-Index: linux-3.7-rc8/arch/mips/lantiq/xway/Makefile
-===================================================================
---- linux-3.7-rc8.orig/arch/mips/lantiq/xway/Makefile 2012-12-13 10:59:54.176314899 +0100
-+++ linux-3.7-rc8/arch/mips/lantiq/xway/Makefile 2012-12-13 13:58:51.696584083 +0100
-@@ -1,3 +1,5 @@
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -1,3 +1,6 @@
obj-y := prom.o sysctrl.o clk.o reset.o dma.o timer.o dcdc.o
-+obj-y += ath_eep.o rt_eep.o eth_mac.o
++obj-y += eth_mac.o
++obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o
+
obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
-Index: linux-3.7-rc8/arch/mips/lantiq/xway/ath_eep.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.7-rc8/arch/mips/lantiq/xway/ath_eep.c 2012-12-13 13:49:12.472569552 +0100
-@@ -0,0 +1,120 @@
+--- /dev/null
++++ b/arch/mips/lantiq/xway/ath_eep.c
+@@ -0,0 +1,195 @@
+/*
++ * Copyright (C) 2011 Luca Olivetti <luca@ventoso.org>
+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2011 Andrej Vlašić <andrej.vlasic0@gmail.com>
++ * Copyright (C) 2013 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+#include <linux/ath5k_platform.h>
+#include <linux/ath9k_platform.h>
+#include <linux/pci.h>
++#include <pci-ath-fixup.h>
+
+extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
+struct ath5k_platform_data ath5k_pdata;
-+/*struct ath9k_platform_data ath9k_pdata = {
++struct ath9k_platform_data ath9k_pdata = {
+ .led_pin = -1,
-+ .endian_check = true,
-+};*/
-+static u16 ath5k_eeprom_data[ATH5K_PLAT_EEP_MAX_WORDS];
-+//static u16 ath9k_eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS];
++};
+static u8 athxk_eeprom_mac[6];
+
-+/*static int
-+ath9k_pci_plat_dev_init(struct pci_dev *dev)
++static int ath9k_pci_plat_dev_init(struct pci_dev *dev)
+{
+ dev->dev.platform_data = &ath9k_pdata;
+ return 0;
+}
+
-+void __init
-+ltq_register_ath9k(u16 *eeprom_data, u8 *macaddr)
++int __init of_ath9k_eeprom_probe(struct platform_device *pdev)
+{
-+ memcpy(ath9k_pdata.eeprom_data, eeprom_data, sizeof(ath9k_pdata.eeprom_data));
-+ ath9k_pdata.macaddr = macaddr;
++ struct device_node *np = pdev->dev.of_node;
++ struct resource *eep_res, *mac_res;
++ void __iomem *eep, *mac;
++ int mac_offset;
++ u32 mac_inc = 0, pci_slot = 0;
++ int i;
++
++ eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++
++ if (!eep_res) {
++ dev_err(&pdev->dev, "failed to load eeprom address\n");
++ return -ENODEV;
++ }
++ if (resource_size(eep_res) != ATH9K_PLAT_EEP_MAX_WORDS << 1) {
++ dev_err(&pdev->dev, "eeprom has an invalid size\n");
++ return -EINVAL;
++ }
++
++ eep = ioremap(eep_res->start, resource_size(eep_res));
++ memcpy_fromio(ath9k_pdata.eeprom_data, eep, ATH9K_PLAT_EEP_MAX_WORDS << 1);
++
++ if (of_find_property(np, "ath,eep-swap", NULL))
++ for (i = 0; i < ATH9K_PLAT_EEP_MAX_WORDS; i++)
++ ath9k_pdata.eeprom_data[i] = swab16(ath9k_pdata.eeprom_data[i]);
++
++ if (of_find_property(np, "ath,eep-endian", NULL)) {
++ ath9k_pdata.endian_check = true;
++
++ dev_info(&pdev->dev, "endian check enabled.\n");
++ }
++
++ if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
++ memcpy_fromio(athxk_eeprom_mac, (void*) ath9k_pdata.eeprom_data + mac_offset, 6);
++ } else if (mac_res) {
++ if (resource_size(mac_res) != 6) {
++ dev_err(&pdev->dev, "mac has an invalid size\n");
++ return -EINVAL;
++ }
++ mac = ioremap(mac_res->start, resource_size(mac_res));
++ memcpy_fromio(athxk_eeprom_mac, mac, 6);
++ } else {
++ dev_warn(&pdev->dev, "using random mac\n");
++ random_ether_addr(athxk_eeprom_mac);
++ }
++
++ if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
++ athxk_eeprom_mac[5] += mac_inc;
++
++ ath9k_pdata.macaddr = athxk_eeprom_mac;
+ ltq_pci_plat_dev_init = ath9k_pci_plat_dev_init;
++
++ if (!of_property_read_u32(np, "ath,pci-slot", &pci_slot)) {
