
- };
-
- gpio0: gpio@600 {
- status = "okay";
- };
-
- };
+ compatible = "3G-6200NL", "ralink,rt3050-soc";
+ model = "Edimax 3g-6200nl";
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
- };
- ethernet@10100000 {
- status = "okay";
- };
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
- esw@10110000 {
- status = "okay";
- ralink,portmap = <0x2f>;
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@3e0000 {
+ label = "cimage";
+ reg = <0x3e0000 0x20000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x390000>;
+ };
};
gpio-leds {
compatible = "gpio-leds";
+
wlan {
- label = "edimax:amber:wlan";
+ label = "3g-6200nl:amber:wlan";
gpios = <&gpio0 14 1>;
};
};
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
+
wps {
label = "wps";
gpios = <&gpio0 12 1>;
linux,code = <0x211>;
};
};
+};
- wmac@10180000 {
- status = "okay";
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
+ };
};
+};
- otg@101c0000 {
- status = "okay";
- };
+ðernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+ mediatek,portdisable = <0x37>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+ status = "okay";
};