bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
leds {
- boot = &power;
- failsafe = &power2;
- running = &power;
+ boot = &power_green;
+ failsafe = &power_red;
+ running = &power_green;
dsl = &dsl;
internet = &internet_green;
#address-cells = <1>;
#size-cells = <1>;
- boardconfig: partition@fe0000 {
- label = "board_config";
- reg = <0xfe0000 0x20000>;
- read-only;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boardconfig: partition@fe0000 {
+ label = "board_config";
+ reg = <0xfe0000 0x20000>;
+ read-only;
+ };
};
};
};
pinctrl-0 = <&state_default>;
state_default: pinmux {
- ip101a-rst {
- lantiq,pins = "io46";
- lantiq,output = <0>;
- lantiq,pull = <1>;
- };
gphy-leds {
- lantiq,groups = "gphy0 led1",
+ lantiq,groups = "gphy0 led0", "gphy0 led1",
"gphy1 led0", "gphy1 led1";
lantiq,function = "gphy";
lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- stp {
- lantiq,groups = "stp";
- lantiq,function = "stp";
lantiq,pull = <2>;
- lantiq,open-drain = <0>;
lantiq,output = <1>;
};
mdio {
lantiq,pull = <0>;
lantiq,output = <1>;
};
- spi {
- lantiq,groups = "spi";
- lantiq,function = "spi";
- };
- };
- };
-
- eth@E108000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-net";
- reg = < 0xE108000 0x3000 /* switch */
- 0xE10B100 0x70 /* mdio */
- 0xE10B1D8 0x30 /* mii */
- 0xE10B308 0x30 /* pmac */
- >;
- interrupt-parent = <&icu0>;
- interrupts = <73 72>;
-
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mtd-mac-address = <&boardconfig 0x16>;
- lantiq,switch;
-
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "mii";
- phy-handle = <&phy11>;
- };
- ethernet@3 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <3>;
- phy-mode = "mii";
- phy-handle = <&phy12>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "mii";
- phy-handle = <&phy13>;
- };
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "mii";
- phy-handle = <&phy14>;
- };
- };
-
- mdio@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy12: ethernet-phy@12 {
- reg = <0x12>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy14: ethernet-phy@14 {
- reg = <0x14>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
};
};
- stp: stp@E100BB0 {
- compatible = "lantiq,gpio-stp-xway";
- reg = <0xE100BB0 0x40>;
- #gpio-cells = <2>;
- gpio-controller;
-
- lantiq,shadow = <0xff>;
- lantiq,groups = <0x1>;
- lantiq,dsl = <0x0>;
- lantiq,phy1 = <0x7>;
- lantiq,phy2 = <0x7>; /* enable gphy0 led2 = LAN2 LED */
- };
-
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 47 0>;
compatible = "gpio-leds";
dsl: dsl {
- label = "dsl";
+ label = "vgv7510kw22:green:dsl";
gpios = <&gpio 2 1>;
};
internet_red {
- label = "internet_red";
+ label = "vgv7510kw22:red:internet";
gpios = <&gpio 10 1>;
};
info_red {
- label = "info_red";
+ label = "vgv7510kw22:red:info";
gpios = <&gpio 12 1>;
};
- power: power {
- label = "power"; /* green */
+ power_green: power {
+ label = "vgv7510kw22:green:power";
gpios = <&gpio 14 1>;
default-state = "keep";
};
info_green {
- label = "info_green";
+ label = "vgv7510kw22:green:info";
gpios = <&gpio 15 1>;
};
internet_green: internet_green {
- label = "internet_green";
+ label = "vgv7510kw22:green:internet";
gpios = <&gpio 19 1>;
};
wifi: wifi {
- label = "wifi";
+ label = "vgv7510kw22:green:wlan";
gpios = <&gpio 20 1>;
};
- power2: power2 {
- label = "power2"; /* red */
+ power_red: power2 {
+ label = "vgv7510kw22:red:power";
gpios = <&gpio 28 1>;
};
- phone_red {
- label = "phone_red";
+ phone {
+ label = "vgv7510kw22:green:telefon";
gpios = <&gpio 29 1>;
};
};
};
+
+ð0 {
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ mtd-mac-address = <&boardconfig 0x16>;
+ lantiq,switch;
+
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "mii";
+ phy-handle = <&phy11>;
+ };
+ ethernet@3 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <3>;
+ phy-mode = "mii";
+ phy-handle = <&phy12>;
+ };
+ ethernet@4 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "mii";
+ phy-handle = <&phy13>;
+ };
+ ethernet@5 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <5>;
+ phy-mode = "mii";
+ phy-handle = <&phy14>;
+ };
+ };
+
+ wan: interface@1 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ mtd-mac-address = <&boardconfig 0x16>;
+ mtd-mac-address-increment = <2>;
+ lantiq,wan;
+
+ ethernet@0 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <0>;
+ phy-mode = "mii";
+ phy-handle = <&phy1>;
+ };
+ };
+
+ mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22";
+ };
+
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ phy12: ethernet-phy@12 {
+ reg = <0x12>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ phy14: ethernet-phy@14 {
+ reg = <0x14>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};