++ ltq_pci_ath_fixup(pci_slot, ath9k_pdata.eeprom_data);
++
++ dev_info(&pdev->dev, "pci slot: %u\n", pci_slot);
++ }
++
++ dev_info(&pdev->dev, "loaded ath9k eeprom\n");
++
++ return 0;
++}
++
++static struct of_device_id ath9k_eeprom_ids[] = {
++ { .compatible = "ath9k,eeprom" },
++ { }
++};
++
++static struct platform_driver ath9k_eeprom_driver = {
++ .driver = {
++ .name = "ath9k,eeprom",
++ .owner = THIS_MODULE,
++ .of_match_table = of_match_ptr(ath9k_eeprom_ids),
++ },
++};
++
++static int __init of_ath9k_eeprom_init(void)
++{
++ return platform_driver_probe(&ath9k_eeprom_driver, of_ath9k_eeprom_probe);
+}
-+*/
++late_initcall(of_ath9k_eeprom_init);
++
++
+static int ath5k_pci_plat_dev_init(struct pci_dev *dev)
+{
+ dev->dev.platform_data = &ath5k_pdata;
+ dev_err(&pdev->dev, "failed to load eeprom address\n");
+ return -ENODEV;
+ }
-+ if (resource_size(eep_res) != ATH5K_PLAT_EEP_MAX_WORDS) {
++ if (resource_size(eep_res) != ATH5K_PLAT_EEP_MAX_WORDS << 1) {
+ dev_err(&pdev->dev, "eeprom has an invalid size\n");
+ return -EINVAL;
+ }
+
+ eep = ioremap(eep_res->start, resource_size(eep_res));
-+ memcpy_fromio(ath5k_eeprom_data, eep, ATH5K_PLAT_EEP_MAX_WORDS);
++ memcpy_fromio(ath5k_pdata.eeprom_data, eep, ATH5K_PLAT_EEP_MAX_WORDS << 1);
+
+ if (of_find_property(np, "ath,eep-swap", NULL))
-+ for (i = 0; i < (ATH5K_PLAT_EEP_MAX_WORDS >> 1); i++)
-+ ath5k_eeprom_data[i] = swab16(ath5k_eeprom_data[i]);
++ for (i = 0; i < ATH5K_PLAT_EEP_MAX_WORDS; i++)
++ ath5k_pdata.eeprom_data[i] = swab16(ath5k_pdata.eeprom_data[i]);
+
+ if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
-+ memcpy_fromio(athxk_eeprom_mac, (void*) ath5k_eeprom_data, 6);
++ memcpy_fromio(athxk_eeprom_mac, (void*) ath5k_pdata.eeprom_data + mac_offset, 6);
+ } else if (mac_res) {
+ if (resource_size(mac_res) != 6) {
+ dev_err(&pdev->dev, "mac has an invalid size\n");
+ if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
+ athxk_eeprom_mac[5] += mac_inc;
+
-+ ath5k_pdata.eeprom_data = ath5k_eeprom_data;
+ ath5k_pdata.macaddr = athxk_eeprom_mac;
+ ltq_pci_plat_dev_init = ath5k_pci_plat_dev_init;
+
+{
+ return platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe);
+}
-+device_initcall(of_ath5k_eeprom_init);
-Index: linux-3.7-rc8/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-===================================================================
---- linux-3.7-rc8.orig/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h 2012-12-13 10:59:57.300314976 +0100
-+++ linux-3.7-rc8/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h 2012-12-13 10:59:57.308314977 +0100
-@@ -93,5 +93,8 @@
- /* allow tapi driver to read the gptu value */
- long gptu_get_count(struct clk *clk);
++late_initcall(of_ath5k_eeprom_init);
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -90,5 +90,8 @@ int xrx200_gphy_boot(struct device *dev,
+ extern void ltq_pmu_enable(unsigned int module);
+ extern void ltq_pmu_disable(unsigned int module);
+/* allow the ethernet driver to load a flash mapped mac addr */
+const u8* ltq_get_eth_mac(void);
+
#endif /* CONFIG_SOC_TYPE_XWAY */
#endif /* _LTQ_XWAY_H__ */
-Index: linux-3.7-rc8/arch/mips/lantiq/xway/eth_mac.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.7-rc8/arch/mips/lantiq/xway/eth_mac.c 2012-12-13 10:59:57.308314977 +0100
+--- /dev/null
++++ b/arch/mips/lantiq/xway/eth_mac.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ return platform_driver_probe(ð_mac_driver, of_eth_mac_probe);
+}
+device_initcall(of_eth_mac_init);
-Index: linux-3.7-rc8/drivers/net/ethernet/lantiq_etop.c
-===================================================================
---- linux-3.7-rc8.orig/drivers/net/ethernet/lantiq_etop.c 2012-12-13 10:59:54.176314899 +0100
-+++ linux-3.7-rc8/drivers/net/ethernet/lantiq_etop.c 2012-12-13 10:59:57.308314977 +0100
-@@ -816,7 +816,8 @@
+--- a/drivers/net/ethernet/lantiq_etop.c
