/dts-v1/;
-/include/ "vr9.dtsi"
+#include "TDW89X0.dtsi"
/ {
model = "TDW8970 - TP-LINK TD-W8970";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
- };
-
- memory@0 {
- reg = <0x0 0x4000000>;
- };
-
- fpi@10000000 {
- gpio: pinmux@E100B10 {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- mdio {
- lantiq,groups = "mdio";
- lantiq,function = "mdio";
- };
- gphy-leds {
- lantiq,groups = "gphy0 led1", "gphy1 led1";
- lantiq,function = "gphy";
- lantiq,pull = <2>;
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- };
- phy-rst {
- lantiq,pins = "io42";
- lantiq,pull = <0>;
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- };
- spi-in {
- lantiq,pins = "io16";
- lantiq,open-drain = <1>;
- lantiq,pull = <2>;
- };
- spi-out {
- lantiq,pins = "io10", "io17", "io18", "io21";
- lantiq,open-drain = <0>;
- lantiq,pull = <2>;
- };
- pcie-rst {
- lantiq,pins = "io38";
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- };
- };
-
- eth@E108000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-net";
- reg = < 0xE108000 0x3000 /* switch */
- 0xE10B100 0x70 /* mdio */
- 0xE10B1D8 0x30 /* mii */
- 0xE10B308 0x30 /* pmac */
- >;
- interrupt-parent = <&icu0>;
- interrupts = <73 72>;
-
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mac-address = [ 00 11 22 33 44 55 ];
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- // gpios = <&gpio 42 1>;
- };
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
- ethernet@3 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- };
-
- mdio@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy5: ethernet-phy@5 {
- reg = <0x5>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
- };
-
- ifxhcd@E101000 {
- status = "okay";
- gpios = <&gpio 33 0>;
- lantiq,portmask = <0x3>;
- };
- };
-
- gphy-xrx200 {
- compatible = "lantiq,phy-xrx200";
- firmware = "lantiq/vr9_phy11g_a2x.bin";
- phys = [ 00 01 ];
- };
-
- pcie {
- compatible = "lantiq,pcie-xway";
- };
-
- spi {
- #address-cells = <1>;
- #size-cells = <1>;
-
- compatible = "spi-gpio";
-
- gpio-miso = <&gpio 16 0>;
- gpio-mosi = <&gpio 17 0>;
- gpio-sck = <&gpio 18 0>;
- num-chipselects = <1>;
- cs-gpios = <&gpio 10 1>;
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "en25q64", "m25p80";
- reg = <0 0>;
- linux,modalias = "en25q64";
- spi-max-frequency = <1000000>;
-
- partition@0 {
- reg = <0x0 0x20000>;
- label = "u-boot";
- read-only;
- };
-
- partition@20000 {
- reg = <0x20000 0x7a0000>;
- label = "firmware";
- };
-
- partition@7c0000 {
- reg = <0x7c0000 0x10000>;
- label = "config";
- read-only;
- };
-
- ath9k_cal: partition@7d0000 {
- reg = <0x7d0000 0x30000>;
- label = "boardconfig";
- read-only;
- };
- };
- };
-
- ath9k_eep {
- compatible = "ath9k,eeprom";
- ath,eep-flash = <&ath9k_cal 0x21000>;
- ath,pci-slot = <0>;
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
- power {
- label = "reset";
- gpios = <&gpio 0 1>;
- linux,code = <0x100>;
- };
-
- wifi {
- label = "wifi";
- gpios = <&gpio 9 0>;
- linux,code = <0xf7>;
- linux,input-type = <5>; /* EV_SW */
- };
-
- wps {
- label = "wps";
- gpios = <&gpio 39 1>;
- linux,code = <0x211>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- adsl {
- label = "adsl";
- gpios = <&gpio 4 0>;
- };
- internet {
- label = "internet";
- gpios = <&gpio 5 0>;
- };
- usb0 {
- label = "usb";
- gpios = <&gpio 19 0>;
- };
- usb2 {
- label = "usb2";
- gpios = <&gpio 20 0>;
- };
- wps {
- label = "wps";
- gpios = <&gpio 37 0>;
- };
- };
};