/ {
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+
+ leds {
+ /* the power led can't be controlled, use the wps led instead */
+ boot = &wps;
+ failsafe = &wps;
+
+ dsl = &dsl;
+ internet = &internet;
+ usb = &usb0;
+ usb2 = &usb2;
+ };
};
memory@0 {
};
fpi@10000000 {
- spi@E100800 {
- compatible = "lantiq,spi-xway";
- reg = <0xE100800 0x100>;
- interrupt-parent = <&icu0>;
- interrupts = <22 23 24>;
- #address-cells = <1>;
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <3>;
- spi-max-frequency = <20000000>;
-
- partition@0 {
- reg = <0x0 0x20000>;
- label = "u-boot";
- read-only;
- };
-
- partition@20000 {
- reg = <0x20000 0x6a0000>;
- label = "firmware";
- };
-
- partition@6c0000 {
- reg = <0x6c0000 0x100000>;
- label = "dsl_fw";
- };
-
- partition@7c0000 {
- reg = <0x7c0000 0x10000>;
- label = "config";
- read-only;
- };
-
- ath9k_cal: partition@7d0000 {
- reg = <0x7d0000 0x30000>;
- label = "boardconfig";
- read-only;
- };
- };
- };
-
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
ath,mac-offset = <0xf100>;
ath,mac-increment;
ath,led-pin = <0>;
+ ath,disable-5ghz;
+ ath,led-active-high;
};
gpio-keys-polled {
gpio-leds {
compatible = "gpio-leds";
-
- dsl {
- label = "dsl";
+ /*
+ power is not controllable via gpio
+ */
+ dsl: dsl {
+ label = "tdw89x0:green:dsl";
gpios = <&gpio 4 0>;
};
- internet {
- label = "internet";
+ internet: internet {
+ label = "tdw89x0:green:internet";
gpios = <&gpio 5 0>;
};
- usb0 {
- label = "usb";
+ usb0: usb0 {
+ label = "tdw89x0:green:usb";
gpios = <&gpio 19 0>;
};
- usb2 {
- label = "usb2";
+ usb2: usb2 {
+ label = "tdw89x0:green:usb2";
gpios = <&gpio 20 0>;
};
- wps {
- label = "wps";
+ wps: wps {
+ label = "tdw89x0:green:wps";
gpios = <&gpio 37 0>;
};
};
};
+
+&spi {
+ status = "ok";
+
+ m25p80@3 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <3 0>;
+ spi-max-frequency = <33250000>;
+ m25p,fast-read;
+
+ partition@0 {
+ reg = <0x0 0x20000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@20000 {
+ reg = <0x20000 0x7a0000>;
+ label = "firmware";
+ };
+
+ partition@7c0000 {
+ reg = <0x7c0000 0x10000>;
+ label = "config";
+ read-only;
+ };
+
+ ath9k_cal: partition@7d0000 {
+ reg = <0x7d0000 0x30000>;
+ label = "boardconfig";
+ read-only;
+ };
+ };
+};