++++ b/drivers/net/ethernet/lantiq_etop.c
+@@ -825,7 +825,8 @@ ltq_etop_init(struct net_device *dev)
ltq_etop_change_mtu(dev, 1500);
if (!is_valid_ether_addr(mac.sa_data)) {
pr_warn("etop: invalid MAC, using random\n");
random_ether_addr(mac.sa_data);
-@@ -940,7 +941,9 @@
+@@ -949,7 +950,9 @@ ltq_etop_probe(struct platform_device *p
priv->tx_irq = irqres[0].start;
priv->rx_irq = irqres[1].start;
priv->mii_mode = of_get_phy_mode(pdev->dev.of_node);
priv->clk_ppe = clk_get(&pdev->dev, NULL);
if (IS_ERR(priv->clk_ppe))
-Index: linux-3.7-rc8/arch/mips/lantiq/xway/rt_eep.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.7-rc8/arch/mips/lantiq/xway/rt_eep.c 2012-12-13 13:55:43.132579350 +0100
+--- /dev/null
++++ b/arch/mips/lantiq/xway/rt_eep.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ return platform_driver_probe(&ralink_eeprom_driver, of_ralink_eeprom_probe);
+}
+device_initcall(of_ralink_eeprom_init);
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
+@@ -0,0 +1,6 @@
++#ifndef _PCI_ATH_FIXUP
++#define _PCI_ATH_FIXUP
++
++void ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) __init;
++
++#endif /* _PCI_ATH_FIXUP */
+--- /dev/null
++++ b/arch/mips/lantiq/xway/pci-ath-fixup.c
+@@ -0,0 +1,109 @@
++/*
++ * Atheros AP94 reference board PCI initialization
++ *
++ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <lantiq_soc.h>
++
++#define LTQ_PCI_MEM_BASE 0x18000000
++
++struct ath_fixup {
++ u16 *cal_data;
++ unsigned slot;
++};
++
++static int ath_num_fixups;
++static struct ath_fixup ath_fixups[2];
++
++static void ath_pci_fixup(struct pci_dev *dev)
++{
++ void __iomem *mem;
++ u16 *cal_data = NULL;
++ u16 cmd;
++ u32 bar0;
++ u32 val;
++ unsigned i;
++
++ for (i = 0; i < ath_num_fixups; i++) {
++ if (ath_fixups[i].cal_data == NULL)
++ continue;
++
++ if (ath_fixups[i].slot != PCI_SLOT(dev->devfn))
++ continue;
++
++ cal_data = ath_fixups[i].cal_data;
++ break;
++ }
++
++ if (cal_data == NULL)
++ return;
++
++ if (*cal_data != 0xa55a) {
++ pr_err("pci %s: invalid calibration data\n", pci_name(dev));
++ return;
++ }
++
++ pr_info("pci %s: fixup device configuration\n", pci_name(dev));
++
++ mem = ioremap(LTQ_PCI_MEM_BASE, 0x10000);
++ if (!mem) {
++ pr_err("pci %s: ioremap error\n", pci_name(dev));
++ return;
++ }
++
++ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
++ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, LTQ_PCI_MEM_BASE);
++ pci_read_config_word(dev, PCI_COMMAND, &cmd);
++ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
++ pci_write_config_word(dev, PCI_COMMAND, cmd);
++
++ /* set pointer to first reg address */
++ cal_data += 3;
++ while (*cal_data != 0xffff) {
++ u32 reg;
++ reg = *cal_data++;
++ val = *cal_data++;
++ val |= (*cal_data++) << 16;
++
++ ltq_w32(swab32(val), mem + reg);
++ udelay(100);
++ }
++
++ pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
++ dev->vendor = val & 0xffff;
++ dev->device = (val >> 16) & 0xffff;
++
++ pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
++ dev->revision = val & 0xff;
++ dev->class = val >> 8; /* upper 3 bytes */
++
++ pr_info("pci %s: fixup info: [%04x:%04x] revision %02x class %#08x\n",
++ pci_name(dev), dev->vendor, dev->device, dev->revision, dev->class);
++
++ pci_read_config_word(dev, PCI_COMMAND, &cmd);
++ cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
++ pci_write_config_word(dev, PCI_COMMAND, cmd);
++
++ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
++
++ iounmap(mem);
++}
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath_pci_fixup);
++
++void __init ltq_pci_ath_fixup(unsigned slot, u16 *cal_data)
++{
++ if (ath_num_fixups >= ARRAY_SIZE(ath_fixups))
++ return;
++
++ ath_fixups[ath_num_fixups].slot = slot;
++ ath_fixups[ath_num_fixups].cal_data = cal_data;
++ ath_num_fixups++;
++}
projects / librecmc / librecmc.git / blobdiff